Blockly examples

[Ron]

This works for me
(but my wife doesn't like it so it is now switched off)

Only dim values depending on the "dark on" and "dark off" value.

Badkamer verlichting met standen.jpg (85.47 KiB) Viewed 2944 times

Dim value depending on the "dark on" and "dark off" value and use of a motion sensor:

Badkamer verlichting met sensor en standen.jpg (152.71 KiB) Viewed 2944 times

[teo1966]

I have an Aeotec ZWA005 TriSensor+ here and would like the motion sensor to switch on my LED lamp when I enter my office and, for example, if I am away for 10 minutes, to switch it off again.
it is not possible to get this working

Screenshot 2023-10-06 at 09-57-21 Domoticz.png (34.42 KiB) Viewed 2573 times

[Treve]

I have an Aeotec ZWA005 TriSensor+ here and would like the motion sensor to switch on my LED lamp when I enter my office and, for example, if I am away for 10 minutes, to switch it off again.
it is not possible to get this working

Screenshot 2023-10-06 at 09-57-21 Domoticz.png

Is every function separate visual in Domoticz? Or just only PIR function?

Where you from?

[teo1966]

I come from the south-east of the Netherlands

Screenshot 2023-10-06 at 16-25-09 Domoticz.png (34.58 KiB) Viewed 2537 times

[Treve]

Ok, will you Try the command ‘on’ in stead of ‘motion’ if you can switch the lamp on.

I will think about it and send you a PB after your replay for the next answer.

[teo1966]

does not work

[Treve]

I send you a PB.

[waltervl]

In the event editor there you can see all the devices with the current state they have. Check the state change and see what you have to use in your Blockly statement.
https://www.domoticz.com/wiki/Events#De ... states_Tab

[Loekie63]

I made the folowing script but get an error in my logging and the script does not work:

I tried with: if day= Saturday or day=Sunday instead of the Variable but that gives the same error.

The error in my log :
Error: EventSystem: Lua script error (Blockly), Name: Rolluik voor Open weekend_3 => [string "result = 0; weekday = os.date('*t')['wday']; ..."]:1: attempt to compare string with number

[fjuppe]

Hello,

This Blockly block updates a parameter (0219) with fixed value = 100 and works OK. But I want to use an existing user variable instead of the fixed value in the URL. Is this possible in Blockly and what would I write as "val=" ???

Blockly.png (15.59 KiB) Viewed 804 times