Wireless RF Transceiver (Transmitter & Receiver)

[MYLE]

Find this on AliExpress

https://www.aliexpress.com/item/SV613-N ... 2151c9fbc0

Will Domoticz see it Im user Ubuntu

[i000]

Works with Domoticz?

[gerardvs]

In my opinion, most likely not. This is nothing more than a wireless serial extender. Effectively being a long copper wire pair.
Can be very useful but not as a standalone solution to connect to Domoticz.

[Stuntteam]

You can use RFlink with a ser2net solution to have a wireless RF Gateway..

[b_weijenberg]

Find this on AliExpress

https://www.aliexpress.com/item/SV613-N ... 2151c9fbc0

Will Domoticz see it Im user Ubuntu

This transceiver is not supported by Domoticz.
Note that 100mW (+20dBm) is not allowed to use in Europe at 433MHz. The maximum is 10mW ((+10dBm).

RF transceivers also supported by Domoticz are:
PiFace viewforum.php?f=27
And the USB or LAN RFXCOM (ser2net) RFXtrx433 and RFXtrx433E viewforum.php?f=44.
For the ser2net configuration see: viewtopic.php?f=28&t=192&p=65087&hilit=ser2net#p65087

[i000]

Find this on AliExpress

https://www.aliexpress.com/item/SV613-N ... 2151c9fbc0

Will Domoticz see it Im user Ubuntu

This transceiver is not supported by Domoticz.
Note that 100mW (+20dBm) is not allowed to use in Europe at 433MHz. The maximum is 10mW ((+10dBm).

RF transceivers also supported by Domoticz are:
PiFace viewforum.php?f=27
And the USB or LAN RFXCOM (ser2net) RFXtrx433 and RFXtrx433E viewforum.php?f=44.
For the ser2net configuration see: viewtopic.php?f=28&t=192&p=65087&hilit=ser2net#p65087

Great contribution!

[MYLE]

Thanks guys look like I have more reading to do by the way I'm from New Zealand

[MYLE]

You can use RFlink with a ser2net solution to have a wireless RF Gateway..

Thanks Been reading up on the RFLink i'm leaning down that road

starting to read up on the ser2net also

Just one Question I have some X10 motion 433MHz. I guesting the RFLink will pick them up

[Nautilus]

You can use RFlink with a ser2net solution to have a wireless RF Gateway..

Thanks Been reading up on the RFLink i'm leaning down that road

starting to read up on the ser2net also

Just one Question I have some X10 motion 433MHz. I guesting the RFLink will pick them up

http://www.nemcon.nl/blog2/devlist

If it is not on the supported devices list then it a) might work (using of the existing protocols) or b) could be added in some of the later releases. But there's no guarantee it works unless you find it on the supported devices list...

[Stuntteam]

X10 works fine.. If you find a device that has issues we will fix it.