Another noob question (toonInfo)

Easy to use, 100% Lua-based event scripting framework.

Moderator: leecollings

Post Reply
OedzesG
Posts: 106
Joined: Monday 11 March 2019 0:14
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Contact OedzesG

Another noob question (toonInfo)

Post by OedzesG »

Hallo everyone..

working a view weeks now with dzvents and thanks to you guys its going very well..

Now its time to going next level.. :D

Today i recieved my new rooted Toon thermostat.
Every thing is working wel..
so now i can use: http://192.168.1.61/happ_thermstat?acti ... mostatInfo
this gives my the following info

Code: Select all

result: "ok",
currentTemp: "2112",
currentSetpoint: "2100",
currentInternalBoilerSetpoint: "25",
programState: "0",
activeState: "-1",
nextProgram: "-1",
nextState: "-1",
nextTime: "0",
nextSetpoint: "0",
randomConfigId: "1804289383",
errorFound: "255",
connection: "0",
burnerInfo: "0",
otCommError: "0",
currentModulationLevel: "5"
Now i want for example bring the currentModulationLevel, to a custom sensor.
i tried everything but for me nothing then error's.

I hope one of you guys can please help me with an litle example.

thnx in advance!
Top
User avatar
emme
Posts: 909
Joined: Monday 27 June 2016 11:02
Target OS: Raspberry Pi / ODroid
Domoticz version: latest
Location: Milano, Italy
Contact:
Contact emme

Re: Another noob question (toonInfo)

Post by emme »

did they came between { and } ?
because you have posted a json object, but the parethesis are missing....

you can work it out with a dzvents HTTP resquest and reply... but before continuing I would like to be sure about what you get in reply
The most dangerous phrase in any language is:
"We always done this way"
Top
User avatar
waaren
Posts: 6028
Joined: Tuesday 03 January 2017 14:18
Target OS: Linux
Domoticz version: Beta
Location: Netherlands
Contact:
Contact waaren

Re: Another noob question (toonInfo)

Post by waaren »

OedzesG wrote: ↑Saturday 28 September 2019 23:37 so now i can use: http://192.168.1.61/happ_thermstat?acti ... mostatInfo
I hope one of you guys can please help me with an litle example.
Can you execute this one first and share the output?

Code: Select all

local scriptVersion = '0.201909291100'
local scriptVar  =  'ToonInfo_' .. scriptVersion

--[[ 

this dzVents script is used to collect data from Rooted Toon 
It uses a openURL call and interprets the returned JSON. 

Before activating the script:
    please read the GETTING STARTED section of the dzVents wiki. 
    change xxx.xxx.xxx.xxx in this script to the IP of your Toon
    define a dummy hardware in domoticz if not already done 
    define virtual sensors this dummy hardware 
    and change the name in the device declarations 
]]--

return
{
    on = 
    { 
        timer = { 'every 1 minutes' },
        httpResponses = { scriptVar }, 
    },

    logging =   
    {
        level = domoticz.LOG_DEBUG,
        marker = scriptVar,
    },
    
   execute = function(dz, item)
        local toonIP =  '192.168.1.125'

        local function getToonInfo()
            local url = 'http://' .. toonIP .. '/happ_thermstat?action=getThermostatInfo'
            dz.openURL({ url = url, callback = scriptVar })
        end
        
       -- main 
        if item.isTimer or item.isDevice then
            getToonInfo()
        elseif item.ok then -- statusCode == 2xx
            dz.log(item.data,dz.LOG_DEBUG)
        else
            dz.log('Could not get (good) data from ' .. toonIP .. '\n' .. item.data ,dz.LOG_ERROR)
        end
        dz.utils.dumpTable(item)
    end
}
Debian buster, bullseye on RPI-4, Intel NUC.
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
Top
OedzesG
Posts: 106
Joined: Monday 11 March 2019 0:14
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Contact OedzesG

Re: Another noob question (toonInfo)

Post by OedzesG »

