Hi all
At my dashticz dashboard I want to use the streamplayer. It works OK but:
When I pause the stream and I leave the tablet alone for like, a half a hour. If I pick up my tablet up again the streamplayer starts playing again. Maybe it is a feature but I want to turn it off until I start it again manually. Is that possible?
I use the following:
Domoticz 4.11423 at Synology NAS
Python Version: 3.5.1
Dashticz running at Syno too
Samsung SMT550 with fully browser plus.
Thank you
streamplayer autoplay
Moderators: leecollings, htilburgs, robgeerts
-
- Posts: 76
- Joined: Sunday 17 February 2019 15:01
- Target OS: NAS (Synology & others)
- Domoticz version: 4.10
- Contact:
streamplayer autoplay
Check my Domoticz tutorials, ESP8266 and Synology blog at https://www.twoenter.nl/blog
-
- Posts: 2287
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: streamplayer autoplay
Does playing also start at initial start of Dashticz? I guess autoplay is enabled in fully browser plus.twoenter wrote: ↑Saturday 16 May 2020 15:07 Hi all
At my dashticz dashboard I want to use the streamplayer. It works OK but:
When I pause the stream and I leave the tablet alone for like, a half a hour. If I pick up my tablet up again the streamplayer starts playing again. Maybe it is a feature but I want to turn it off until I start it again manually. Is that possible?
I use the following:
Domoticz 4.11423 at Synology NAS
Python Version: 3.5.1
Dashticz running at Syno too
Samsung SMT550 with fully browser plus.
Thank you
Probably the half hour you mention is the Dashticz refresh interval. You can change the 'dashticz_refresh' parameter in CONFIG.js
Can you disable autoplay in fully browser plus? If not I can add a block parameter.
-
- Posts: 76
- Joined: Sunday 17 February 2019 15:01
- Target OS: NAS (Synology & others)
- Domoticz version: 4.10
- Contact:
Re: streamplayer autoplay
I changed a few settings in dashticz and fully.
When I turn off the screen and turn it on again, the steam start to play. Even when I paused it before.
When I leave the screen on and dashticz goes into the 'Screensaver mode' and I tap the screen, it starts to play a stream. But this happens after a while. When I tap the screen after a couple of seconds after the screensaver mode has been activated the streamplayer stay paused.
In the right corner I see Streamplayer connecting...
When I am in kiosk mode with fully and I press the home button, it starts to play a stream.
I like to have a autostart disable function. Or please tell me what I have configured wrong.
When I do a fresh start of dashticz it does not start the stream.Does playing also start at initial start of Dashticz? I guess autoplay is enabled in fully browser plus.
When I turn off the screen and turn it on again, the steam start to play. Even when I paused it before.
When I leave the screen on and dashticz goes into the 'Screensaver mode' and I tap the screen, it starts to play a stream. But this happens after a while. When I tap the screen after a couple of seconds after the screensaver mode has been activated the streamplayer stay paused.
In the right corner I see Streamplayer connecting...
When I am in kiosk mode with fully and I press the home button, it starts to play a stream.
I like to have a autostart disable function. Or please tell me what I have configured wrong.
Check my Domoticz tutorials, ESP8266 and Synology blog at https://www.twoenter.nl/blog
-
- Posts: 2287
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: streamplayer autoplay
Can you check in Fully:
Settings -> Web Content Settings -> Autoplay audio
This should be set to false
Settings -> Web Content Settings -> Autoplay audio
This should be set to false
-
- Posts: 38
- Joined: Thursday 18 October 2018 14:04
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 4.9700
- Location: netherlands, Kuuk
- Contact:
Re: streamplayer autoplay
Did you solve this?
I'm having the same problem.
When opening fully kiosk the stream does not start.
When the motion detection starts the screen again the stream player starts playing
I Checked: Settings -> Web Content Settings -> Autoplay audio
this is disabled.
What else could be the problem?
I'm having the same problem.
When opening fully kiosk the stream does not start.
When the motion detection starts the screen again the stream player starts playing
I Checked: Settings -> Web Content Settings -> Autoplay audio
this is disabled.
What else could be the problem?
-
- Posts: 31
- Joined: Tuesday 03 November 2020 10:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: streamplayer autoplay
Advanced settings -> Resume playback when getting to foreground
Disable this option.
Disable this option.
Who is online
Users browsing this forum: No registered users and 1 guest