Xiaomi Smart Home Suite (very cheap) compatibilty?

[corbin]

Ok, done

perfect!

[corbin]

My other sensors works well, like human body , door, but this new not appearing in new devices , i can't see it at log file when added , already restarted xiaomi gateway try to compile new beta version of domoticz , nothing works , has anybody idea ? Thanks

I think it is need of a firmware update, probably not much longer to wait

[benbammens]

Hi there , i want to ask if somebody use the new temperature and humidity sensor link : http://m.gearbest.com/access-control/pp_626702.html

My other sensors works well, like human body , door, but this new not appearing in new devices , i can't see it at log file when added , already restarted xiaomi gateway try to compile new beta version of domoticz , nothing works , has anybody idea ? Thanks

I have the same problem. The app says there are 2 sub devices (I have 2 temp sensors) but they do not show up in the list... Not in the app, not in Domoticz.

I have ordered 1 older sensor too see if that will work.

I read somewhere that the ios app does work OK with the new sensor. I'm not an Apple guy so can't test...

[warmaniac]

In ios app it is ok, showing both new temperature sensors correctly

Hi there , i want to ask if somebody use the new temperature and humidity sensor link : http://m.gearbest.com/access-control/pp_626702.html

My other sensors works well, like human body , door, but this new not appearing in new devices , i can't see it at log file when added , already restarted xiaomi gateway try to compile new beta version of domoticz , nothing works , has anybody idea ? Thanks

I have the same problem. The app says there are 2 sub devices (I have 2 temp sensors) but they do not show up in the list... Not in the app, not in Domoticz.

I have ordered 1 older sensor too see if that will work.

I read somewhere that the ios app does work OK with the new sensor. I'm not an Apple guy so can't test...

[Swifty]

@StefanoA - My suggestion was just a shot in the dark based on the trouble you described, so I'm glad it's working for you now

Does anyone have any suggestions for a (cheap) doorbell pusher that can be fitted outside? (in the British weather!)
My current doorbell (some Siemens junk) keeps failing, so I'd like to get a wireless button that is weather proof which I can integrate with Domoticz to trigger the Xiaomi gateways

[benbammens]

In ios app it is ok, showing both new temperature sensors correctly

Lucky you. Hope they update the android app soon...

[warmaniac]

Im looking at wireshark output by UDP packets xiaomi gateway sending report only for gateway, motion and magnet sensors , that it must by failure of xiaomi gateway not domoticz .

[deennoo]

Hi there , i want to ask if somebody use the new temperature and humidity sensor link : http://m.gearbest.com/access-control/pp_626702.html

My other sensors works well, like human body , door, but this new not appearing in new devices , i can't see it at log file when added , already restarted xiaomi gateway try to compile new beta version of domoticz , nothing works , has anybody idea ? Thanks

Confirming m'y observation.

Xiaomi didn't update Gateway already for n'es design devices. App pictures doesn't show the Real one.

We have to wait from Xiaomi Update

[doxikus]

Hi there , i want to ask if somebody use the new temperature and humidity sensor link : http://m.gearbest.com/access-control/pp_626702.html

My other sensors works well, like human body , door, but this new not appearing in new devices , i can't see it at log file when added , already restarted xiaomi gateway try to compile new beta version of domoticz , nothing works , has anybody idea ? Thanks

Yep, I have the same problem, waiting for APP update . There is a few video reviews and they said that new sensor type (aqara, cubed shape) works on iOS. Se we need to wait for update on Android.