Code: Select all

2019-09-29 22:56:00.284 Status: dzVents: Info: ToonInfo_0.201909291100: ------ Start internal script: Script #2:, trigger: every 1 minutes
2019-09-29 22:56:00.284 Status: dzVents: Debug: ToonInfo_0.201909291100: OpenURL: url = http://192.168.1.61/happ_thermstat?action=getThermostatInfo
2019-09-29 22:56:00.284 Status: dzVents: Debug: ToonInfo_0.201909291100: OpenURL: method = GET
2019-09-29 22:56:00.284 Status: dzVents: Debug: ToonInfo_0.201909291100: OpenURL: post data = nil
2019-09-29 22:56:00.284 Status: dzVents: Debug: ToonInfo_0.201909291100: OpenURL: headers = nil
2019-09-29 22:56:00.284 Status: dzVents: Debug: ToonInfo_0.201909291100: OpenURL: callback = ToonInfo_0.201909291100
2019-09-29 22:56:00.284 Status: dzVents: > isGroup: false
2019-09-29 22:56:00.284 Status: dzVents: > isVariable: false
2019-09-29 22:56:00.284 Status: dzVents: > isHTTPResponse: false
2019-09-29 22:56:00.284 Status: dzVents: > isScene: false
2019-09-29 22:56:00.284 Status: dzVents: > isSecurity: false
2019-09-29 22:56:00.284 Status: dzVents: > trigger: every 1 minutes
2019-09-29 22:56:00.284 Status: dzVents: > isTimer: true
2019-09-29 22:56:00.285 Status: dzVents: > baseType: timer
2019-09-29 22:56:00.285 Status: dzVents: > isDevice: false
2019-09-29 22:56:00.285 Status: dzVents: Info: ToonInfo_0.201909291100: ------ Finished Script #2
2019-09-29 22:56:00.285 Status: EventSystem: Script event triggered: /usr/local/domoticz/dzVents/runtime/dzVents.lua
2019-09-29 22:56:00.497 Status: dzVents: Info: Handling httpResponse-events for: "ToonInfo_0.201909291100
2019-09-29 22:56:00.497 Status: dzVents: Info: ToonInfo_0.201909291100: ------ Start internal script: Script #2: HTTPResponse: "ToonInfo_0.201909291100"
2019-09-29 22:56:00.497 Status: dzVents: Debug: ToonInfo_0.201909291100: {"result":"ok", "currentTemp":"2064", "currentSetpoint":"1500", "currentInternalBoilerSetpoint":"6", "programState":"2", "activeState":"3", "nextProgram":"1", "nextState":"2", "nextTime":"1569790800","nextSetpoint":"1600","randomConfigId":"1804289383","errorFound":"255","connection":"0","burnerInfo":"0","otCommError":"0","currentModulationLevel":"0"}
2019-09-29 22:56:00.497 Status: dzVents: > isGroup: false
2019-09-29 22:56:00.497 Status: dzVents: > ok: true
2019-09-29 22:56:00.497 Status: dzVents: > isVariable: false
2019-09-29 22:56:00.497 Status: dzVents: > callback: ToonInfo_0.201909291100
2019-09-29 22:56:00.497 Status: dzVents: > isHTTPResponse: true
2019-09-29 22:56:00.497 Status: dzVents: > isScene: false
2019-09-29 22:56:00.497 Status: dzVents: > _contentType: text/javascript; charset=utf-8
2019-09-29 22:56:00.497 Status: dzVents: > trigger: ToonInfo_0.201909291100
2019-09-29 22:56:00.497 Status: dzVents: > data: {"result":"ok", "currentTemp":"2064", "currentSetpoint":"1500", "currentInternalBoilerSetpoint":"6", "programState":"2", "activeState":"3", "nextProgram":"1", "nextState":"2", "nextTime":"1569790800","nextSetpoint":"1600","randomConfigId":"1804289383","errorFound":"255","connection":"0","burnerInfo":"0","otCommError":"0","currentModulationLevel":"0"}
2019-09-29 22:56:00.497 Status: dzVents: > statusCode: 200
2019-09-29 22:56:00.497 Status: dzVents: > isSecurity: false
2019-09-29 22:56:00.497 Status: dzVents: > isDevice: false
2019-09-29 22:56:00.497 Status: dzVents: > isJSON: false
2019-09-29 22:56:00.498 Status: dzVents: > protocol: HTTP/1.1
2019-09-29 22:56:00.498 Status: dzVents: > statusText: OK
2019-09-29 22:56:00.498 Status: dzVents: > isTimer: false
2019-09-29 22:56:00.498 Status: dzVents: > baseType: httpResponse
2019-09-29 22:56:00.498 Status: dzVents: > headers:
2019-09-29 22:56:00.498 Status: dzVents: > Content-Length: 352
2019-09-29 22:56:00.498 Status: dzVents: > Date: Sun, 29 Sep 2019 20:56:00 GMT
2019-09-29 22:56:00.498 Status: dzVents: > Content-Type: text/javascript; charset=utf-8
2019-09-29 22:56:00.498 Status: dzVents: > Server: lighttpd/1.4.35
2019-09-29 22:56:00.498 Status: dzVents: Info: ToonInfo_0.201909291100: ------ Finished Script #2
2019-09-29 22:56:02.481 (Synology DS218 monitor) Light/Switch (Synology DS218 status)
2019-09-29 22:56:02.528 (Synology DS118 monitor) Light/Switch (Synology DS118 status)
2019-09-29 22:56:02.476 Status: User: Admin initiated a switch command (1/Synology DS218 status/On)
2019-09-29 22:56:02.523 Status: User: Admin initiated a switch command (9/Synology DS118 status/On)
2019-09-29 22:57:00.240 Status: dzVents: Info: ------ Start internal script: Script #1:, trigger: every minute
2019-09-29 22:57:00.294 Status: dzVents: Info: Thermostaat = 15
2019-09-29 22:57:00.294 Status: dzVents: Info: Modulatie niveau = 0
2019-09-29 22:57:00.295 Status: dzVents: Info: Huidige woonkamer temp = 20.6
2019-09-29 22:57:00.295 Status: dzVents: Info: ------ Finished Script #1
2019-09-29 22:57:00.295 Status: dzVents: Info: ToonInfo_0.201909291100: ------ Start internal script: Script #2:, trigger: every 1 minutes
2019-09-29 22:57:00.295 Status: dzVents: Debug: ToonInfo_0.201909291100: OpenURL: url = http://192.168.1.61/happ_thermstat?action=getThermostatInfo
2019-09-29 22:57:00.295 Status: dzVents: Debug: ToonInfo_0.201909291100: OpenURL: method = GET
2019-09-29 22:57:00.295 Status: dzVents: Debug: ToonInfo_0.201909291100: OpenURL: post data = nil
2019-09-29 22:57:00.295 Status: dzVents: Debug: ToonInfo_0.201909291100: OpenURL: headers = nil
2019-09-29 22:57:00.295 Status: dzVents: Debug: ToonInfo_0.201909291100: OpenURL: callback = ToonInfo_0.201909291100
2019-09-29 22:57:00.295 Status: dzVents: > baseType: timer
2019-09-29 22:57:00.295 Status: dzVents: > isTimer: true
2019-09-29 22:57:00.295 Status: dzVents: > isScene: false
2019-09-29 22:57:00.295 Status: dzVents: > isDevice: false
2019-09-29 22:57:00.295 Status: dzVents: > trigger: every 1 minutes
2019-09-29 22:57:00.295 Status: dzVents: > isSecurity: false
2019-09-29 22:57:00.295 Status: dzVents: > isGroup: false
2019-09-29 22:57:00.295 Status: dzVents: > isVariable: false
2019-09-29 22:57:00.296 Status: dzVents: > isHTTPResponse: false
2019-09-29 22:57:00.296 Status: dzVents: Info: ToonInfo_0.201909291100: ------ Finished Script #2
2019-09-29 22:57:00.296 Status: EventSystem: Script event triggered: /usr/local/domoticz/dzVents/runtime/dzVents.lua
2019-09-29 22:57:00.415 Status: dzVents: Info: Handling httpResponse-events for: "ToonInfo_0.201909291100
2019-09-29 22:57:00.415 Status: dzVents: Info: ToonInfo_0.201909291100: ------ Start internal script: Script #2: HTTPResponse: "ToonInfo_0.201909291100"
2019-09-29 22:57:00.416 Status: dzVents: Debug: ToonInfo_0.201909291100: {"result":"ok", "currentTemp":"2063", "currentSetpoint":"1500", "currentInternalBoilerSetpoint":"6", "programState":"2", "activeState":"3", "nextProgram":"1", "nextState":"2", "nextTime":"1569790800","nextSetpoint":"1600","randomConfigId":"1804289383","errorFound":"255","connection":"0","burnerInfo":"0","otCommError":"0","currentModulationLevel":"0"}
2019-09-29 22:57:00.416 Status: dzVents: > headers:
2019-09-29 22:57:00.417 Status: dzVents: > Content-Length: 352
2019-09-29 22:57:00.417 Status: dzVents: > Content-Type: text/javascript; charset=utf-8
2019-09-29 22:57:00.417 Status: dzVents: > Server: lighttpd/1.4.35
2019-09-29 22:57:00.417 Status: dzVents: > Date: Sun, 29 Sep 2019 20:57:00 GMT
2019-09-29 22:57:00.417 Status: dzVents: > isTimer: false
2019-09-29 22:57:00.417 Status: dzVents: > isScene: false
2019-09-29 22:57:00.417 Status: dzVents: > isDevice: false
2019-09-29 22:57:00.417 Status: dzVents: > trigger: ToonInfo_0.201909291100
2019-09-29 22:57:00.417 Status: dzVents: > data: {"result":"ok", "currentTemp":"2063", "currentSetpoint":"1500", "currentInternalBoilerSetpoint":"6", "programState":"2", "activeState":"3", "nextProgram":"1", "nextState":"2", "nextTime":"1569790800","nextSetpoint":"1600","randomConfigId":"1804289383","errorFound":"255","connection":"0","burnerInfo":"0","otCommError":"0","currentModulationLevel":"0"}
2019-09-29 22:57:00.417 Status: dzVents: > isGroup: false
2019-09-29 22:57:00.417 Status: dzVents: > _contentType: text/javascript; charset=utf-8
2019-09-29 22:57:00.417 Status: dzVents: > baseType: httpResponse
2019-09-29 22:57:00.417 Status: dzVents: > ok: true
2019-09-29 22:57:00.417 Status: dzVents: > isHTTPResponse: true
2019-09-29 22:57:00.417 Status: dzVents: > protocol: HTTP/1.1
2019-09-29 22:57:00.417 Status: dzVents: > statusCode: 200
2019-09-29 22:57:00.417 Status: dzVents: > isVariable: false
2019-09-29 22:57:00.417 Status: dzVents: > statusText: OK
2019-09-29 22:57:00.417 Status: dzVents: > isJSON: false
2019-09-29 22:57:00.417 Status: dzVents: > callback: ToonInfo_0.201909291100
2019-09-29 22:57:00.417 Status: dzVents: > isSecurity: false
2019-09-29 22:57:00.417 Status: dzVents: Info: ToonInfo_0.201909291100: ------ Finished Script #2
Top
OedzesG
Posts: 106
Joined: Monday 11 March 2019 0:14
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Contact OedzesG

Re: Another noob question (toonInfo)

Post by OedzesG »

But today i had some time to make some test...
I thought it would be good to check if everything is working correctly by bringing the data to the domoticz logfiles.
After a lot if reading on the internet i found a solution...

