Xiaomi Smart Home Suite (very cheap) compatibilty?

[DAVIZINHO]

With pasd2php:

Code: Select all

if(timestamp('motion')<time-1800&&status('motion')=='Off'&&status('purifier')=='On')sw('purifier','Off');

thanks thanks thanks thanks. thankssss!!!!


EDIT,
no maters! i find this:
https://www.domoticz.com/wiki/Event_script_examples
With the exact example of motion sensor and 30 minutes. jejeje
thanks anyway!

[deennoo]

i use this blocky to turn on the purifier.
But i want to create a blocky to turn OFF the purifier when not detect movement in "movement sensor" in 30 minutes

Use LUA that the only way to do your script

ok, thanks for the info.
Can you tell me how can i make this on lua?.
I only need help for the "if" comand because i dont know how to program the "if sensor not detect move in 30min then"

Search for timedifference, there is various way to arrive to thé same result.

Lots of exemple on m'y blog

[Peggy]

I was able to update the gateway firmware to 1.4.1_150.0134 with the latest iOS version of the MiHome App. Finally, the left button of the wall switches works again!!

Idem here. Hope it won't reproduce, my home starts to be dependant of some xiaomi stuff...
I stop upgrading mi home for a while.

[pandemicz]

i use this blocky to turn on the purifier.
But i want to create a blocky to turn OFF the purifier when not detect movement in "movement sensor" in 30 minutes

OK, default sensor timeout is 2 minutes, so have you tryed to add a line to blocky:

Else if => Motion Sensor = Off
Set => Purifier = Off => After 28 minutes

I'm not 100% sure, had problems with Blocky logics myself, especially with timing, but give it a try.

[CherAlban]

Hi,

I have multiple temperature/humidity/pressure sensors installed. My understanding is that these sensors only transmit updates if any of the values "significantly changed".

Is there any possibility to force them to send updates more regularly?

Thanks for your answers

CherAlban

[DAVIZINHO]

i use this blocky to turn on the purifier.
But i want to create a blocky to turn OFF the purifier when not detect movement in "movement sensor" in 30 minutes

OK, default sensor timeout is 2 minutes, so have you tryed to add a line to blocky:

Else if => Motion Sensor = Off
Set => Purifier = Off => After 28 minutes

I'm not 100% sure, had problems with Blocky logics myself, especially with timing, but give it a try.

Solved, i use this lua script:

Code: Select all

-- script_time_nomotion.lua
 
local motion_switch = 'Motion'
local nomotion_uservar = 'nomotionCounter'
local status_switch = 'SomeoneHome'
 
commandArray = {}
 
no_motion_minutes = tonumber(uservariables[nomotion_uservar])
 
if (otherdevices[motion_switch] == 'Off') then
   no_motion_minutes = no_motion_minutes + 1
   --print('<font color="red">No motion has been detected for: ' ..no_motion_minutes.. ' minutes</font>')
else
   no_motion_minutes = 0   
end
 
commandArray['Variable:' .. nomotion_uservar] = tostring(no_motion_minutes)
 
if otherdevices[status_switch] == 'On' and no_motion_minutes > 30 then --change the 30 to the amount of minutes you prefer
    commandArray[status_switch]='Off'
end
 
return commandArray

and i create a user variable called "nomotionCounter" tipe "integer" and value "0"

With this script, works perfect the shutdown of the purifier after 30 minutes of inactivity in the sensor

[sincze]

With pass2php:

Code: Select all

if(timestamp('motion')<time-1800&&status('motion')=='Off'&&status('purifier')=='On')sw('purifier','Off');

Can it be more simple?
Let's see how much code you'll need in lua to do the same...

It seems we can find Pass2php pretty much everywhere (for a good reason) around the Domoticz forum.

Just finished reading 98 pages of thread. I must say. WOW. A lot of progress.
Can't wait what will come next.

My house has 433. OpenZwave and now...
Just received the Xiaomi gateway, body sensor and some door/window sensors.
After following the domoticz-wiki everything was up and running.

I'm still connected to the 'chinese' server from within the app.
Don't know if I have to change to the US or different one for a good reason?
Tried it but then all devices were gone (in the APP). After switchting back I could see them again.

Only problem I'm facing is the 'white' led light within the Xiaomi gateway.
The colour picker pressing 'on' it turns 100% white. Howeve I want to dim it.

I can control all colours and brightness (from within the colour picker and via domoticz api) except the white one
(Switching On / Off does work). And ofcourse within the app it does all work nicely.

