Domoboard - General Discussions

[lukev]

I'm a little step further on my diskstation. I fixed the python2.7 installation en installed all modules.

But when i try to execute the server.py script, I get an error:

Code: Select all

root@DiskStation:/opt/bin/domoboard# python server.py -c example.conf
Traceback (most recent call last):
  File "server.py", line 3, in <module>
    from flask import Flask, g, redirect, url_for, render_template, abort, request, session
ImportError: No module named flask

It seems the system thinks there is no flask installed.

So I try to install flask, but then I get the message it is allready installed:

Code: Select all

root@DiskStation:/opt/bin/domoboard# sudo easy_install flask
Searching for flask
Best match: Flask 0.12
Processing Flask-0.12-py2.7.egg
Flask 0.12 is already the active version in easy-install.pth
Installing flask script to /usr/bin

Using /usr/lib/python2.7/site-packages/Flask-0.12-py2.7.egg
Processing dependencies for flask
Finished processing dependencies for flask

Some ideas??

[Lars65]

I get this when I try to start :

[codeTraceback (most recent call last):
File "server.py", line 154, in <module>
api.checkDomoticzStatus(config)
File "/home/pi/domoboard/modules/api.py", line 127, in checkDomoticzStatus
for device in resultScene["result"]:
KeyError: 'result'
][/code]

[squandor]

I'm a little step further on my diskstation. I fixed the python2.7 installation en installed all modules.

But when i try to execute the server.py script, I get an error:

Code: Select all

root@DiskStation:/opt/bin/domoboard# python server.py -c example.conf
Traceback (most recent call last):
  File "server.py", line 3, in <module>
    from flask import Flask, g, redirect, url_for, render_template, abort, request, session
ImportError: No module named flask

It seems the system thinks there is no flask installed.

So I try to install flask, but then I get the message it is allready installed:

Code: Select all

root@DiskStation:/opt/bin/domoboard# sudo easy_install flask
Searching for flask
Best match: Flask 0.12
Processing Flask-0.12-py2.7.egg
Flask 0.12 is already the active version in easy-install.pth
Installing flask script to /usr/bin

Using /usr/lib/python2.7/site-packages/Flask-0.12-py2.7.egg
Processing dependencies for flask
Finished processing dependencies for flask

Some ideas??

what version do you get when you type

Code: Select all

python

?

[squandor]

I get this when I try to start :

[codeTraceback (most recent call last):
File "server.py", line 154, in <module>
api.checkDomoticzStatus(config)
File "/home/pi/domoboard/modules/api.py", line 127, in checkDomoticzStatus
for device in resultScene["result"]:
KeyError: 'result'
][/code]

thats a bug in the api. It is fixed but only on the developer branch. the master branch will be updated soon.

[Lars65]

Seems like scandinavian letters is not alod either, when I use swedish å,ä,ö, I get an error.

[wez3]

I get this when I try to start :

[codeTraceback (most recent call last):
File "server.py", line 154, in <module>
api.checkDomoticzStatus(config)
File "/home/pi/domoboard/modules/api.py", line 127, in checkDomoticzStatus
for device in resultScene["result"]:
KeyError: 'result'
][/code]

thats a bug in the api. It is fixed but only on the developer branch. the master branch will be updated soon.

This bug is now also fixed in master.

[felix63]

To have Domoboard run in the background every time you start up I use PM2. Based on the info from https://www.domoticz.com/wiki/NefitEasy the way to get this up an running is:

Install pm2 to control the service

Code: Select all

npm install pm2 -g
pm2 startup

Create start script

Code: Select all

touch domoboard_server.sh

Use your standard edit to add lines:

Code: Select all

#!/bin/bash
cd /home/pi/domoboard/
python server.py -c basic.conf >/dev/null

Where /home/pi/domoboard should be the directory where you've extracted domoboard and basic.conf should be the name of you configuration file. Save your file.

Code: Select all

chmod 755 domoboard_server.sh

Start script

Code: Select all

pm2 start /home/pi/domoboard_server.sh
pm2 save

Getting info
If you want to check use

Code: Select all

pm2 list

to retrieve id and use

Code: Select all

pm2 info {id}

to retrieve info about running process.

