How to add AXPERT MAX 8KW WIFI/USB/RS232 in domoticz ?

Topics (not sure which fora)
when not sure where to post, post here and mods will move it to right forum.

Moderators: leecollings, remb0

Post Reply
PIFOUBMW
Posts: 4
Joined: Thursday 06 February 2020 11:54
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

How to add AXPERT MAX 8KW WIFI/USB/RS232 in domoticz ?

Post by PIFOUBMW »

Hello from France,

I just bought and installed an AXPERT MAX 48V 8KW HYBRID INVERTER with built-in WIFI module (but defective, the seller still searching the solution, but I think the display with integrated mini-wifi card must be replaced under warranty :| )

The defective built-in wifi should work on the cloud with android APP (SmartESS, WatchPower or SolarPower ==> very similars apps)

Actually the microUSB port is working on my windows laptop with watchpower v1 14 free software.

Is is possible to have this AXPERT inverter in domoticz ? Does it exist a pluggin with the WIFI or USB connexion ?

Thanks :P
Attachments
AXPERT MAX 8KW INVERTER.jpg
AXPERT MAX 8KW INVERTER.jpg (116.62 KiB) Viewed 709 times
User avatar
waltervl
Posts: 5149
Joined: Monday 28 January 2019 18:48
Target OS: Linux
Domoticz version: 2024.7
Location: NL
Contact:

Re: How to add AXPERT MAX 8KW WIFI/USB/RS232 in domoticz ?

Post by waltervl »

Axpert seems to be similar as Voltronic so perhaps the application below can communicate with Domoticz MQTT Autodiscover Gateway. https://www.domoticz.com/wiki/MQTT#Add_ ... Gateway.22

https://github.com/ned-kelly/docker-vol ... eassistant
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
PIFOUBMW
Posts: 4
Joined: Thursday 06 February 2020 11:54
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: How to add AXPERT MAX 8KW WIFI/USB/RS232 in domoticz ?

Post by PIFOUBMW »

Thanks :P

It seems working for my AXPERT because I found : "Voltronic/Axpert/MPPSolar based inverter that you want to monitor"

But it works with home assistant and not domoticz then I don't know how to do it :cry:
User avatar
waltervl
Posts: 5149
Joined: Monday 28 January 2019 18:48
Target OS: Linux
Domoticz version: 2024.7
Location: NL
Contact:

Re: How to add AXPERT MAX 8KW WIFI/USB/RS232 in domoticz ?

Post by waltervl »

It uses mqtt for Homeassistant. Domoticz MQTT can also use MQTT homeassistant (Autodiscover). So there is a good possibility that it works. See the Domoticz wiki I linked to.
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests