Xiaomi Smart Home Suite (very cheap) compatibilty?

[superelch]

Hi there I have a aqara http://www.gearbest.com/access-control/pp_626696.htmlpush button. I am trying to configure it to use on/off. However it shows on but I can not switch it off if i press the button again, tried delay on button off button on/off button nothing is working

Is nobody using one of these wireless wall switches?

I use blocky as the switch dont send on / off...... just "click"
ist a button, not a switch

[Andae]

Hi all
I know the questions has been asked before, but I didn't find an answer.
I have a Xiaomi Cube, what are the movements for "alert" and "swing". All other options work fine.

Thanks to those who integrated the Xiaomi Gateway to Domotizc. Love it.

[theo69]

Hi, thanks for the tipp! Could you show me you blocky screenshot, I tried but failed (new to this)

Hi there I have a aqara http://www.gearbest.com/access-control/pp_626696.htmlpush button. I am trying to configure it to use on/off. However it shows on but I can not switch it off if i press the button again, tried delay on button off button on/off button nothing is working

Is nobody using one of these wireless wall switches?

I use blocky as the switch dont send on / off...... just "click"
ist a button, not a switch

[theo69]

Hi, thanks for the tipp! Could you show me you blocky screenshot, I tried but failed (new to this)

Is nobody using one of these wireless wall switches?

I use blocky as the switch dont send on / off...... just "click"
ist a button, not a switch

Sort of working Einzelschalter = Aqara Wireless Single Switch, Testschalter = Dummy Switch

screenshot_41.png (79.42 KiB) Viewed 2984 times

[quack3d]

This works nicely for my wireless buttons (the round ones). Click = 5% light. Double Click is 30 % and Long Click is 100 %. One click if lamp is on = turn off. I have Off Delay set to 1 second on the switch. Bryter - nattlampe = Switch, Soverom - Nattlampe = light.

2017-06-08 18_14_43-Domoticz.png (58.82 KiB) Viewed 2974 times

[Mooseknuckle]

Hi there,

For those of you that are interested:
http://faire-ca-soi-meme.fr/news/2017/0 ... ticipatif/
A kickstarter project for a universal Zigbee gateway, a really nice way to get around the max of 30 devices from the xiaomi gateway.

[deennoo]

Sory for asking but is it on your blog already?
Cant find it.

A simple how to is online for yeelight bedside lamp & Domoticz : http://domo-attitude.fr/tuto-lampe-de-c ... -domoticz/

That in simple french word, google translate do a good job, i'll provied a how to on domoticz wiki next week.

If some one can help by provieding a Python Plugin this can be perfect

[benbammens]

I just got an update for the gateway (1.4.1_147.0143) but still can not see the new temperature sensor...

[SwordFish]

Sory for asking but is it on your blog already?
Cant find it.

A simple how to is online for yeelight bedside lamp & Domoticz : http://domo-attitude.fr/tuto-lampe-de-c ... -domoticz/

That in simple french word, google translate do a good job, i'll provied a how to on domoticz wiki next week.

If some one can help by provieding a Python Plugin this can be perfect

Thanks will try it asap



Verzonden vanaf mijn iPhone met Tapatalk

[deennoo]

I just got an update for the gateway (1.4.1_147.0143) but still can not see the new temperature sensor...

Same for me, i believe that until we can't see pictures of the square device they are not inclueded

[benbammens]

I just got an update for the gateway (1.4.1_147.0143) but still can not see the new temperature sensor...

Same for me, i believe that until we can't see pictures of the square device they are not inclueded

Probably. But the weird thing is, the sensors seems to connect when I do the pairing and in the Mi Home app it says "2 devices connected" under the gateway (I have 2 sensors). But they just don't show up...

Let's hope it gets fixed soon.

I find it weird they sell these sensors without support in the app...

[warmaniac]

There is update for xiaomi gateway today , let's test it if it was fixed up.


Odoslané z môjho iPhone cez Tapatalk

[benbammens]

There is update for xiaomi gateway today , let's test it if it was fixed up.


Odoslané z môjho iPhone cez Tapatalk

It wasn't...

[Swifty]

Does anyone have any suggestions for a (cheap) doorbell pusher that can be fitted outside? (in the British weather!)
My current doorbell (some Siemens junk) keeps failing, so I'd like to get a wireless button that is weather proof which I can integrate with Domoticz to trigger the Xiaomi gateways

At the risk of talking to myself - I have now found a solution for this

I took a spare Xiaomi door sensor, pulled it apart and wired a push button between GND and D0 pins, then fitted it all inside my old doorbell pusher casing.
Now I have a Xiaomi smart doorbell - The gateway rings when the doorbell is pushed (using a bit of blocky in Domoticz).