[theo69]

Hi i have the Dual Button Wireless Switch http://www.gearbest.com/alarm-systems/pp_610095.html in my domoticz it shows like:

screenshot_36.png (72.42 KiB) Viewed 2541 times

however it shows not supported in homekit ;-(, need some help

[theo69]

I also have the single wireless wall switch http://www.gearbest.com/access-control/pp_626696.html I can switch it on but not off (both homekit and domotics Dashboard, it shows like this:

screenshot_37.png (52.96 KiB) Viewed 2540 times

I tried Selector and on/off, however its not working

[marcotrumpet]

Try to set an off delay in switch settings to 1 sec

Inviato dal mio SM-G950F utilizzando Tapatalk

[theo69]

Thanks, however if i do that i only can switch off and in homekit the switch goes on and 1 second later off

[warmaniac]

Android app update did not solve problem with domoticz visibility of device, hopeit solves gateway update


Odoslané z môjho iPhone cez Tapatalk

[theo69]

Hi there I have a aqara http://www.gearbest.com/access-control/pp_626696.htmlpush button. I am trying to configure it to use on/off. However it shows on but I can not switch it off if i press the button again, tried delay on button off button on/off button nothing is working

[langoo]

Hello

I got the new type of temperature/humidity sensor today from Gearbest. No problem getting the Gateway to show up in Domoticz. I can mate the sensors to the Gateway in the iOS-app but they never show up in Domoticz, anyone know why?

[warmaniac]

Hi , I wrote it before, it is because xiaomi gateway didn't updating status of sensor throught wifi , we must wait for update of gateway

Hello

I got the new type of temperature/humidity sensor today from Gearbest. I can mate the sensors to the gateway but they never show up in Domoticz, anyone know why?

Odoslané z môjho iPhone cez Tapatalk

[theo69]

Hi there I have a aqara http://www.gearbest.com/access-control/pp_626696.htmlpush button. I am trying to configure it to use on/off. However it shows on but I can not switch it off if i press the button again, tried delay on button off button on/off button nothing is working

Is nobody using one of these wireless wall switches?

[NuNca]

Hi, first of all thank you corbin for all the work you've done. i've been using this some time now and it works perfectly.

today i received a new aqara doorsensor (wanted to test it) http://www.gearbest.com/access-control/pp_626703.html
it can be connected to the gateway using the Mi-app (iOS) and it shows up as a normal doorsensor with log and everything.
But it isn't shown in the Domoticz log.

When you use it (removing the magnet from the base and putting it back) there isn't a message in the Domoticz log, but when it's connected to the gateway and you press pair button on the doorsensor you will get a message in the Domoticz log:

Code: Select all

2017-06-07 22:33:38.235 XiaomiGateway: unhandled model:
2017-06-07 22:33:38.235 {"cmd":"heartbeat","model":"","sid":"158d0001a3e8f3","short_id":35014,"data":"{\"voltage\":3155}"}

when i look at the developers mode i can see the device as:

Code: Select all

{ Model: lumi.sensor_magnet.aq2,did: lumi.158d0001a3e8f3,name: Test } 

i don't know if it's possible to get this new doorsensor also added to Domoticz. Hopefully you can show your magic once again.
If you need anything else please let me know.

[warmaniac]

There is a problem with aqara ones devices because it not updating status via UDP from gateway, so it must be done from xiaomi , maybe after some firmware update, it can work correctly ,btw I try to watch it via wireshark but nothing shows at output from xiaomi gateway ,(have too door and temperature aqara devices) .

Hi, first of all thank you corbin for all the work you've done. i've been using this some time now and it works perfectly.

today i received a new aqara doorsensor (wanted to test it) http://www.gearbest.com/access-control/pp_626703.html
it can be connected to the gateway using the Mi-app (iOS) and it shows up as a normal doorsensor with log and everything.
But it isn't shown in the Domoticz log.

When you use it (removing the magnet from the base and putting it back) there isn't a message in the Domoticz log, but when it's connected to the gateway and you press pair button on the doorsensor you will get a message in the Domoticz log:

Code: Select all

2017-06-07 22:33:38.235 XiaomiGateway: unhandled model:
2017-06-07 22:33:38.235 {"cmd":"heartbeat","model":"","sid":"158d0001a3e8f3","short_id":35014,"data":"{\"voltage\":3155}"}

when i look at the developers mode i can see the device as:

Code: Select all

{ Model: lumi.sensor_magnet.aq2,did: lumi.158d0001a3e8f3,name: Test } 

i don't know if it's possible to get this new doorsensor also added to Domoticz. Hopefully you can show your magic once again.
If you need anything else please let me know.