Dashticz - Function - Graphs

[askmurphy]

Thanks!!

[askmurphy]

I have a litte problem with the graphs, this is inside my config:

https://mega.nz/#!ClkC1CpY!m2O-XP_TdQ24 ... V3MDRsrR3c

blocks[23] = {}
blocks[23]['width'] = 6;
blocks[23]['title'] = 'Zonnepanelen'
blocks[23]['hide_data'] = false;
blocks[23]['hide_lastupdate'] = true;
blocks[23]['icon'] = 'fa-circle';
blocks[23]['protected'] = false;

columns[1] = {}
columns[1]['blocks'] = ['graph_23']
columns[1]['width'] = 8;

columns[2] = {}
columns[2]['blocks'] = ['23_2','23_3',3,4]
columns[2]['width'] = 4;

If I click on the button 'afgelopen maand' I see on top still the amount of kWh what's produced in one day: 1.320kWh instead of
the produced energy of the month. How can this be fixed ?
We have a SolarEdge API..

[PieterS]

Build several graphs. Both display information about last week instead of today when I press the button Vandaag. Button last hours gives me a to short view of two hours. Last week is not what i want.

More users with same problem? Or is this configurationerror? Any solution?

[Zoekm]

Hello,

You can use the option

Code: Select all

config['standard_graph'] = 'hours'; 

to set the default graph to hours, days or month.

Hope this helps

Is there an option to not only set 'standard_graph' with this but also a different setting to a specific graph? So e.g. all graphs to 'month' except for only 1 that is set to 'day'?

[GuidoP18]

Is there a way to delete the buttons 'last hours, today, last month'?

[robgeerts]

In graphs.js you can change:

Code: Select all

var buttons = createButtons(idx, title, label, range, current, sensor, popup);

TO:

Code: Select all

var buttons = '';

Theres no setting for this (yet) ..

[GuidoP18]

Thanks Rob,

But i dit not find

Code: Select all

var buttons = createButtons(idx, title, label, range, current, sensor, popup);

and i'm new to programing so i don't want to mes things up.

[maceddy]

hello Rob. It's possible to do the selection of two values [idx_1] or [idx_2], like we do on the blocks.
I don't know if you remember , i made a request for this some time ago. Thank you

Hello. I would like this too. I want to have a graph for temperature only, without Humidity.
Aside from this, I would like to know if it is possible to have custom graph view per graph.

I would like to have the rain by month, but temperature by day... For example.. (without clicking offcourse)

[goshi0]

Hello.

Is there any way to make a pop-up with graph on touch a sensor like a temperature or humidity? Beacouse in the wiki hints it's possible but I didn't find how

[tontze]

Hi, i just noticed that my outdoor temperature graph is not working. Other are working. Cant push the button at all. It is sensor with humidity and temperature. This works in domoticz. its 433mhz (RFlink) device.

[maceddy]

Is there a way to delete the buttons 'last hours, today, last month'?

I added this line to the custom css..
Not a very neat option, but for me it does the trick...

Spoiler: show

.btn-default {
visibility:hidden; /* aangepast om knoppen in regengrafiek te verbergen */
}

[tlkg]

Just starting with Dashticz and everything is working pretty good except I can't get any of my devices that create data (i.e. temp, humidity, voltage) to display a graph. The buttons/blocks are created and display the correct data but they are not active buttons. When I mouse over them, the cursor never changes and/or the background doesn't change. These all work fine in Domoticz and when doing a json query the device IDX, all of the data is displayed. (http://192.168.1.35:6115/json.htm?type= ... &range=day)
{
"result" : [
{
"d" : "2018-01-22 11:30",
"v" : "119.601"
},
{
"d" : "2018-01-22 11:35",
"v" : "120.350"
},
{
"d" : "2018-01-22 11:40",
"v" : "120.850"
},
{
"d" : "2018-01-22 11:45",
"v" : "119.808"
}
],
"status" : "OK",
"title" : "Graph counter day"
}

Other devices like light bulbs and on/off switches work fine as well.

Reading the Wiki seems to imply that the graphing is setup automatically and should not require any coding to get it to work.

Is there something I need to add to CONFIG.js or other file to get these devices to display graphs?

Thanks for any help.