Any RGB Colour I can select via:

Code: Select all

http://192.168.1.2:8080/json.htm?type=command&param=setcolbrightnessvalue&idx=12&hue=38&brightness=83&iswhite=false

Colour White (ON/Off no problem)

Code: Select all

On: http://192.168.1.2:8080/json.htm?type=command&param=switchlight&idx=12&switchcmd=On&level=0&passcode=
Off: http://192.168.1.2:8080/json.htm?type=command&param=switchlight&idx=12&switchcmd=Off&level=0&passcode=

And no the following did not work for me to produce white light

Code: Select all

On: http://192.168.1.2:8080/json.htmtype=command&param=setcolbrightnessvalue&idx=12&hue=38&brightness=83&iswhite=true

And yes I am using Pass2php as well

[Egregius]

I just want to prove how easy it can be
Seen the difference in code between pass2php and lua?

On topic: my Xiaomi gateway is still on the road
I didn't read much about it,just ordered one...
What do you mean by 'connected to Chinese server'? Don't say you can't use it without external stuff...

[sincze]

I just want to prove how easy it can be
Seen the difference in code between pass2php and lua?

I spotted the difference Instantly

On topic: my Xiaomi gateway is still on the road
I didn't read much about it,just ordered one...
What do you mean by 'connected to Chinese server'? Don't say you can't use it without external stuff...

Yes mine was on offer for under 15 euro so could not resist myself.
I followed the wiki

Spoiler: show

https://www.domoticz.com/wiki/Xiaomi_Gateway_(Aqara)

Had to install the APP first and create an account. It will ask you to what server you want to connect.
However as I read Chinese in the wiki.. I thought.. go for the Chinese server, but with your Xiaomi account you can connect to different servers as wel, but after switching to the other server my gateway and configured sensors were gone.

But back to configuration on the Chinese server:
After connecting the gateway to the wifi and enabling development mode I think you are able to use the device locally (have to modify the firewall to block traffic to be sure). However for adding additional devices I still needed to use the APP but did not sniff enough traffic to see if that information is uploaded to China.

Small warning: The APP offered me a newer update... by downloading it from the website and not using the Playstore... skipped that one for security reasons. Eventually it will end up in the Playstore.

So hope it arrives soon for you and we will see the updated functions on your github

[Sevift]

I can control all colours and brightness (from within the colour picker and via domoticz api) except the white one
(Switching On / Off does work). And ofcourse within the app it does all work nicely.

Any RGB Colour I can select via:

Code: Select all

http://192.168.1.2:8080/json.htm?type=command&param=setcolbrightnessvalue&idx=12&hue=38&brightness=83&iswhite=false

Colour White (ON/Off no problem)

Code: Select all

On: http://192.168.1.2:8080/json.htm?type=command&param=switchlight&idx=12&switchcmd=On&level=0&passcode=
Off: http://192.168.1.2:8080/json.htm?type=command&param=switchlight&idx=12&switchcmd=Off&level=0&passcode=

And no the following did not work for me to produce white light

Code: Select all

On: http://192.168.1.2:8080/json.htmtype=command&param=setcolbrightnessvalue&idx=12&hue=38&brightness=83&iswhite=true

And yes I am using Pass2php as well

I once wrote the code for DzVents

Code: Select all

return {

	active = true, 

	on = {
		devices = {
			'Mi Gateway RGB'
		}
	},
	
	logging = {
        level = domoticz.LOG_ERROR
    },

	execute = function(domoticz, device)
	    
	    local miGateway = domoticz.devices(domoticz.globalData.MiGateway)
	    local url = "http://192.168.100.13:8080/json.htm?param=setcolbrightnessvalue&type=command&idx="..miGateway.idx.."&hex="
	    
	    local scene = {}
        scene[#scene+1] = {'Red',    'FF0000'}
        scene[#scene+1] = {'Yellow', 'FFFF00'}
        scene[#scene+1] = {'Blue',   '0000FF'}
        scene[#scene+1] = {'Purple', '800080'}
        scene[#scene+1] = {'Magenta','FF0099'}
        scene[#scene+1] = {'Green',  '008000'}
	    
	    if device.levelName == 'Off' and miGateway.state == 'On' then
            miGateway.switchOff()
    
        elseif device.levelName == 'White' then
            miGateway.switchOff()
            miGateway.switchOn()
    
        else
		    for i in pairs(scene) do
                if device.levelName == scene[i][1] then
                    local sceneCmd = 'curl -s '..'"'..url..scene[i][2]..'&iswhite=false'..'"'..' &'
                    os.execute(sceneCmd)
                end
            end    
        end 
	end
}

[sincze]