This is what i have so far..

Code: Select all

return {
	
	on = {timer = {'every minute'}},
   
	execute = function(domoticz)

	local ToonIP     						= '192.168.1.61'
	local json 							= assert(loadfile "/usr/local/domoticz/var/scripts/lua/JSON.lua")()
        	
	local handle 						= assert(io.popen(string.format('curl http://%s/happ_thermstat?action=getThermostatInfo', ToonIP)))
	local ThermostatInfo					= handle:read('*all')
									  handle:close()
	local jsonThermostatInfo 				= json:decode(ThermostatInfo)
	if jsonThermostatInfo 				== nil then
		           
	return

    end

  --Ingestelde programma
	local hudige_programma   	            = tonumber(jsonThermostatInfo.activeState)

    if          hudige_programma              == -1 then domoticz.log ('Huidige programma = Handmatig')
    elseif      hudige_programma            == 0 then domoticz.log  ('Huidige programma = Comfort')  
    elseif      hudige_programma            == 1 then domoticz.log  ('Huidige programma = Thuis')
    elseif      hudige_programma            == 2 then domoticz.log  ('Huidige programma = Slapen')
    elseif      hudige_programma            == 3 then domoticz.log  ('Huidige programma = Weg')
    elseif      hudige_programma            == 4 then domoticz.log  ('Huidige programma = Vakantie')

	end
  
  --Automatich programma
	local automatisch_programma		= tonumber(jsonThermostatInfo.programState) 

	if          automatisch_programma       == 0 then domoticz.log  ('Toon programma = Handmatig')
	elseif      automatisch_programma     == 1 then domoticz.log  ('Toon programma = Automatisch') 
	elseif      automatisch_programma     == 2 then domoticz.log  ('Toon programma = Automatisch met tijdelijk afwijkend programma')
   	elseif      automatisch_programma     == 8 then domoticz.log  ('Toon programma = Automatisch met continu afwijkend programma')

	end 
  
  --Huidige thermostaat waarde 
	local waarde_thermostaat				= tonumber(jsonThermostatInfo.currentSetpoint) / 100
	domoticz.log('Thermostaat	 		= ' .. tostring(waarde_thermostaat), domoticz.LOG_INFO)

  --Modulatie niveau
	local modulatie_niveau       			= tonumber(jsonThermostatInfo.currentModulationLevel)
	domoticz.log('Modulatie niveau 			= ' .. tostring(modulatie_niveau), domoticz.LOG_INFO)
			
  --Temperatuur woonkamer
	local woonkamer_temperatuur			= domoticz.utils.round(tonumber(jsonThermostatInfo.currentTemp) / 100,1)
	domoticz.log('Huidige woonkamer temp 	= ' .. tostring(woonkamer_temperatuur), domoticz.LOG_INFO)
		
    end 
}

Code: Select all

2019-09-29 23:53:00.203 Status: dzVents: Info: ------ Start internal script: Script #1:, trigger: every minute
2019-09-29 23:53:00.254 Status: dzVents: Info: Huidige programma = Slapen
2019-09-29 23:53:00.254 Status: dzVents: Info: Toon programma = Automatisch
2019-09-29 23:53:00.254 Status: dzVents: Info: Thermostaat = 16
2019-09-29 23:53:00.255 Status: dzVents: Info: Modulatie niveau = 0
2019-09-29 23:53:00.255 Status: dzVents: Info: Huidige woonkamer temp = 20.3
2019-09-29 23:53:00.255 Status: dzVents: Info: ------ Finished Script #1
Top
User avatar
waaren
Posts: 6028
Joined: Tuesday 03 January 2017 14:18
Target OS: Linux
Domoticz version: Beta
Location: Netherlands
Contact:
Contact waaren

Re: Another noob question (toonInfo)

Post by waaren »

OedzesG wrote: ↑Sunday 29 September 2019 23:54 But today i had some time to make some test...
After a lot if reading on the internet i found a solution...
Good start !

Have a look at the attached where the curl command is replaced by the async openURL command. This will prevent the domoticz event system to come to a stand still when the Toon does not react timely.

Code: Select all

local scriptVersion = '0.201909300100'
local scriptVar  =  'ToonInfo_' .. scriptVersion

--[[ 

this dzVents script is used to collect data from Rooted Toon 
It uses a openURL call and interprets the returned JSON. 

Before activating the script:
    please read the GETTING STARTED section of the dzVents wiki. 
    change xxx.xxx.xxx.xxx in this script to the IP of your Toon
    define a dummy hardware in domoticz if not already done 
    define virtual sensors this dummy hardware 
    and change the name in the device declarations 
]]--

return
{
    on = 
    { 
        timer = { 'every 1 minutes' },
        httpResponses = { scriptVar }, 
    },

    logging =   
    {
        level = domoticz.LOG_DEBUG,
        marker = scriptVar,
    },
    
   execute = function(dz, item)
        local toonIP =  '192.168.1.61'

        local function getToonInfo()
            local url = 'http://' .. toonIP .. '/happ_thermstat?action=getThermostatInfo'
            dz.openURL({ url = url, callback = scriptVar })
        end
        
        local function processResult(jsonThermostatInfo)
            local domoticz = dz -- I always use dz to abbreviate domoticz 
            --Ingestelde programma
            local hudige_programma   	            = tonumber(jsonThermostatInfo.activeState)

            if          hudige_programma            == -1 then domoticz.log ('Huidige programma = Handmatig')
            elseif      hudige_programma            == 0 then domoticz.log  ('Huidige programma = Comfort')  
            elseif      hudige_programma            == 1 then domoticz.log  ('Huidige programma = Thuis')
            elseif      hudige_programma            == 2 then domoticz.log  ('Huidige programma = Slapen')
            elseif      hudige_programma            == 3 then domoticz.log  ('Huidige programma = Weg')
            elseif      hudige_programma            == 4 then domoticz.log  ('Huidige programma = Vakantie')

            end
          
          --Automatich programma
            local automatisch_programma		= tonumber(jsonThermostatInfo.programState) 

            if          automatisch_programma       == 0 then domoticz.log  ('Toon programma = Handmatig')
            elseif      automatisch_programma     == 1 then domoticz.log  ('Toon programma = Automatisch') 
            elseif      automatisch_programma     == 2 then domoticz.log  ('Toon programma = Automatisch met tijdelijk afwijkend programma')
            elseif      automatisch_programma     == 8 then domoticz.log  ('Toon programma = Automatisch met continu afwijkend programma')

            end 
          
          --Huidige thermostaat waarde 
            local waarde_thermostaat				= tonumber(jsonThermostatInfo.currentSetpoint) / 100
            domoticz.log('Thermostaat	 		= ' .. tostring(waarde_thermostaat), domoticz.LOG_INFO)

          --Modulatie niveau
            local modulatie_niveau       			= tonumber(jsonThermostatInfo.currentModulationLevel)
            domoticz.log('Modulatie niveau 			= ' .. tostring(modulatie_niveau), domoticz.LOG_INFO)
                    