However, I've noticed that once the tune has finished playing on the gateway, the state of the 'Xiaomi Smart Gateway Doorbell' (the one where you pick a sound) does not go back to 'Off' state in Domoticz - is this normal?

[theo69]

This works nicely for my wireless buttons (the round ones). Click = 5% light. Double Click is 30 % and Long Click is 100 %. One click if lamp is on = turn off. I have Off Delay set to 1 second on the switch. Bryter - nattlampe = Switch, Soverom - Nattlampe = light.
2017-06-08 18_14_43-Domoticz.png

Great thanks for the tipp with, now i dont need the delay

[theo69]

Does anyone have any suggestions for a (cheap) doorbell pusher that can be fitted outside? (in the British weather!)
My current doorbell (some Siemens junk) keeps failing, so I'd like to get a wireless button that is weather proof which I can integrate with Domoticz to trigger the Xiaomi gateways

At the risk of talking to myself - I have now found a solution for this

I took a spare Xiaomi door sensor, pulled it apart and wired a push button between GND and D0 pins, then fitted it all inside my old doorbell pusher casing.
Now I have a Xiaomi smart doorbell - The gateway rings when the doorbell is pushed (using a bit of blocky in Domoticz).

However, I've noticed that once the tune has finished playing on the gateway, the state of the 'Xiaomi Smart Gateway Doorbell' (the one where you pick a sound) does not go back to 'Off' state in Domoticz - is this normal?

Did you try a off delay of 1 sec?

[chatainsim]

Does anyone have any suggestions for a (cheap) doorbell pusher that can be fitted outside? (in the British weather!)
My current doorbell (some Siemens junk) keeps failing, so I'd like to get a wireless button that is weather proof which I can integrate with Domoticz to trigger the Xiaomi gateways

At the risk of talking to myself - I have now found a solution for this

I took a spare Xiaomi door sensor, pulled it apart and wired a push button between GND and D0 pins, then fitted it all inside my old doorbell pusher casing.
Now I have a Xiaomi smart doorbell - The gateway rings when the doorbell is pushed (using a bit of blocky in Domoticz).

However, I've noticed that once the tune has finished playing on the gateway, the state of the 'Xiaomi Smart Gateway Doorbell' (the one where you pick a sound) does not go back to 'Off' state in Domoticz - is this normal?

You're not talking only to yourself
I'm interested about this. Can you post some pics of your setup?
Thanks

[Swifty]

@theo69 - I did think about that, but when I clicked the gateway doorbell sound device to 'Off' while the sound was playing it stopped the sound mid-playback.
I guess I could time the playback and set the off delay accordingly - but I figured the device should go back to 'off' once the sound finished by it's self?

@chatainsim - Sure, I will try and detail what I've done slightly more once I return home later.

[deennoo]

@theo69 - I did think about that, but when I clicked the gateway doorbell sound device to 'Off' while the sound was playing it stopped the sound mid-playback.
I guess I could time the playback and set the off delay accordingly - but I figured the device should go back to 'off' once the sound finished by it's self?

@chatainsim - Sure, I will try and detail what I've done slightly more once I return home later.

Forget about blocky this doesn't fit to your need and it doesn't help to learn and understand how domoticz is powerfull...

You need to use a Lua script with :

if devicechanged = this command trigger your script only if the device ? changed of course ! he don't care about which state it was before (On off click long Click etc)

For a doorbell every body have his own way to ring, simple clikc, double click, long clik....

You start point have to be :

if devicechanged['xiaomiroundswitchbutton'] then
commendarray['Xiaomi doorbell'] = 'Set level : xx'

[deennoo]

@theo69 - I did think about that, but when I clicked the gateway doorbell sound device to 'Off' while the sound was playing it stopped the sound mid-playback.
I guess I could time the playback and set the off delay accordingly - but I figured the device should go back to 'off' once the sound finished by it's self?

@chatainsim - Sure, I will try and detail what I've done slightly more once I return home later.

Forget about blocky this doesn't fit to your need and it doesn't help to learn and understand how domoticz is powerfull...

You need to use a Lua script with :

if devicechanged = this command trigger your script only if the device ? changed of course ! he don't care about which state it was before (On off click long Click etc)

For a doorbell every body have his own way to ring, simple clikc, double click, long clik....

You start point have to be :

Code: Select all

if devicechanged['xiaomiroundswitchbutton'] then 
   commendarray['Xiaomi doorbell'] = 'Set level : xx'[/quote]