Geofence for Domoticz
Moderator: leecollings
-
- Posts: 625
- Joined: Thursday 02 October 2014 6:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.2
- Location: Geleen
- Contact:
Re: Geofence for Domoticz
I am not sure what turning wifi on and off adds to presence detection, except for the privacy, which has nothing to do with presence detection.
-
- Posts: 2
- Joined: Monday 18 December 2017 23:43
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Geofence for Domoticz
Hallo Appestijn,
Ik weet niet hoe ik je anders kan bereiken. Ik zie nergens een e-mailadres van jou. Ik heb jouw naam van iemand gekregen, welke aangaf dat jij veel verstand hebt van iets kunnen schakelen via software op een tablet. Mag ik aan jou mijn vraag voorleggen. Het liefst via de e-mail.
m.vr.gr.
Kasper de Beer
Ik weet niet hoe ik je anders kan bereiken. Ik zie nergens een e-mailadres van jou. Ik heb jouw naam van iemand gekregen, welke aangaf dat jij veel verstand hebt van iets kunnen schakelen via software op een tablet. Mag ik aan jou mijn vraag voorleggen. Het liefst via de e-mail.
m.vr.gr.
Kasper de Beer
-
- Posts: 134
- Joined: Friday 10 April 2015 23:53
- Target OS: Linux
- Domoticz version:
- Contact:
Re: Geofence for Domoticz
Check your PMs!Sandberg89a wrote: ↑Monday 18 December 2017 23:53 Hallo Appestijn,
Ik weet niet hoe ik je anders kan bereiken. Ik zie nergens een e-mailadres van jou. Ik heb jouw naam van iemand gekregen, welke aangaf dat jij veel verstand hebt van iets kunnen schakelen via software op een tablet. Mag ik aan jou mijn vraag voorleggen. Het liefst via de e-mail.
m.vr.gr.
Kasper de Beer
-
- Posts: 3
- Joined: Tuesday 10 January 2017 15:12
- Target OS: Windows
- Domoticz version: 3.8153
- Location: Denmark
- Contact:
Re: Geofence for Domoticz
I cannot get this app to work.
I am using Android 8 (Oreo), and the app does not register when I leave or enter the fence.
It only works when testing the connection .. outside the fence and testing, the virtual switch always remain on.
I am using Android 8 (Oreo), and the app does not register when I leave or enter the fence.
It only works when testing the connection .. outside the fence and testing, the virtual switch always remain on.
-
- Posts: 134
- Joined: Friday 10 April 2015 23:53
- Target OS: Linux
- Domoticz version:
- Contact:
Re: Geofence for Domoticz
Hmm, do you have the Google Play apps installed and is DomoFence authorized to access your location?gimlichael wrote: ↑Thursday 21 December 2017 9:22 I cannot get this app to work.
I am using Android 8 (Oreo), and the app does not register when I leave or enter the fence.
It only works when testing the connection .. outside the fence and testing, the virtual switch always remain on.
-
- Posts: 625
- Joined: Thursday 02 October 2014 6:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.2
- Location: Geleen
- Contact:
Re: Geofence for Domoticz
I also see some issues. The app was not working for some days and today I manually started the app. Looks like something stops the app....
Btw, I do not use any battery apps (besides Android's own)
Btw, I do not use any battery apps (besides Android's own)
-
- Posts: 134
- Joined: Friday 10 April 2015 23:53
- Target OS: Linux
- Domoticz version:
- Contact:
Re: Geofence for Domoticz
It looks like in Android 8.0 they changed the Geofencing API. I will have a look in the Christmas holidays.
-
- Posts: 625
- Joined: Thursday 02 October 2014 6:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.2
- Location: Geleen
- Contact:
Re: Geofence for Domoticz
Nope, still 7.x
-
- Posts: 3
- Joined: Tuesday 10 January 2017 15:12
- Target OS: Windows
- Domoticz version: 3.8153
- Location: Denmark
- Contact:
Re: Geofence for Domoticz
Yes, the app have the required permissions .. but like you wrote later, maybe a new API needs support?Appesteijn wrote: ↑Thursday 21 December 2017 13:59Hmm, do you have the Google Play apps installed and is DomoFence authorized to access your location?gimlichael wrote: ↑Thursday 21 December 2017 9:22 I cannot get this app to work.
I am using Android 8 (Oreo), and the app does not register when I leave or enter the fence.
It only works when testing the connection .. outside the fence and testing, the virtual switch always remain on.
Looking forward to be using your app.
-
- Posts: 9
- Joined: Wednesday 08 July 2015 8:48
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.6722
- Location: Beegden
- Contact:
Re: Geofence for Domoticz
Hi,
I have installed the app domofence, now I have the problem that it is only working when I connected to my Wifi. But when I connected to the mobile network I'm getting an error message http://IP:8080/json.htm?...... While I have acces to the webinterface from outside my LAN, someone any idea?
I have installed the app domofence, now I have the problem that it is only working when I connected to my Wifi. But when I connected to the mobile network I'm getting an error message http://IP:8080/json.htm?...... While I have acces to the webinterface from outside my LAN, someone any idea?
-
- Posts: 229
- Joined: Friday 03 April 2015 20:44
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Germany (near dutch border)
- Contact:
Re: Geofence for Domoticz
Is Domoticz accessable from the outside?..you should have access, otherwise you can't change a switch...