          --Temperatuur woonkamer
            local woonkamer_temperatuur			= domoticz.utils.round(tonumber(jsonThermostatInfo.currentTemp) / 100,1)
            domoticz.log('Huidige woonkamer temp 	= ' .. tostring(woonkamer_temperatuur), domoticz.LOG_INFO)
        end 
       
       -- main 
        if item.isTimer or item.isDevice then
            getToonInfo()
        elseif item.ok then -- statusCode == 2xx
           local toonInfo = dz.utils.fromJSON(item.data )
           processResult(toonInfo)
        else
            dz.log('Could not get (good) data from ' .. toonIP .. '\n' .. item.data ,dz.LOG_ERROR)
        end
    end
}
Debian buster, bullseye on RPI-4, Intel NUC.
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
Top
User avatar
EdwinK
Posts: 1820
Joined: Sunday 22 January 2017 21:46
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Rhoon
Contact:
Contact EdwinK

Re: Another noob question (toonInfo)

Post by EdwinK »

Thanks. So far this seems to work for me, onwards to the next step, controlling the toon :), and adding sensors/switches
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | Hue | Tuya | IKEA tradfri | Dashticz V3 on Lenovo Huawei Tablet | Conbee
Top
OedzesG
Posts: 106
Joined: Monday 11 March 2019 0:14
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Contact OedzesG

Re: Another noob question (toonInfo)

Post by OedzesG »

Thnx Waaren!! youre knowledge is amazing!
by EdwinK » Monday 30 September 2019 9:30

Thanks. So far this seems to work for me, onwards to the next step, controlling the toon :), and adding sensors/switches
Good to hear EdwinK... My idea is to let this script run trough Domoticz API, so youre free to call the devices whatever you want..
This morning i make a test to update my selector switch when Toon is changed.

So far.. so good..

Code: Select all

return {
	
	on = {timer = {'every minute'}},
   
	execute = function(domoticz)

	local ToonIP     						= '192.168.1.61'
	local DomoticzIpPoort					= '192.168.1.24:8085'
	local IDX_ToonProgramma					= '48'
	local IDX_ToonProgrammaVerloop			= ''
	
	
	local json 								= assert(loadfile "/usr/local/domoticz/var/scripts/lua/JSON.lua")()
	        	
	local handle 							= assert(io.popen(string.format('curl http://%s/happ_thermstat?action=getThermostatInfo', ToonIP)))
	local ThermostatInfo					= handle:read('*all')
											  handle:close()
	local jsonThermostatInfo 				= json:decode(ThermostatInfo)
	if jsonThermostatInfo 					== nil then
		           
	return

    end

	-- ACTIEVE PROGRAMMA -- 

	local actieve_programma   	            = tonumber(jsonThermostatInfo.activeState)

    if          actieve_programma            == -1 then domoticz.log ('Actieve programma = Handmatig')
    elseif      actieve_programma            == 0  then domoticz.log  ('Actieve programma = Comfort')  
    elseif      actieve_programma            == 1  then domoticz.log  ('Actieve programma = Thuis')
    elseif      actieve_programma            == 2  then domoticz.log  ('Actieve programma = Slapen')
    elseif      actieve_programma            == 3  then domoticz.log  ('Actieve programma = Weg')
    elseif      actieve_programma            == 4  then domoticz.log  ('Actieve programma = Vakantie')

	end
	
	if          actieve_programma            == -1 then actieve_programma		= 0
    elseif      actieve_programma            == 0  then actieve_programma 		= 10 
    elseif      actieve_programma            == 1  then actieve_programma 		= 20		
    elseif      actieve_programma            == 2  then actieve_programma 		= 30
    elseif      actieve_programma            == 3  then actieve_programma 		= 40
    elseif      actieve_programma            == 4  then actieve_programma 		= 50
	
	end
	
	domoticz.openURL({
	url = 'http://'.. 
	DomoticzIpPoort .. 
	'/json.htm?type=command&param=switchlight&idx=' .. 
	IDX_ToonProgramma .. 
	'&switchcmd=Set%20Level&level=' ..
	tostring(actieve_programma),
	method = 'GET',
	})

    -- PROGRAMMA VERLOOP -- 

  	local programma_verloop					= tonumber(jsonThermostatInfo.programState) 

	if          programma_verloop	       == 0 then domoticz.log  ('Toon programma verloop = Handmatig')
	elseif      programma_verloop	       == 1 then domoticz.log  ('Toon programma verloop = Automatisch') 
	elseif      programma_verloop	       == 2 then domoticz.log  ('Toon programma verloop = Automatisch met tijdelijk afwijkend programma')
   	elseif      programma_verloop	       == 8 then domoticz.log  ('Toon programma verloop = Automatisch met continu afwijkend programma')

	end 
  
  --Huidige thermostaat waarde 
	local waarde_thermostaat				= tonumber(jsonThermostatInfo.currentSetpoint) / 100
	domoticz.log('Thermostaat	 			= ' .. tostring(waarde_thermostaat), domoticz.LOG_INFO)

  --Modulatie niveau
	local modulatie_niveau       			= tonumber(jsonThermostatInfo.currentModulationLevel)
	domoticz.log('Modulatie niveau 			= ' .. tostring(modulatie_niveau), domoticz.LOG_INFO)
			
  --Temperatuur woonkamer
	local woonkamer_temperatuur				= domoticz.utils.round(tonumber(jsonThermostatInfo.currentTemp) / 100,1)
	domoticz.log('Huidige woonkamer temp 	= ' .. tostring(woonkamer_temperatuur), domoticz.LOG_INFO)
		
    end 
}
Top
OedzesG
Posts: 106
Joined: Monday 11 March 2019 0:14
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Contact OedzesG

Re: Another noob question (toonInfo)

Post by OedzesG »

I think i almoast finisching my script: ToonToDomoticz.

What do you think about it?
toon_domoticz_image.JPG
toon_domoticz_image.JPG (98.35 KiB) Viewed 1287 times

Code: Select all


	local scriptVersion = '0.201909300100'
	local scriptVar  =  'ToonInfo_' .. scriptVersion

	--[[ 
	dit dzVents-script wordt gebruikt om gegevens van Rooted Toon te verzamelen
	Het gebruikt een openURL-aanroep en interpreteert de geretourneerde JSON.

	Voordat u het script activeert:
    lees het gedeelte AAN DE SLAG van de dzVents-wiki.
    wijzig xxx.xxx.xxx.xxx in dit script in het IP-adres van uw Toon
    definieer een dummy hardware in domoticz als dit nog niet is gebeurd
    definieer virtuele sensoren deze dummy hardware
    en wijzig de naam in de apparaatverklaringen
	]]--

	return
		{
		on = 
		{	timer = { 'every 1 minutes' },httpResponses = { scriptVar }, 
			},
			logging =   
			{
			level 		= domoticz.LOG_DEBUG,
			marker 		= scriptVar,
			},
    
			execute = function(dz, item)
			
			-- INSTELLINGEN NAAR EIGEN SITUATIE --
        
			local toonIP 						= '192.168.1.61'			-- Toon thermostaat IP adres
			local DomoticzIpPoort				= '192.168.1.24:8085'		-- Domoticz IP adres + poort 
			local IDX_ToonThermostaatProgramma	= '48'					-- IDX nummer Toon thermostaat programma keuze-schakelaar
			local IDX_ToonAutoProgramma			= '49'					-- IDX nummer Toon auto programma keuze-schakelaar
			local IDX_ToonThermostaat			= '50' 				-- IDX nummer toon thermostaat 
			local IDX_KamerTemperatuur			= '51'					-- IDX nummer kamer tamperatuur
			local IDX_ModulatieNiveau				= '52'					-- IDX nummer modulatie niveau custom sensor
			local IDX_ToonActiviteit				= '53'					-- IDX nummer Toon activiteit keuze-schakelaar