After updates to configuration

Code: Select all

pm2 restart {id}

or

Code: Select all

pm2 stop {id}
pm2 start {id}

[pepijn]

You can also use the generic systemd method.

Create a file /etc/systemd/system/domoboard.service
Don't forget to modify the location of the domoboard installation and config file to your needs.

Code: Select all

[Unit]
Description=Domoboard Domotica Dashboard

[Service]
ExecStart=/usr/bin/python /opt/domoboard/server.py -d -c /etc/domoboard/config.conf
WorkingDirectory=/opt/domoboard
User=root
Group=root
Restart=on-failure

[Install]
WantedBy=multi-user.target

Enable on boot:

Code: Select all

systemctl enable domoboard.service

Start:

Code: Select all

systemctl start domoboard

Stop:

Code: Select all

systemctl stop domoboard

Get the status:

Code: Select all

systemctl status domoboard

To view the logs:

Code: Select all

journalctl -f -u domoboard

[fransiefrans]

very nice dashboard!

I have Domoboard running and was trying to alter some idx and camera's but why can't I see what I've adjusted in de example.conf file?
I've restarted the server and still the old config opens.

Could it be you're cache? to make sure that domoboard uses you're config try to run it with

Code: Select all

sudo python server.py -c configfile.conf 

and for debugging purposes you could add the parameter -d

All of a sudden it works now with the adjusted config file.
How can I quickly try out the edited config file?

[squandor]

If you mean you're own adjustments of the config you can add the parameter -d to the command. It stands for debugging mode which means that it will restart the server if a file is changed

[wez3]

I'm a little step further on my diskstation. I fixed the python2.7 installation en installed all modules.

But when i try to execute the server.py script, I get an error:

Code: Select all

root@DiskStation:/opt/bin/domoboard# python server.py -c example.conf
Traceback (most recent call last):
  File "server.py", line 3, in <module>
    from flask import Flask, g, redirect, url_for, render_template, abort, request, session
ImportError: No module named flask

It seems the system thinks there is no flask installed.

So I try to install flask, but then I get the message it is allready installed:

Code: Select all

root@DiskStation:/opt/bin/domoboard# sudo easy_install flask
Searching for flask
Best match: Flask 0.12
Processing Flask-0.12-py2.7.egg
Flask 0.12 is already the active version in easy-install.pth
Installing flask script to /usr/bin

Using /usr/lib/python2.7/site-packages/Flask-0.12-py2.7.egg
Processing dependencies for flask
Finished processing dependencies for flask

Some ideas??

Could you try this, change in server.py the first line:
#!/usr/bin/env python

to
#!/usr/bin/python

Hope thats help, i've read something about it on the internet.

[fransiefrans]

If you mean you're own adjustments of the config you can add the parameter -d to the command. It stands for debugging mode which means that it will restart the server if a file is changed

Thanks!

[wizzard72]

This dashboard looks very very nice. I was waiting for something like this. So I started right away and experimented a lot.

Here are some screenshots.

domoboard-01.PNG (86.04 KiB) Viewed 3297 times

domoboard-02.PNG (80.85 KiB) Viewed 3297 times

I have a few suggestions:

• The dimmer slides suggests that the lamps are on. There is no difference between dimmers that are on or off.
• In the top bar it's possible to show the time. Also it would be nice to have the date and weekday, and the status of the security panel.
• Can we have a security panel for disarming/ arming?
• The bar charts shows the name the device has in Domoticz. Also the name is too long, perhaps we can put the text in an angle?
• The list in top_tiles, bar_charts, etc. is not sorted exactly like the config file.
• Can we configure more than 2 switches windows next to each other?

[tozzke]

Just started using this Dashboard, looks very promosing!
I have one suggestion / change for the device-type: "dimmer" it uses a value between 0-100. I have a KaKu dimmer, which accepts values between 0-16. Of course i can change the value that is set, but I think its better to add a another device-type and call it KaKu-dimmer or something like that. In that case you can use regular dimmers and KaKu-dimmers at the same time!

I think they listened to you but overdone it
I've got Philips Hue @ Domoticz with LivingWhite plugs and bulbs and when I get >16% @ slider, they are at full brightness.

