NEW frontpage.html - request comments

[madrian]

Anybody to this?

I tried

Code: Select all

var d = (32/100)*level;

, but it does not work. The plus button decreases the value, not increases.

[G3rard]

@hpapagaj, that is strange. Can you post the complete function and the code with the dimmer part.

[madrian]

@G3rard I am using the stock frontpage.js.

In settings I have a standard level controller:

Code: Select all

['25',	'Level',		'cell2',	'Konyha LED','1','1'],

The relevant part from frontpage.js:

Code: Select all

//Dimmer, only works with 1-16 dimmer for now
function ChangeStatus(OpenDicht,level,idx,currentlevel)
	{
	//When switched off return to previous level, no matter if plus or min pressed
	if (level == txt_off) {
		if (currentlevel == 1) {
			currentlevel++;
		}
		//console.log("In uit",currentlevel);
		$.ajax({
		url: $.domoticzurl+"/json.htm?type=command&param=switchlight&idx=" + idx + "&switchcmd=Set Level&level=" + currentlevel,
		async: false,
		dataType: 'json',
		success: function(){
		console.log('SUCCES');
		},
		error: function(){
		console.log('ERROR');
		}
		});
	}
	else {
		level = level * 1;
		console.log(OpenDicht,level);
		if (OpenDicht == "plus")
			{
			var d = level * 3.125;
			
			console.log("in plus",d,level);
			if(d > 32) {
				d = 32;
			}
			$.ajax({
			url: $.domoticzurl+"/json.htm?type=command&param=switchlight&idx=" + idx + "&switchcmd=Set Level&level=" + d,
			async: false,
			dataType: 'json',
			success: function(){
			console.log('SUCCES');
			},
			error: function(){
			console.log('ERROR');
			}
			});
		}
		else {
			var d = Math.round((level / 100.0) * 32);
			console.log("in min",d,level);
			if( d < 0 ){
				d = 0;
			}
			$.ajax({
			url: $.domoticzurl+"/json.htm?type=command&param=switchlight&idx=" + idx + "&switchcmd=Set Level&level=" + d,
			async: false,
			dataType: 'json',
			success: function(){
			console.log('SUCCES');
			},
			error: function(){
			console.log('ERROR');
			}
			});
		}
	}
	RefreshData();
	}

+I added to this function::

Code: Select all

//Dimmer
	if(vtype == 'Level' && item.SwitchType == 'Dimmer') {

this code:

Code: Select all

} else if (item.MaxDimLevel == 32) {
						//vdata2 = vdimmervalue; //used for ChangeStatus
						//vdimmervalue = Math.round(vdimmervalue / 5)*5; //round to ten
						
						vdata = vdimmervalue; //show current dim value
						var hlp = '<span onclick="SwitchToggle('+item.idx+',\'Off\');lightbox_open(\'switch\', '+switch_off_timeout+', '+txt_switch_off+')"; style='+alarmcss+'>'+ vdata+'</span>';
						var plus = "<img src=icons/up.png align=right vspace=12 onclick=ChangeStatus('plus'," + vdata + "," + item.idx + ","+ vdimmercurrent+")>"; //align=right replaced by hspace and vspace
						var min = "<img src=icons/down.png align=left vspace=12 onclick=ChangeStatus('min'," + vdata + "," + item.idx + ","+ vdimmercurrent+")>" //align=left
					}	

In my opinion the bug is in the vdata = vdimmervalue; --> maybe here I am missing a formula or in the var d = level * 3.125;.

[BarryT]

Dear all,

With all the examples and code in this forum, I have managed to create a pretty good frontpage which runs on a wall mounted tablet.

Albert,
can you please upload your frontpage packet some wear in order to download it and take some sample please ?

Thanks in advance
Denis

+1
It isnt that simple as adding a couple tables?

Please explain how did you do this, looks nice!

[G3rard]

@hpapagaj,

Can you try this

Code: Select all

var d = ((level + 10)/100 * 32) +  0.5;

in stead of

Code: Select all

var d = level * 3.125;

What is the console showing then when you press plus, related to this part of your code?