			
			-- HIERONDER NIETS MEER VERANDEREN !! -- 
			
			local function getToonInfo()
			
           		local url 								= 'http://' .. toonIP .. '/happ_thermstat?action=getThermostatInfo'
            		dz.openURL								({ url = url, callback = scriptVar })
			end
        
			local function processResult(jsonThermostatInfo)
            
			local domoticz 							= dz 
			
			-- TOON THERMOSTAAT PROGRAMMA -- 
			
			local thermostaat_programma   	  = tonumber(jsonThermostatInfo.activeState)

			if            thermostaat_programma       == -1 then domoticz.log  ('Programma Toon thermostaat 	= Handmatig')
			elseif      thermostaat_programma       == 0  then domoticz.log  ('Programma Toon thermostaat 	= Comfort')  
			elseif      thermostaat_programma       == 1  then domoticz.log  ('Programma Toon thermostaat 	= Thuis')
			elseif      thermostaat_programma       == 2  then domoticz.log  ('Programma Toon thermostaat 	= Slapen')
			elseif      thermostaat_programma       == 3  then domoticz.log  ('Programma Toon thermostaat 	= Weg')
			elseif      thermostaat_programma       == 4  then domoticz.log  ('Programma Toon thermostaat 	= Vakantie')

			end
	
			if            thermostaat_programma       == -1 then thermostaat_programma			= 0
			elseif      thermostaat_programma       == 0  then thermostaat_programma 		= 10 
			elseif      thermostaat_programma       == 1  then thermostaat_programma 		= 20		
			elseif      thermostaat_programma       == 2  then thermostaat_programma 		= 30
			elseif      thermostaat_programma       == 3  then thermostaat_programma 		= 40
			elseif      thermostaat_programma       == 4  then thermostaat_programma 		= 50
	
			end
	
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=switchlight&idx=' .. 
			IDX_ToonThermostaatProgramma .. 
			'&switchcmd=Set%20Level&level=' ..
			tostring(thermostaat_programma),
			method = 'GET',
			})

			-- TOON AUTO PROGRAMMA -- 
			
			local auto_programma			= tonumber(jsonThermostatInfo.programState) 
	
			if          auto_programma		== 0 then domoticz.log  ('Toon automatisch programma = Uit')
			elseif      auto_programma		== 1 then domoticz.log  ('Toon automatisch programma = Aan') 
			elseif      auto_programma		== 2 then domoticz.log  ('Toon automatisch programma = Aan met tijdelijk afwijkend programma')
			elseif      auto_programma	       	== 8 then domoticz.log  ('Toon automatisch programma = Aan met continu afwijkend programma')

			end 
			
			if          auto_programma	       		== 0 then auto_programma 	= 0
			elseif      auto_programma	       		== 1 then auto_programma 	= 10
			elseif      auto_programma	       		== 2 then auto_programma 	= 20
			elseif      auto_programma	      		== 8 then auto_programma 	= 30
			
			end
			
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=switchlight&idx=' .. 
			IDX_ToonAutoProgramma .. 
			'&switchcmd=Set%20Level&level=' ..
			tostring(auto_programma),
			method = 'GET',
			})
			
			
			-- TOON THERMOSTAAT --
  
		  	local waarde_thermostaat					= tonumber(jsonThermostatInfo.currentSetpoint) / 100
			domoticz.log('Thermostaat	 			= ' .. tostring(waarde_thermostaat), domoticz.LOG_INFO)
			
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=setsetpoint&idx=' .. 
			IDX_ToonThermostaat .. 
			'&setpoint=' ..
			tostring(waarde_thermostaat),
			method = 'GET',
			})
		
		
			-- HUIDIGE KAMER TEMPERATUUR -- 
			
			local kamer_temperatuur					= domoticz.utils.round(tonumber(jsonThermostatInfo.currentTemp) / 100,1)
			domoticz.log('Huidige woonkamer temp. 		= ' .. tostring(kamer_temperatuur), domoticz.LOG_INFO)	
			
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=udevice&idx=' .. 
			IDX_KamerTemperatuur .. 
			'&nvalue=0&svalue=' ..
			tostring(kamer_temperatuur),
			method = 'GET',
			})
			
								
		    -- MODULATIE NIVEAU -- 
			
			local modulatie_niveau       			= tonumber(jsonThermostatInfo.currentModulationLevel)
			domoticz.log('Modulatie niveau 			= ' .. tostring(modulatie_niveau), domoticz.LOG_INFO)
			
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=udevice&idx=' .. 
			IDX_ModulatieNiveau .. 
			'&nvalue=0&svalue=' ..
			tostring(modulatie_niveau),
			method = 'GET',
			})
			
			-- TOON ACTIVITEIT -- 
			
			local toon_activiteit = tonumber(jsonThermostatInfo.burnerInfo)
			
			if          toon_activiteit       		== 0 then domoticz.log   ('Momenteel geen activiteit')
			elseif      toon_activiteit       		== 1  then domoticz.log  ('Verwarmen CV')  
			elseif      toon_activiteit      		== 2  then domoticz.log  ('Verwarmen water')
			
			end 
			
			if          toon_activiteit	      		== 0 then toon_activiteit 	= 0
			elseif      toon_activiteit	       		== 1 then toon_activiteit 	= 10
			elseif      toon_activiteit	       		== 2 then toon_activiteit	= 20
			
			end 
			
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=switchlight&idx=' .. 
			IDX_ToonActiviteit .. 
			'&switchcmd=Set%20Level&level=' ..
			tostring(toon_activiteit),
			method = 'GET',
			})
			
    end 
            
       
       -- main 
			if item.isTimer or item.isDevice then
			getToonInfo()
			elseif item.ok then -- statusCode == 2xx
			local toonInfo = dz.utils.fromJSON(item.data )
			processResult(toonInfo)
			else
            dz.log('Could not get (good) data from ' .. toonIP .. '\n' .. item.data ,dz.LOG_ERROR)
        end
    end
}
Top
OedzesG
Posts: 106
Joined: Monday 11 March 2019 0:14
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Contact OedzesG

Re: Another noob question (toonInfo)

Post by OedzesG »

I think i needed some help guys!

I made another small script to set my setpoint:

Code: Select all

	return {
	on = {
    devices = {'Toon thermostaat'}
	},
   
	execute = function(domoticz, device)
	   
    local ToonIp 			    = '192.168.1.61' 
	local ThermostaatWaarde		= device.setPoint*100
	
	domoticz.log('Ingestelde temperatuur. 	= ' .. tostring(ThermostaatWaarde/100), domoticz.LOG_INFO)

	
	domoticz.openURL({
	url = 'http://'.. 
	ToonIp .. 
	'/happ_thermstat?action=setSetpoint&Setpoint=' .. 
	tostring(ThermostaatWaarde),
	method = 'GET',
	})  

	end 
}
The problem is that when my script: ToonToDomoticz is running (every minute) this script also is triggered.. so the url is send en then Toon api is thinking that the temperature is manualy changed and set the program to Manualy.

So how do i prefent that this script is triggered trough my other script?

