How to manipulate reported values?
Moderator: leecollings
-
- Posts: 24
- Joined: Monday 04 December 2017 23:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: Danmark
- Contact:
How to manipulate reported values?
I have a Samsung SmartThings Outlet that works with my ZiGate gateway. The Outlet can monitor power usages in Watt. I have tested with a unit that I know usages 40W, but in Domoticz this is reported as 400 watt. This means that I need to divide by 10, how do I do this in Domoticz or in ZiGate?
-
- Posts: 1977
- Joined: Monday 02 April 2018 20:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: France
- Contact:
Re: How to manipulate reported values?
It might required some adjustments in the integration.
Can you send me the export.json as specified I. This page https://github.com/pipiche38/Domoticz-Z ... -device.md
Envoyé de mon iPhone en utilisant Tapatalk
Can you send me the export.json as specified I. This page https://github.com/pipiche38/Domoticz-Z ... -device.md
Envoyé de mon iPhone en utilisant Tapatalk
Zigbee for Domoticz plugin / RPI3B+ / Electrolama ZZH-P / 45 devices
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
-
- Posts: 24
- Joined: Monday 04 December 2017 23:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: Danmark
- Contact:
Re: How to manipulate reported values?
Thanks! the export.json is attached
/Kurt
/Kurt
- Attachments
-
- export.zip
- (4.31 KiB) Downloaded 38 times
-
- Posts: 1977
- Joined: Monday 02 April 2018 20:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: France
- Contact:
Re: How to manipulate reported values?
I've check the following device: "Græsrobot tænd/sluk og energiforbrug"
On the file you provided I'm getting 5.3 Watts (on the last measurement). Is that incorrect ?
Could you move to beta-4.10.108 ?
Then , I would recommend to
1/ remove the existing widgets created for this device
2/ redo the pairing
=> You should then get Power, Meter, Plug and Voltage
On the file you provided I'm getting 5.3 Watts (on the last measurement). Is that incorrect ?
Could you move to beta-4.10.108 ?
Code: Select all
git pull
git checkout beta
git pull
1/ remove the existing widgets created for this device
2/ redo the pairing
=> You should then get Power, Meter, Plug and Voltage
Zigbee for Domoticz plugin / RPI3B+ / Electrolama ZZH-P / 45 devices
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
-
- Posts: 24
- Joined: Monday 04 December 2017 23:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: Danmark
- Contact:
Re: How to manipulate reported values?
Have done as you suggest, update to the beta version and then delete the existing widget and reboot my Rasp. It seems to be working, it recharge and the power usages is a bit high, but now I also have a "," in the reading . Check again tomorrow and return.
The Zigate web is different, there is no traffic overview in the main Zigate web page, but I can find my devices under management, and the topology is also ok.
The Zigate web is different, there is no traffic overview in the main Zigate web page, but I can find my devices under management, and the topology is also ok.
-
- Posts: 1977
- Joined: Monday 02 April 2018 20:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: France
- Contact:
Re: How to manipulate reported values?
What do you mean by Zigate web is different ? can you share a screenshoot
Zigbee for Domoticz plugin / RPI3B+ / Electrolama ZZH-P / 45 devices
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
-
- Posts: 24
- Joined: Monday 04 December 2017 23:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: Danmark
- Contact:
Re: How to manipulate reported values?
Hi pipiche
Data is now as expected, super and great!
Attached is the Dashboard, no change if I hit the refresh
TKurt
Data is now as expected, super and great!
Attached is the Dashboard, no change if I hit the refresh
TKurt
- Attachments
-
- zigate dashboard.PNG (160.66 KiB) Viewed 1101 times
-
- Posts: 1977
- Joined: Monday 02 April 2018 20:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: France
- Contact:
Re: How to manipulate reported values?
Excellent, if you are happy, i'm too.
Would you mind to register your device to the Zigbee compatible Database, so we can track the Zigate compatibility ?
https://zigbee.blakadder.com/
Would you mind to register your device to the Zigbee compatible Database, so we can track the Zigate compatibility ?
https://zigbee.blakadder.com/
Zigbee for Domoticz plugin / RPI3B+ / Electrolama ZZH-P / 45 devices
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
-
- Posts: 24
- Joined: Monday 04 December 2017 23:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: Danmark
- Contact:
Re: How to manipulate reported values?
Of cause, done.
What about the dashboard? - will there be an update?
/Kurt
What about the dashboard? - will there be an update?
/Kurt
-
- Posts: 1977
- Joined: Monday 02 April 2018 20:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: France
- Contact:
Re: How to manipulate reported values?
For the dashboard, can you enable the Console mode from your browser (usally you need to press F12) and then select Console, do a Refresh and check if there is any errors ?
Could you try with an other browser ?
Could you try with an other browser ?
Zigbee for Domoticz plugin / RPI3B+ / Electrolama ZZH-P / 45 devices
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
-
- Posts: 24
- Joined: Monday 04 December 2017 23:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: Danmark
- Contact:
Re: How to manipulate reported values?
Sorry for the late answer, have tested Chrome and Edge, in Console window(tap) no errors - sorry.
-
- Posts: 24
- Joined: Monday 04 December 2017 23:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: Danmark
- Contact:
Re: How to manipulate reported values?
Will it be OK to move to stable release, version 4.9.005 - meaning that my measures will still be working?
-
- Posts: 24
- Joined: Monday 04 December 2017 23:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: Danmark
- Contact:
Re: How to manipulate reported values?
Have discovered this: the "frontpage" has no errors in "Console mode", but when i enter Settings in the menu I get this:
Hope it's useful
plus a lot more as above.
Hope it's useful
- Spoiler: show
plus a lot more as above.
-
- Posts: 1977
- Joined: Monday 02 April 2018 20:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: France
- Contact:
Re: How to manipulate reported values?
Can you try to clear the cache ?
Envoyé de mon iPhone en utilisant Tapatalk
Envoyé de mon iPhone en utilisant Tapatalk
Zigbee for Domoticz plugin / RPI3B+ / Electrolama ZZH-P / 45 devices
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
-
- Posts: 24
- Joined: Monday 04 December 2017 23:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: Danmark
- Contact:
Re: How to manipulate reported values?
Sorry no impact, if I clear the cache
/Kurt
/Kurt
-
- Posts: 57
- Joined: Thursday 14 August 2014 17:41
- Target OS: Linux
- Domoticz version: beta
- Location: France
- Contact:
Re: How to manipulate reported values?
HI,
Can u open the console when you are on the dashboard, hit Refresh buton.
Take a picture of the console tab and the network tab please.
on the network tab, you will see the data that passes between the plugin and your browser.
Check that the call to "plugin-stat" brings you data by clicking on the line and going to the preview tab.
On Chrome browser please.
Can u open the console when you are on the dashboard, hit Refresh buton.
Take a picture of the console tab and the network tab please.
on the network tab, you will see the data that passes between the plugin and your browser.
Check that the call to "plugin-stat" brings you data by clicking on the line and going to the preview tab.
On Chrome browser please.
Who is online
Users browsing this forum: No registered users and 1 guest