Code: Select all

console.log("in plus",d,level);

Level = the old level
d = the new level

[ubfssF]

I am using the frontpage-version by Swordfish, which is based on the frontpage of this thread, just some tweaks to cell colors etc. What I cannot achieve is displaying travel times in the frontpage. When I browse the Domoticz database I can see the custom sensor (ID=181) and its value (sValue=12), but I cannot use the sValue. It just displays the Id-number. I can retrieve a few of the other fields of this custom sensor, like CustomImage.
Is there any way to retrieve and display in the Frontpage?
Inserting "Minuten"doesn't work as well:

Code: Select all

        ['181','Minuten',               'cell8',        'Alblasserdam-Gorinchem','1','0'],

See left under, nr 181

Spectacle.kn3558.png (44.54 KiB) Viewed 5755 times

Spectacle.db.png (121.32 KiB) Viewed 5755 times

[ubfssF]

To answer my own question...

I had to look up the available datafields, for example in: http://127.0.0.1:8080/json.htm?type=devices&plan=0
There it was clear that I needed the contents of "Data":

So the right line is:

Code: Select all

['181','Data',          'cell8',        'Alblasserdam-Gorinchem','1','0'],

[madrian]

@hpapagaj,

Can you try this

Code: Select all

var d = ((level + 10)/100 * 32) +  0.5;

Super it's working now. Thank you!

Little glitch that one step is 6% instead of 3% (like in Domoticz):

50 to 56:

plus 50
in plus 19.7 50
SUCCES

56 to 62:

plus 56
in plus 21.62 56
SUCCES

[EdwinK]

Can this be installed on a Synology NAS? Can't find any map in which Domoticz could be living.

[G3rard]

To install the frontpage on a Synology, enable Web station and put the frontpage in the web folder.

[EdwinK]

To install the frontpage on a Synology, enable Web station and put the frontpage in the web folder.

Just that easy? Thanks

[Trigun]

There is no other documentation, but let my try to help you.

You have to use the IP of your Sonos in the config.php, not the IP of the Pi.
Part of the config.php where 115 is the IDX in Domoticz.

Code: Select all

'zones' => array(
      '115'   => '192.168.1.161', /* kitchen*/
	),

The url you have to use in this example is:

Code: Select all

http://yourserver/tablet/sonos/index.php?zone=115&action=Play

And you have to run the PHP on a PHP enabled web server. So if that's not installed on your Pi, you have to install PHP on it.

Hi G3rard,
I was looking at this post and this is exactly what I would like to use.
I am able to control the sonos via HTTP but I can't get it to work with the PHP option in G3rards files.

perhaps you can help me out here?
maybe a noob question but how do I install the PHP server on the Domoticz Pi?

Thanks in advance!

Kind regards,

[EdwinK]

After reading through the 60 pages in this topic, I still not sure what is going on.

When I open the frontpage on my Synology NAS, the page loads, but then keeps trying to connect to some site, but I can't find out what. Because it does this, I also can't see if my changes work.

[Trigun]

After reading through the 60 pages in this topic, I still not sure what is going on.

When I open the frontpage on my Synology NAS, the page loads, but then keeps trying to connect to some site, but I can't find out what. Because it does this, I also can't see if my changes work.

did you make any configutations yet?
for example: put in your ip adress and use the right floorplan in the frontpage_settings file?

[ubfssF]

Floorplan 0 will do for starting. Later on, you can create one specially for the Frontpage.
IP address of the domoticz server has to be right.
If you have at least one sensor configured, you should see something.
Page loads slowly, but if configured right it should work.

[EdwinK]

Yes. I did It's just that the frontpage is trying to connect to a site. I think it might either be to Buienradar or the webcam.

[EdwinK]

Page loads slowly, but if configured right it should work.

Have been waiting for over an hour. Still no luck.

[ubfssF]

I suspect Buienradar also for the slow loading, but an hour is way too much. I have a Ubuntu setup, so I don't know the pitfalls of a Synology setup, but I suspect that Frontpage isn't able to reach the Domoticz server. The IP address or port number are the first to think of, but maybe with a Synology setup there are other challenges? The long loading times are not due to the Buienradar or things like that, I would say, but the Domoticz server.

[EdwinK]

Everything else on the Synology is working normally. I will go investigate it a bit more.


Found that somewhere something is calling to a local address (that I don't have). So now looking for where it exactly sits in the files.

[G3rard]

@EdJo66, you can check the Console tab in Chrome which you can open with F12.
Normally that would show the error including file and line which is causing that.