Thnx! (hope you understand my broblem! :oops: )
Top
OedzesG
Posts: 106
Joined: Monday 11 March 2019 0:14
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Contact OedzesG

Re: Another noob question (toonInfo)

Post by OedzesG »

This is my fully ToonToDomoticz script...

Code: Select all

	local scriptVersion = '0.201909300100'
		local scriptVar  =  'ToonInfo_' .. scriptVersion

	--[[ 
	dit dzVents-script wordt gebruikt om gegevens van Rooted Toon te verzamelen
	Het gebruikt een openURL-aanroep en interpreteert de geretourneerde JSON.

	Voordat u het script activeert:
   	lees het gedeelte AAN DE SLAG van de dzVents-wiki.
   	wijzig: INSTELLINGEN NAAR EIGEN SITUATIE in dit script, overeenkomstig met uw
    	eigen Domoticz installatie.
    	definieer een dummy hardware in domoticz als dit nog niet is gebeurd en registreer 
    	hun unieke IDX nummers. 
	]]--

	return
		{on = 
		    
		{	timer           	= { 'every 1 minutes' },
		   	httpResponses   = { scriptVar }, 
		},
			
			logging =   
		{	level 		= domoticz.LOG_DEBUG,
			marker 		= scriptVar,
		},
    
			execute = function(dz, item)
			
			-- INSTELLINGEN NAAR EIGEN SITUATIE --
        
			local toonIP 					= '192.168.1.61'			-- Toon thermostaat IP adres
			local DomoticzIpPoort			= '192.168.1.24:8085'		-- Domoticz IP adres + poort 
			local IDX_ToonScene             		= '48'					-- IDX nummer Toon thermostaat scene keuze-schakelaar
			local IDX_ToonAutoProgramma		= '49'					-- IDX nummer Toon auto programma keuze-schakelaar
			local IDX_ToonThermostaat		= '50' 				-- IDX nummer toon thermostaat 
			local IDX_ToonKamerTemperatuur	= '51'					-- IDX nummer kamer tamperatuur
			local IDX_ToonModulatieNiveau		= '52'					-- IDX nummer modulatie niveau custom sensor
			local IDX_ToonActiviteit			= '53'					-- IDX nummer Toon activiteit keuze-schakelaar

			
			-- HIERONDER NIETS MEER VERANDEREN !! -- 
			
			local function getToonInfo()
			
            		local url 								= 'http://' .. toonIP .. '/happ_thermstat?action=getThermostatInfo'
            		dz.openURL								({ url = url, callback = scriptVar })
			end
        
			local function processResult(jsonThermostatInfo)
            
			local domoticz 							= dz 
			
			-- TOON SCENE -- 
			
			local toon_scene   	                   = tonumber(jsonThermostatInfo.activeState)

			if          toon_scene                    == -1 then domoticz.log  ('Programma Toon thermostaat 	= Handmatig')
			elseif      toon_scene                  == 0  then domoticz.log  ('Programma Toon thermostaat 	= Comfort')  
			elseif      toon_scene                  == 1  then domoticz.log  ('Programma Toon thermostaat 	= Thuis')
			elseif      toon_scene                  == 2  then domoticz.log  ('Programma Toon thermostaat 	= Slapen')
			elseif      toon_scene                  == 3  then domoticz.log  ('Programma Toon thermostaat 	= Weg')
			elseif      toon_scene                  == 4  then domoticz.log  ('Programma Toon thermostaat 	= Vakantie')

			end
	
			if          toon_scene                  == -1 then toon_scene		= 0
			elseif      toon_scene                  == 0  then toon_scene 		= 10 
			elseif      toon_scene                  == 1  then toon_scene 		= 20		
			elseif      toon_scene                  == 2  then toon_scene 		= 30
			elseif      toon_scene                  == 3  then toon_scene 		= 40
			elseif      toon_scene                  == 4  then toon_scene 		= 50
	
			end
	
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=switchlight&idx=' .. 
			IDX_ToonScene .. 
			'&switchcmd=Set%20Level&level=' ..
			tostring(toon_scene),
			method = 'GET',
			})

			-- TOON AUTO PROGRAMMA -- 
			
			local auto_programma					= tonumber(jsonThermostatInfo.programState) 
	
			if          auto_programma		  == 0 then domoticz.log  ('Toon automatisch programma = Uit')
			elseif      auto_programma		  == 1 then domoticz.log  ('Toon automatisch programma = Aan') 
			elseif      auto_programma		  == 2 then domoticz.log  ('Toon automatisch programma = Aan met tijdelijk afwijkend programma')
			elseif      auto_programma	       	 == 8 then domoticz.log  ('Toon automatisch programma = Aan met continu afwijkend programma')

			end 
			
			if          auto_programma	       		== 0 then auto_programma 	= 0
			elseif      auto_programma	       		== 1 then auto_programma 	= 10
			elseif      auto_programma	       		== 2 then auto_programma 	= 20
			elseif      auto_programma	      		== 8 then auto_programma 	= 30
			
			end
			
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=switchlight&idx=' .. 
			IDX_ToonAutoProgramma .. 
			'&switchcmd=Set%20Level&level=' ..
			tostring(auto_programma),
			method = 'GET',
			})
			
			-- TOON THERMOSTAAT --
  
		  	local waarde_thermostaat				= tonumber(jsonThermostatInfo.currentSetpoint) / 100
			domoticz.log('Thermostaat	 			= ' .. tostring(waarde_thermostaat), domoticz.LOG_INFO)
			
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=setsetpoint&idx=' .. 
			IDX_ToonThermostaat .. 
			'&setpoint=' ..
			tostring(waarde_thermostaat),
			method = 'GET',
			})
		    
			-- HUIDIGE KAMER TEMPERATUUR -- 
			
			local kamer_temperatuur					= domoticz.utils.round(tonumber(jsonThermostatInfo.currentTemp) / 100,1)
			domoticz.log('Huidige woonkamer temp. 	= ' .. tostring(kamer_temperatuur), domoticz.LOG_INFO)	
			
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=udevice&idx=' .. 
			IDX_ToonKamerTemperatuur .. 
			'&nvalue=0&svalue=' ..
			tostring(kamer_temperatuur),
			method = 'GET',
			})
			
		    -- MODULATIE NIVEAU -- 
			
			local modulatie_niveau       			= tonumber(jsonThermostatInfo.currentModulationLevel)
			domoticz.log('Modulatie niveau 			= ' .. tostring(modulatie_niveau), domoticz.LOG_INFO)
			
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=udevice&idx=' .. 
			IDX_ToonModulatieNiveau .. 
			'&nvalue=0&svalue=' ..
			tostring(modulatie_niveau),
			method = 'GET',
			})
			
			-- TOON ACTIVITEIT -- 
			
			local toon_activiteit = tonumber(jsonThermostatInfo.burnerInfo)
			
			if          toon_activiteit       		== 0 then domoticz.log   ('Momenteel geen activiteit')
			elseif      toon_activiteit       		== 1  then domoticz.log  ('Verwarmen CV')  
			elseif      toon_activiteit      		== 2  then domoticz.log  ('Verwarmen water')
			
			end 
			
			if          toon_activiteit	      		== 0 then toon_activiteit 	= 0
			elseif      toon_activiteit	       		== 1 then toon_activiteit 	= 10
			elseif      toon_activiteit	       		== 2 then toon_activiteit	= 20
			
			end 
			
			domoticz.openURL({
			url = 'http://'.. 
			DomoticzIpPoort .. 
			'/json.htm?type=command&param=switchlight&idx=' .. 
			IDX_ToonActiviteit .. 
			'&switchcmd=Set%20Level&level=' ..
			tostring(toon_activiteit),
			method = 'GET',
			})
			
            end
        
            -- main 
			if item.isTimer or item.isDevice then
			getToonInfo()
			elseif item.ok then -- statusCode == 2xx
			local toonInfo = dz.utils.fromJSON(item.data )
			processResult(toonInfo)
			else
            dz.log('Could not get (good) data from ' .. toonIP .. '\n' .. item.data ,dz.LOG_ERROR)
        end
    end
Top
User avatar
waaren
Posts: 6028
Joined: Tuesday 03 January 2017 14:18
Target OS: Linux
Domoticz version: Beta
Location: Netherlands
Contact:
Contact waaren

