I would like to be able to lock / unlock my sliding door using domoticz without modifications to the door on the outside.
Does anyone on this forum can give me a hint where to start ?
Domoticz controlled lock on sliding door possible ?
Moderators: leecollings, remb0
- waaren
- Posts: 6028
- Joined: Tuesday 03 January 2017 14:18
- Target OS: Linux
- Domoticz version: Beta
- Location: Netherlands
- Contact:
Domoticz controlled lock on sliding door possible ?
- Attachments
-
- IMG_20170216_100635_tn.jpg (3.64 KiB) Viewed 1259 times
-
- IMG_20170216_100601_tn.jpg (4.32 KiB) Viewed 1259 times
-
- IMG_20170216_100549_004_tn.jpg (4.17 KiB) Viewed 1259 times
Debian buster, bullseye on RPI-4, Intel NUC.
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
- emme
- Posts: 909
- Joined: Monday 27 June 2016 11:02
- Target OS: Raspberry Pi / ODroid
- Domoticz version: latest
- Location: Milano, Italy
- Contact:
Re: Domoticz controlled lock on sliding door possible ?
unless you're able to install an automatic doorlock (Zwave or other kind) I don't think you will be able to...
http://www.zwaveproducts.com/shop/z-wav ... door-locks
http://www.zwaveproducts.com/shop/z-wav ... door-locks
The most dangerous phrase in any language is:
"We always done this way"
"We always done this way"
-
- Posts: 115
- Joined: Sunday 11 January 2015 16:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Domoticz controlled lock on sliding door possible ?
Looks like the door has an euro cylinder. Have a look at Nuki.
Re: Domoticz controlled lock on sliding door possible ?
I agree with Emme on this one. I am not aware of any method you can use to achieve what you want out of the lock without making any modifications to the lock/door on the outside. I would strongly suggest upgrading it to a deadbolt lock which will then give you more options in terms of auto locks and smart locks which you can then modify to control using domoticzemme wrote:unless you're able to install an automatic doorlock (Zwave or other kind) I don't think you will be able to...
http://www.zwaveproducts.com/shop/z-wav ... door-locks
-
- Posts: 142
- Joined: Tuesday 24 January 2017 23:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8153
- Location: Australia
- Contact:
Re: Domoticz controlled lock on sliding door possible ?
the only thing at all i can think of would be to install a seperate lock beside it, inside....use a mag lock contact
that would still modify the door, but it would leave the normal door and lock intact if you needed to use it
that would still modify the door, but it would leave the normal door and lock intact if you needed to use it
V 2020.2 RPI 3
RFlink 334 mhz
mysensors
broadlink
Mirabella Genio Globes
RFlink 334 mhz
mysensors
broadlink
Mirabella Genio Globes
- waaren
- Posts: 6028
- Joined: Tuesday 03 January 2017 14:18
- Target OS: Linux
- Domoticz version: Beta
- Location: Netherlands
- Contact:
Re: Domoticz controlled lock on sliding door possible ?
Thx for the suggestions and tips. If I find a working solution for my situation I will post it here
Debian buster, bullseye on RPI-4, Intel NUC.
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
Who is online
Users browsing this forum: No registered users and 1 guest