I once wrote the code for DzVents

Code: Select all

return {

	active = true, 

	on = {
		devices = {
			'Mi Gateway RGB'
		}
	},
	
	logging = {
        level = domoticz.LOG_ERROR
    },

	execute = function(domoticz, device)
	    
	    local miGateway = domoticz.devices(domoticz.globalData.MiGateway)
	    local url = "http://192.168.100.13:8080/json.htm?param=setcolbrightnessvalue&type=command&idx="..miGateway.idx.."&hex="
	    
	    local scene = {}
        scene[#scene+1] = {'Red',    'FF0000'}
        scene[#scene+1] = {'Yellow', 'FFFF00'}
        scene[#scene+1] = {'Blue',   '0000FF'}
        scene[#scene+1] = {'Purple', '800080'}
        scene[#scene+1] = {'Magenta','FF0099'}
        scene[#scene+1] = {'Green',  '008000'}
	    
	    if device.levelName == 'Off' and miGateway.state == 'On' then
            miGateway.switchOff()
    
        elseif device.levelName == 'White' then
            miGateway.switchOff()
            miGateway.switchOn()
    
        else
		    for i in pairs(scene) do
                if device.levelName == scene[i][1] then
                    local sceneCmd = 'curl -s '..'"'..url..scene[i][2]..'&iswhite=false'..'"'..' &'
                    os.execute(sceneCmd)
                end
            end    
        end 
	end
}

Tnx for sharing. If I read your code correctly you are able to give the Xiaomi Gateway several Colours (thats great, Í'm able to reproduce that). In addition if you switch it ON it will produce the colour white. My question would be. Are you able to DIM the white light to lets say 10%? I'm no code-wizard to be honest so I was unable to read that from your code. DIM the white LED to any level of the Xiaomi Gateway is that possible? Any other colour I am able to DIM to the level I want, except White.

[chatainsim]

Does anyone know how to solve this :

Code: Select all

2017-09-26 00:07:57.047 User: admin initiated a switch command (389/Xiaomi Smart Plug 2/On)
2017-09-26 00:07:57.294 (Gateway) Light/Switch (Xiaomi Smart Plug 2)
2017-09-26 00:08:01.970 User: admin initiated a switch command (389/Xiaomi Smart Plug 2/Off)
[b]2017-09-26 00:08:02.121 Error: XiaomiGateway: unable to write command - Invalid Key
[/b]2017-09-26 00:08:02.121 XiaomiGateway: SendMessageToGateway failed on first attempt, will try again
[b]2017-09-26 00:08:02.371 Error: XiaomiGateway: unable to write command - Invalid Key
[/b]2017-09-26 00:08:05.552 User: admin initiated a switch command (389/Xiaomi Smart Plug 2/Off)
[b]2017-09-26 00:08:05.703 Error: XiaomiGateway: unable to write command - Invalid Key
[/b]2017-09-26 00:08:05.703 XiaomiGateway: SendMessageToGateway failed on first attempt, will try again
[b]2017-09-26 00:08:05.954 Error: XiaomiGateway: unable to write command - Invalid Key
[/b]2017-09-26 00:08:08.801 User: admin initiated a switch command (389/Xiaomi Smart Plug 2/Off)
2017-09-26 00:08:08.977 {"cmd":"report","model":"plug","sid":"158d00012a42ca","short_id":49876,"data":"{\"status\":\"off\"}"}
2017-09-26 00:08:09.077 (Gateway) Light/Switch (Xiaomi Smart Plug 2)

I've double checked the key and it's the good one. I've also try to reset it but still.

[sincze]

Your gateway password still okay?
Don't exactly know what key the gateway is talking about but could be the generated access token.

[matteos1]

is this correct
this is sensor for door/windows
if door is open netatmo go to away
else in on

Cattura.PNG (16.15 KiB) Viewed 3177 times

[matteos1]

how is it possible some error in sqlite database?
2017-09-26 14:35:06.418 Error: SQL Query("DELETE FROM Percentage WHERE strftime('%s',datetime('now','localtime')) - strftime('%s',Date) > (SELECT p.nValue * 86400 From Preferences AS p WHERE p.Key='5MinuteHistoryDays')") : database disk image is malformed
2017-09-26 14:40:07.487 Error: SQL Query("DELETE FROM Percentage WHERE strftime('%s',datetime('now','localtime')) - strftime('%s',Date) > (SELECT p.nValue * 86400 From Preferences AS p WHERE p.Key='5MinuteHistoryDays')") : database disk image is malformed
2017-09-26 14:45:05.344 Error: SQL Query("DELETE FROM Percentage WHERE strftime('%s',datetime('now','localtime')) - strftime('%s',Date) > (SELECT p.nValue * 86400 From Preferences AS p WHERE p.Key='5MinuteHistoryDays')") : database disk image is malformed
2017-09-26 14:50:07.817 Error: SQL Query("DELETE FROM Percentage WHERE strftime('%s',datetime('now','localtime')) - strftime('%s',Date) > (SELECT p.nValue * 86400 From Preferences AS p WHERE p.Key='5MinuteHistoryDays')") : database disk image is malformed
2017-09-26 14:55:07.184 Error: SQL Query("DELETE FROM Percentage WHERE strftime('%s',datetime('now','localtime')) - strftime('%s',Date) > (SELECT p.nValue * 86400 From Preferences AS p WHERE p.Key='5MinuteHistoryDays')") : database disk image is malformed