Re: Another noob question (toonInfo)

Post by waaren »

OedzesG wrote: ↑Monday 30 September 2019 12:39 I think i almost finished my script: ToonToDomoticz.
I am not sure I quite understand why you use the domoticz.openURL call for setting the switches in domoticz.
Is there a reason why you don't' use

Code: Select all

domoticz.devices(IDX_ToonThermostaatProgramma).setLevel(thermostaat_programma)
and similar commands in the other places where you now use domoticz openURL ?
Debian buster, bullseye on RPI-4, Intel NUC.
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
Top
OedzesG
Posts: 106
Joined: Monday 11 March 2019 0:14
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Contact OedzesG

Re: Another noob question (toonInfo)

Post by OedzesG »

No special reason for URL, just becouse i know how to handle.

For now i changed everything.. but the same problem.
Domoticz triggers the ToonThermostaat script when updating the setpoint and after that when te temerature is changed by selecting a scene, Toon API is thinking that the temerature is changed manualy by setpoint.. en then changing the scene to manual..

ToonToDomoticz:
Spoiler: show
local scriptVersion = '0.201909300100'
local scriptVar = 'ToonInfo_' .. scriptVersion

return
{
on = {
timer = { 'every 1 minutes' },
httpResponses = { scriptVar }},

logging =
{level = domoticz.LOG_DEBUG,
marker = scriptVar,},

execute = function(dz, item, devices)

-- INSTELLINGEN NAAR EIGEN SITUATIE --

local toonIP = '192.168.1.61' -- Toon thermostaat IP adres
local IDX_ToonScene = 48 -- IDX nummer Toon thermostaat scene keuze-schakelaar
local IDX_ToonAutoProgramma = 49 -- IDX nummer Toon auto programma keuze-schakelaar
local IDX_ToonThermostaat = 50 -- IDX nummer toon thermostaat
local IDX_ToonKamerTemperatuur = 51 -- IDX nummer kamer tamperatuur
local IDX_ToonModulatieNiveau = 52 -- IDX nummer modulatie niveau custom sensor
local IDX_ToonActiviteit = 53 -- IDX nummer Toon activiteit keuze-schakelaar

-- HIERONDER NIETS MEER VERANDEREN !! --

local function getToonInfo()

local url = 'http://' .. toonIP .. '/happ_thermstat?action=getThermostatInfo'
dz.openURL ({ url = url, callback = scriptVar })
end
local function processResult(jsonThermostatInfo)

local domoticz = dz

-- TOON SCENE --
local toon_scene = tonumber(jsonThermostatInfo.activeState)

if toon_scene == -1 then domoticz.log ('Programma Toon thermostaat = Handmatig')
elseif toon_scene == 0 then domoticz.log ('Programma Toon thermostaat = Comfort')
elseif toon_scene == 1 then domoticz.log ('Programma Toon thermostaat = Thuis')
elseif toon_scene == 2 then domoticz.log ('Programma Toon thermostaat = Slapen')
elseif toon_scene == 3 then domoticz.log ('Programma Toon thermostaat = Weg')
elseif toon_scene == 4 then domoticz.log ('Programma Toon thermostaat = Vakantie')
end
if toon_scene == -1 then toon_scene = 0
elseif toon_scene == 0 then toon_scene = 10
elseif toon_scene == 1 then toon_scene = 20
elseif toon_scene == 2 then toon_scene = 30
elseif toon_scene == 3 then toon_scene = 40
elseif toon_scene == 4 then toon_scene = 50
end
domoticz.devices(IDX_ToonScene).switchSelector(toon_scene)

-- TOON AUTO PROGRAMMA --
local auto_programma = tonumber(jsonThermostatInfo.programState)

if auto_programma == 0 then domoticz.log ('Toon automatisch programma = Uit')
elseif auto_programma == 1 then domoticz.log ('Toon automatisch programma = Aan')
elseif auto_programma == 2 then domoticz.log ('Toon automatisch programma = Aan met tijdelijk afwijkend programma')
elseif auto_programma == 8 then domoticz.log ('Toon automatisch programma = Aan met continu afwijkend programma')
end
if auto_programma == 0 then auto_programma = 0
elseif auto_programma == 1 then auto_programma = 10
elseif auto_programma == 2 then auto_programma = 20
elseif auto_programma == 8 then auto_programma = 30
end
domoticz.devices(IDX_ToonAutoProgramma).switchSelector(auto_programma)

-- TOON THERMOSTAAT --
local waarde_thermostaat = tonumber(jsonThermostatInfo.currentSetpoint) / 100
domoticz.log('Thermostaat = ' .. tostring(waarde_thermostaat), domoticz.LOG_INFO)
domoticz.devices(IDX_ToonThermostaat).updateSetPoint(waarde_thermostaat)

-- HUIDIGE KAMER TEMPERATUUR --
local kamer_temperatuur = domoticz.utils.round(tonumber(jsonThermostatInfo.currentTemp) / 100,1)
domoticz.log('Huidige woonkamer temp. = ' .. tostring(kamer_temperatuur), domoticz.LOG_INFO)
domoticz.devices(IDX_ToonKamerTemperatuur).updateTemperature(kamer_temperatuur)

-- MODULATIE NIVEAU --
local modulatie_niveau = tonumber(jsonThermostatInfo.currentModulationLevel)
domoticz.log('Modulatie niveau = ' .. tostring(modulatie_niveau), domoticz.LOG_INFO)
domoticz.devices(IDX_ToonModulatieNiveau).updateCustomSensor(modulatie_niveau)

-- TOON ACTIVITEIT --
local toon_activiteit = tonumber(jsonThermostatInfo.burnerInfo)

if toon_activiteit == 0 then domoticz.log ('Momenteel geen activiteit')
elseif toon_activiteit == 1 then domoticz.log ('Verwarmen CV')
elseif toon_activiteit == 2 then domoticz.log ('Verwarmen water')
end
if toon_activiteit == 0 then toon_activiteit = 0
elseif toon_activiteit == 1 then toon_activiteit = 10
elseif toon_activiteit == 2 then toon_activiteit = 20
end
domoticz.devices(IDX_ToonActiviteit).switchSelector(toon_activiteit)
end
-- main
if item.isTimer or item.isDevice then
getToonInfo()
elseif item.ok then -- statusCode == 2xx
local toonInfo = dz.utils.fromJSON(item.data )
processResult(toonInfo)
else
dz.log('Could not get (good) data from ' .. toonIP .. '\n' .. item.data ,dz.LOG_ERROR)
end
end
}
ToonThermostaat
Spoiler: show
return {
on = {
devices = {'Toon thermostaat'}
},

execute = function(domoticz, device)

local ToonIp = '192.168.1.61'
local ThermostaatWaarde = device.setPoint*100

domoticz.log('Ingestelde temperatuur. = ' .. tostring(ThermostaatWaarde/100), domoticz.LOG_INFO)


domoticz.openURL({
url = 'http://'..
ToonIp ..
'/happ_thermstat?action=setSetpoint&Setpoint=' ..
tostring(ThermostaatWaarde),
method = 'GET',
})

end
}
Top
OedzesG
Posts: 106
Joined: Monday 11 March 2019 0:14
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Contact OedzesG