UPDATE Edit:
While the buttons still do not work, I have been able to create static graphs using the graphs_IDX. I was having problems using this method with my temp+Humidity sensor (only hum was being graphed) until I replaced the graphs.js with the latest Beta version. Now all the static graphs are working great. There are a bunch of other modules, that are newer, that are probably addressing other issues. I did replace the blocks.js with the latest Beta, but just got the white screen, so assuming there are other new dependencies in other modules that I didn't replace, so will wait until the Beta is available/released

Thx

[goshi0]

Just starting with Dashticz and everything is working pretty good except I can't get any of my devices that create data (i.e. temp, humidity, voltage) to display a graph. The buttons/blocks are created and display the correct data but they are not active buttons. When I mouse over them, the cursor never changes and/or the background doesn't change. These all work fine in Domoticz and when doing a json query the device IDX, all of the data is displayed. (http://192.168.1.35:6115/json.htm?type= ... &range=day)
{
"result" : [
{
"d" : "2018-01-22 11:30",
"v" : "119.601"
},
{
"d" : "2018-01-22 11:35",
"v" : "120.350"
},
{
"d" : "2018-01-22 11:40",
"v" : "120.850"
},
{
"d" : "2018-01-22 11:45",
"v" : "119.808"
}
],
"status" : "OK",
"title" : "Graph counter day"
}

Other devices like light bulbs and on/off switches work fine as well.

Reading the Wiki seems to imply that the graphing is setup automatically and should not require any coding to get it to work.

Is there something I need to add to CONFIG.js or other file to get these devices to display graphs?

Thanks for any help.

Me neither, same as you.

[whatisk]

Whenever I click on a device that also can display a graph, I get the message <domoticz ip>:<domoticz port> says: Could not load graph!
Have I missed a configuration somewhere?

The graph displays fine in the standard Domoticz dashboard.
I am running the latest Beta Dashticz

Also, is there a way to change the number format/separator in Dashticz? Ie: have a comma as the thousand separator and a dot as the decimal point.

[whatisk]

Whenever I click on a device that also can display a graph, I get the message <domoticz ip>:<domoticz port> says: Could not load graph!

Found out what the issue was.

If I removed config['standard_graph'] = 'today'; from my CONFIG.js then graphs load without issue.
Correct option is 'day' not 'today'

[10us]

Is it possible to select how many points you want in a graph?
Because for the solar panels i have a point every hour and for the p1 energy usage every 5 min?
And both i like to change solar more points and p1 energie usage less point for a smoother graph.

Anyone who have done this? I would like to have a smooth graphs (day view).

[javed222pi]

Hi all,
I’m try to insert an CO2 (air quality) graph, in my dashticz dashboard, but I cant …

Captura.JPG (15.43 KiB) Viewed 4880 times

i can see the block data, but the graph not show nothing
How I must to do? I must to edit graphs.js ? but how??
Please help
Thanks

[robgeerts]

Hi all,
I’m try to insert an CO2 (air quality) graph, in my dashticz dashboard, but I cant …
Captura.JPG
i can see the block data, but the graph not show nothing
How I must to do? I must to edit graphs.js ? but how??
Please help
Thanks

Could you send me the output of this device from:
http://domoticz_url/json.htm?type=devices&plan=0&filter=all&used=true&order=Name

[javed222pi]

Hi robgeerts!! Thank you for your answer!
You need this ?:
{
"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 255,
"CustomImage" : 0,
"Data" : "432 ppm",
"Description" : "",
"Favorite" : 0,
"HardwareID" : 10,
"HardwareName" : "Netatmo 15R",
"HardwareType" : "Netatmo",
"HardwareTypeVal" : 54,
"HaveTimeout" : false,
"ID" : "0075",
"LastUpdate" : "2018-04-25 18:15:16",
"Name" : "NA Indoor",
"Notifications" : "false",
"PlanID" : "4",
"PlanIDs" : [ 4 ],
"Protected" : false,
"Quality" : "Excellent",
"ShowNotifications" : true,
"SignalLevel" : "-",
"SubType" : "Voltcraft CO-20",
"Timers" : "false",
"Type" : "Air Quality",
"TypeImg" : "air",
"Unit" : 19,
"Used" : 1,
"XOffset" : "432",
"YOffset" : "860",
"idx" : "133"
},

[robgeerts]

Yes i did, will check this out asap!