energy dashboard P1 LAN not working

[steve01]

Hi,
I cant get a reading of electricity on the energy dashboard.
At the settings for energy dashboard I can not select the device at P1/Grid can only choose disabled.

hardware.JPG (88.34 KiB) Viewed 339 times

any ideas?

[steve01]

[waltervl]

Do you have devices activated for the P1 Hardware devices?
Can you show a list of the P1 devices in menu Setup - Devices?

[steve01]

sure thing;

devices.JPG (238.4 KiB) Viewed 316 times

[jvdz]

Why do you have that P1 device selected for Solar?
Think you should remove that and then check the dropdown for P1, which should contain Power (IDX 14)

[RonkA]

I see IDX 14 is set to unused(the little green arrow) click this to 'Add device'

[steve01]

Thanks RonkA,

Got a reading from the grid now, nice. Too bad the solar still reads 0 KW, according to the app of my inverter it should read 313W now.
In energy dashboard I have at Solar: Actual delivery L1+L2+L3.
At devices I cannot find the delivery of the solar inverter

devices2.JPG (239.8 KiB) Viewed 292 times

[jvdz]

Did you expect that reading from your p1?
You need to connect your solar inverter to domoticz first to be able to get those readings.

[steve01]

Eh yes, how else does my energy company know how much power I return to the grid with solar? I only knows my P1 data

[RonkA]

It seems your house has some serious power-balance issues.
As i can see from your screenshot you have a 1 fase inverter connected to L2, the majority of your power-consumtion is done on that fase also..
I assume your house was 1-fase that was upgraded to 3-fase to use 3-fase electric stove or somehing like that..
This can become an issue if the load on the fase spikes or drops the voltage outside the specification of 10% more or less than 230V..

Anyhoe.. Your inverter has to talk to Domoticz to tell it how much power it's producing.
This value minus the actual usage of your house gives the value the P1 meter wil show.. P1 meter doesn't care about your solar (or battery's) , it just sees how much current, and in what direction, is flowing trough it.

So..Find out how to get the values from your inverter into Domoticz...

[steve01]

It seems your house has some serious power-balance issues.
As i can see from your screenshot you have a 1 fase inverter connected to L2, the majority of your power-consumtion is done on that fase also..
I assume your house was 1-fase that was upgraded to 3-fase to use 3-fase electric stove or somehing like that..
This can become an issue if the load on the fase spikes or drops the voltage outside the specification of 10% more or less than 230V..

Anyhoe.. Your inverter has to talk to Domoticz to tell it how much power it's producing.
This value minus the actual usage of your house gives the value the P1 meter wil show.. P1 meter doesn't care about your solar (or battery's) , it just sees how much current, and in what direction, is flowing trough it.

So..Find out how to get the values from your inverter into Domoticz...

Ok, bedankt RonkA
Bovenstaande klopt inderdaad, tot op heden geen problemen met de netspanning dus laat het ff zo. Ik ga eens uitzoeken hoe ik mn Solax X1 aan Domoticz kan koppelen
mvg