[sincze]

how is it possible some error in sqlite database?
2017-09-26 14:35:06.418 Error: SQL Query("DELETE FROM Percentage WHERE strftime('%s',datetime('now','localtime')) - strftime('%s',Date) > (SELECT p.nValue * 86400 From Preferences AS p WHERE p.Key='5MinuteHistoryDays')") : database disk image is malformed
2017-09-26 14:40:07.487 Error: SQL Query("DELETE FROM Percentage WHERE strftime('%s',datetime('now','localtime')) - strftime('%s',Date) > (SELECT p.nValue * 86400 From Preferences AS p WHERE p.Key='5MinuteHistoryDays')") : database disk image is malformed
2017-09-26 14:45:05.344 Error: SQL Query("DELETE FROM Percentage WHERE strftime('%s',datetime('now','localtime')) - strftime('%s',Date) > (SELECT p.nValue * 86400 From Preferences AS p WHERE p.Key='5MinuteHistoryDays')") : database disk image is malformed
2017-09-26 14:50:07.817 Error: SQL Query("DELETE FROM Percentage WHERE strftime('%s',datetime('now','localtime')) - strftime('%s',Date) > (SELECT p.nValue * 86400 From Preferences AS p WHERE p.Key='5MinuteHistoryDays')") : database disk image is malformed
2017-09-26 14:55:07.184 Error: SQL Query("DELETE FROM Percentage WHERE strftime('%s',datetime('now','localtime')) - strftime('%s',Date) > (SELECT p.nValue * 86400 From Preferences AS p WHERE p.Key='5MinuteHistoryDays')") : database disk image is malformed

Mmm interesting,
May I suggest you create a new thread for this one? As sql errors are a different story to this topic: "Xiaomi Smart Home Suite (very cheap) compatibilty?"

[chatainsim]

Your gateway password still okay?
Don't exactly know what key the gateway is talking about but could be the generated access token.

Yes, password is ok.
Sometimes it works sometimes not.

Does someone know how the messages are sent to the gateway ?
Is it broadcast ? Maybe the other Gateway (not configure in domoticz) answer ?

[sincze]

Mmm call be a donut.
The following happened.
Someone took out the Gateway from the power socket.
After re-attaching it to the powersupply All sensors start working (motion / door). However I am unable to control the LED on the gateway itself (Xiaomi RGB) and Xiaomi Gateway Alarm Ringtone / MP3 / Doorbell e.g. from the Domoticz Webinterface.

The log says:

Code: Select all

2017-09-27 20:06:53.628 (GW-Xiaomi) Lighting Limitless/Applamp (Xiaomi RGB Gateway)
2017-09-27 20:06:53.970 (GW-Xiaomi) Lighting Limitless/Applamp (Xiaomi RGB Gateway)

However Noting really happens. How is it possible that all sensors work but not the gateway. If I use the Xiaomi APP I can switch on the LED light and play doorbell sounds. That would mean the Gateway is not broken

[sincze]

Haha, well let me answer my own donut question.

For some reason the Static IP did not work.
I found out via the Xiaomi APP that the gateway jumped to a different IP address.. After changing that in Domoticz all worked fine again.
Question remains... why didn't domoticz notice and why do all sensors still work when I entered the wrong IP for the Gateway. Stopping and Starting the hardware device in Domoticz doesn't result in an error message as well.

[Wob76]

Hi,

I have discovered a strange issue with the Power Sockets (Zigbee) when using MQTT. The units function fine, and will turn on\off as expected from Domoticz, and via HTTP JSON Calls, if however I toggle the switch from MQTT nothing happens, the switch in Domoticz will still toggle on\off, but the socket itself will not. I have tried a couple of devices with the same results, looking at domoticz and the logs it all seems to be functioning fine, but the message is just not making it to the socket. Any ideas?

Thanks,
Wob