Regards, Hans
Regards, Hans
-
- Posts: 229
- Joined: Friday 03 April 2015 20:44
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Germany (near dutch border)
- Contact:
Re: Geofence for Domoticz
If thats the case its simple
http://username:password@yourIP:portnumber/etc
Hope this helps.
Hans
http://username:password@yourIP:portnumber/etc
Hope this helps.
Hans
-
- Posts: 9
- Joined: Wednesday 08 July 2015 8:48
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.6722
- Location: Beegden
- Contact:
Re: Geofence for Domoticz
- gjaa
- Posts: 38
- Joined: Thursday 12 February 2015 6:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: The Netherlands
- Contact:
Re: Geofence for Domoticz
I'm new to Domofence but is doesn't work, I've got an error
I use the same settings as Domoticz Lite
user and password are the same
Basic Auth is set
But when I use my home wifi and change the IP to the local IP-Address and port, then it's working
I'm using the app on Android 8.1 (Nexus 5x)
What's going wrong????
Gerard
I use the same settings as Domoticz Lite
user and password are the same
Basic Auth is set
But when I use my home wifi and change the IP to the local IP-Address and port, then it's working
I'm using the app on Android 8.1 (Nexus 5x)
What's going wrong????
Gerard
- gjaa
- Posts: 38
- Joined: Thursday 12 February 2015 6:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: The Netherlands
- Contact:
Re: Geofence for Domoticz
gjaa wrote: ↑Monday 15 January 2018 14:22 I'm new to Domofence but is doesn't work, I've got an error
I use the same settings as Domoticz Lite
user and password are the same
Basic Auth is set
But when I use my home wifi and change the IP to the local IP-Address and port, then it's working
I'm using the app on Android 8.1 (Nexus 5x)
What's going wrong????
Gerard
I started a browser on my phone and tried https://123.123.123.123:port/json.htm?type=command¶m=switchlight&idx=1234&switchcmd=On
I've got the message
{
"status" : "On" ,
"title" : "SwitchLight"
}
So that's working. But in the app, when I try "Test connection (ON)", I've got the message Error:https://123.123.123.123:port/json.htm?type=command¶m=switchlight&idx=1234&switchcmd=On
So what's the solution???
Gerard
- gjaa
- Posts: 38
- Joined: Thursday 12 February 2015 6:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: The Netherlands
- Contact:
Re: Geofence for Domoticz
gjaa wrote: ↑Wednesday 17 January 2018 16:33gjaa wrote: ↑Monday 15 January 2018 14:22 I'm new to Domofence but is doesn't work, I've got an error
I use the same settings as Domoticz Lite
user and password are the same
Basic Auth is set
But when I use my home wifi and change the IP to the local IP-Address and port, then it's working
I'm using the app on Android 8.1 (Nexus 5x)
What's going wrong????
Gerard
I started a browser on my phone and tried https://123.123.123.123:port/json.htm?type=command¶m=switchlight&idx=1234&switchcmd=On
I've got the message
{
"status" : "On" ,
"title" : "SwitchLight"
}
So that's working. But in the app, when I try "Test connection (ON)", I've got the message Error:https://123.123.123.123:port/json.htm?type=command¶m=switchlight&idx=1234&switchcmd=On
So what's the solution???
Gerard
Tested with the phone of my son (Android 6.0)
And it's working so it's a android 8 problem
Gerard
- gjaa
- Posts: 38
- Joined: Thursday 12 February 2015 6:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: The Netherlands
- Contact:
Re: Geofence for Domoticz
I stopped with Domofence
I use now https://www.domoticz.com/wiki/Presence_detection
This script checks the presence off the ip-addresses of the phones in the home network
Gerard
I use now https://www.domoticz.com/wiki/Presence_detection
This script checks the presence off the ip-addresses of the phones in the home network
Gerard
-
- Posts: 134
- Joined: Friday 10 April 2015 23:53
- Target OS: Linux
- Domoticz version:
- Contact:
Re: Geofence for Domoticz
I currently don't have much spare time to work on this. I'll post here when I have an update.
-
- Posts: 10
- Joined: Saturday 10 February 2018 14:14
- Target OS: -
- Domoticz version:
- Contact:
Re: Geofence for Domoticz
I try Miui 9.1 android 7.1 work finegjaa wrote:gjaa wrote: ↑Wednesday 17 January 2018 16:33gjaa wrote: ↑Monday 15 January 2018 14:22 I'm new to Domofence but is doesn't work, I've got an error
I use the same settings as Domoticz Lite
user and password are the same
Basic Auth is set
But when I use my home wifi and change the IP to the local IP-Address and port, then it's working
I'm using the app on Android 8.1 (Nexus 5x)
What's going wrong????
Gerard
I started a browser on my phone and tried https://123.123.123.123:port/json.htm?type=command¶m=switchlight&idx=1234&switchcmd=On
I've got the message
{
"status" : "On" ,
"title" : "SwitchLight"
}
So that's working. But in the app, when I try "Test connection (ON)", I've got the message Error:https://123.123.123.123:port/json.htm?type=command¶m=switchlight&idx=1234&switchcmd=On
So what's the solution???
Gerard
Tested with the phone of my son (Android 6.0)
And it's working so it's a android 8 problem
Gerard
I try custom rom 8.x, work fine...
Strange
Envoyé de mon Redmi Note 4 en utilisant Tapatalk
Who is online
Users browsing this forum: No registered users and 0 guests