Re: Another noob question (toonInfo)

Post by OedzesG »

Code: Select all

domoticz.devices(IDX_ToonThermostaat).updateSetPoint(waarde_thermostaat).silent()
Is not working on setpoints... :roll: is ther another way?
Top
User avatar
waaren
Posts: 6028
Joined: Tuesday 03 January 2017 14:18
Target OS: Linux
Domoticz version: Beta
Location: Netherlands
Contact:
Contact waaren

Re: Another noob question (toonInfo)

Post by waaren »

OedzesG wrote: ↑Monday 30 September 2019 19:58

Code: Select all

domoticz.devices(IDX_ToonThermostaat).updateSetPoint(waarde_thermostaat).silent()
Is not working on setpoints... :roll: is ther another way?
Try to search for toon rooted in the search window of this forum. There are already quite a number of scripts (Lua end dzVents) to interact between a rooted Toon and domoticz
Debian buster, bullseye on RPI-4, Intel NUC.
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
Top
User avatar
EdwinK
Posts: 1820
Joined: Sunday 22 January 2017 21:46
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Rhoon
Contact:
Contact EdwinK

Re: Another noob question (toonInfo)

Post by EdwinK »

OedzesG wrote: ↑Monday 30 September 2019 12:39 I think i almoast finisching my script: ToonToDomoticz.

What do you think about it?

toon_domoticz_image.JPG
Spoiler: show

Code: Select all

local scriptVersion = '0.201909300100'
local scriptVar = 'ToonInfo_' .. scriptVersion

return
{
on = {
timer = { 'every 1 minutes' },
httpResponses = { scriptVar }},

logging =
{level = domoticz.LOG_DEBUG,
marker = scriptVar,},

execute = function(dz, item, devices)

-- INSTELLINGEN NAAR EIGEN SITUATIE --

local toonIP                    = '192.168.0.4' -- Toon thermostaat IP adres
local IDX_ToonScene             = 332 -- IDX nummer Toon thermostaat scene keuze-schakelaar
local IDX_ToonAutoProgramma     = 333 -- IDX nummer Toon auto programma keuze-schakelaar
local IDX_ToonThermostaat       = 334 -- IDX nummer toon thermostaat
local IDX_ToonKamerTemperatuur  = 335 -- IDX nummer kamer tamperatuur
local IDX_ToonModulatieNiveau   = 336 -- IDX nummer modulatie niveau custom sensor
local IDX_ToonActiviteit        = 337 -- IDX nummer Toon activiteit keuze-schakelaar

-- HIERONDER NIETS MEER VERANDEREN !! --

local function getToonInfo()

local url = 'http://' .. toonIP .. '/happ_thermstat?action=getThermostatInfo'
dz.openURL ({ url = url, callback = scriptVar })
end
local function processResult(jsonThermostatInfo)

local domoticz = dz

-- TOON SCENE --
local toon_scene = tonumber(jsonThermostatInfo.activeState)

if toon_scene == -1 then domoticz.log ('Programma Toon thermostaat = Handmatig')
elseif toon_scene == 0 then domoticz.log ('Programma Toon thermostaat = Comfort')
elseif toon_scene == 1 then domoticz.log ('Programma Toon thermostaat = Thuis')
elseif toon_scene == 2 then domoticz.log ('Programma Toon thermostaat = Slapen')
elseif toon_scene == 3 then domoticz.log ('Programma Toon thermostaat = Weg')
elseif toon_scene == 4 then domoticz.log ('Programma Toon thermostaat = Vakantie')
end
if toon_scene == -1 then toon_scene = 0
elseif toon_scene == 0 then toon_scene = 10
elseif toon_scene == 1 then toon_scene = 20
elseif toon_scene == 2 then toon_scene = 30
elseif toon_scene == 3 then toon_scene = 40
elseif toon_scene == 4 then toon_scene = 50
end
domoticz.devices(IDX_ToonScene).switchSelector(toon_scene)

-- TOON AUTO PROGRAMMA --
local auto_programma = tonumber(jsonThermostatInfo.programState)

if auto_programma == 0 then domoticz.log ('Toon automatisch programma = Uit')
elseif auto_programma == 1 then domoticz.log ('Toon automatisch programma = Aan')
elseif auto_programma == 2 then domoticz.log ('Toon automatisch programma = Aan met tijdelijk afwijkend programma')
elseif auto_programma == 8 then domoticz.log ('Toon automatisch programma = Aan met continu afwijkend programma')
end
if auto_programma == 0 then auto_programma = 0
elseif auto_programma == 1 then auto_programma = 10
elseif auto_programma == 2 then auto_programma = 20
elseif auto_programma == 8 then auto_programma = 30
end
domoticz.devices(IDX_ToonAutoProgramma).switchSelector(auto_programma)

-- TOON THERMOSTAAT --
local waarde_thermostaat = tonumber(jsonThermostatInfo.currentSetpoint) / 100
domoticz.log('Thermostaat = ' .. tostring(waarde_thermostaat), domoticz.LOG_INFO)
domoticz.devices(IDX_ToonThermostaat).updateSetPoint(waarde_thermostaat)

-- HUIDIGE KAMER TEMPERATUUR --
local kamer_temperatuur = domoticz.utils.round(tonumber(jsonThermostatInfo.currentTemp) / 100,1)
domoticz.log('Huidige woonkamer temp. = ' .. tostring(kamer_temperatuur), domoticz.LOG_INFO)
domoticz.devices(IDX_ToonKamerTemperatuur).updateTemperature(kamer_temperatuur)

-- MODULATIE NIVEAU --
local modulatie_niveau = tonumber(jsonThermostatInfo.currentModulationLevel)
domoticz.log('Modulatie niveau = ' .. tostring(modulatie_niveau), domoticz.LOG_INFO)
domoticz.devices(IDX_ToonModulatieNiveau).updateCustomSensor(modulatie_niveau)

-- TOON ACTIVITEIT --
local toon_activiteit = tonumber(jsonThermostatInfo.burnerInfo)

if toon_activiteit == 0 then domoticz.log ('Momenteel geen activiteit')
elseif toon_activiteit == 1 then domoticz.log ('Verwarmen CV')
elseif toon_activiteit == 2 then domoticz.log ('Verwarmen water')
end
if toon_activiteit == 0 then toon_activiteit = 0
elseif toon_activiteit == 1 then toon_activiteit = 10
elseif toon_activiteit == 2 then toon_activiteit = 20
end
domoticz.devices(IDX_ToonActiviteit).switchSelector(toon_activiteit)
end
-- main
if item.isTimer or item.isDevice then
getToonInfo()
elseif item.ok then -- statusCode == 2xx
local toonInfo = dz.utils.fromJSON(item.data )
processResult(toonInfo)
else
dz.log('Could not get (good) data from ' .. toonIP .. '\n' .. item.data ,dz.LOG_ERROR)
end
end
}
}
Spoiler: show
Using this script now. Next to do is the make the switches giving the switches the right names and such.
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | Hue | Tuya | IKEA tradfri | Dashticz V3 on Lenovo Huawei Tablet | Conbee
Top
Post Reply

Return to “dzVents”

Who is online

Users browsing this forum: No registered users and 1 guest