Another issue I noticed...
What's the use of the username and password you have to configure in the .conf file?
I've made a test.conf in which I entered the login/password from a user in Domoticz who can only see, not switch and yet... @ Domoboard you can still switch devices :/

[Hilary999]

I would like to say that is an amazing board as a video animator at Whiteboard Animation Services – HelloAnimations, I also say that The venture was begun in light of the fact that the default Domoticz interface is not intended to be utilized as a real dashboard, for instance on a tablet which is mounted to the divider. Domoboard depends on Bootstrap which permits the dashboard to be responsive.

[Awst6000]

Hi,
I'm playing with the configuration of Domoboard and I wonder where is configured to call www.buienradar.nl when I add the following to the configurationfile:
~
[[display_components]]
components = buienradar
[[buienradar]]
~

Or formulated in another way. How can I add the following URLs?
http://cdn.knmi.nl/knmi/map/page/weer/a ... ratuur.png
http://cdn.knmi.nl/knmi/map/page/weer/a ... ratuur.png
http://cdn.knmi.nl/knmi/map/page/weer/a ... elheid.png
http://cdn.knmi.nl/knmi/map/page/weer/a ... /zicht.png

Txs

[wez3]

Hi,
I'm playing with the configuration of Domoboard and I wonder where is configured to call http://www.buienradar.nl when I add the following to the configurationfile:
~
[[display_components]]
components = buienradar
[[buienradar]]
~

Or formulated in another way. How can I add the following URLs?
http://cdn.knmi.nl/knmi/map/page/weer/a ... ratuur.png
http://cdn.knmi.nl/knmi/map/page/weer/a ... ratuur.png
http://cdn.knmi.nl/knmi/map/page/weer/a ... elheid.png
http://cdn.knmi.nl/knmi/map/page/weer/a ... /zicht.png

Txs

The buienradar HTML is located at: "templates/buienradar.html".

[woody4165]

Hi

I have an Energy monitor where I can get actual and daily consumption and a counter.
I I query with JSON the data I get is:

Code: Select all

{
   "ActTime" : 1483645232,
   "ServerTime" : "2017-01-05 20:40:32",
   "Sunrise" : "07:39",
   "Sunset" : "16:52",
   "result" : [
      {
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CounterToday" : "7.373 kWh",
         "CustomImage" : 0,
         "Data" : "426.882 kWh",
         "Description" : "",
         "Favorite" : 1,
         "HardwareID" : xx,
         "HardwareName" : "xxx",
         "HardwareType" : "RFLink Gateway USB",
         "HardwareTypeVal" : xx,
         "HaveTimeout" : false,
         "ID" : "0000008E",
         "LastUpdate" : "2017-01-05 20:39:34",
         "Name" : "Owl",
         "Notifications" : "false",
         "Options" : "",
         "PlanID" : "0",
         "PlanIDs" : [ 0 ],
         "Protected" : false,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "SubType" : "kWh",
         "SwitchTypeVal" : 0,
         "Timers" : "false",
         "Type" : "General",
         "TypeImg" : "current",
         "Unit" : 1,
         "Usage" : "418.0 Watt",
         "Used" : 1,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "xxx"
      }
   ],
   "status" : "OK",
   "title" : "Devices"
}

If I use in [power_usage] I get the value in Data, which is the overall value.
Is there any possibility to get the Usage and CounterToday fileds?

Another question is regarding the line_charts. I would like to use it with more than one temp value.
Is it possible to have more than one temp charts, not in the same charts, but in different ones.

I have a [[switches]] components in the dashboard, but in the web page section title I see the word "Schakelaars" even if I don't have this word in the conf file. Probably it's a small bug.

Thanks

[Awst6000]

The buienradar HTML is located at: "templates/buienradar.html".

Hi Wez3,
What is wise for me to do?
Create my own template with the 6 different 'Knmi actueel' pages or shall I wait until someone is so kind to create this template within Domoboard?

Other questions:
- Is it possible to get livestreams from my own cams or do I get a snapshot? (Elro C903IP and D-Link 932L cams)
- How can I implement traffic cams like these: http://webcam.mapgear.nl/deventer_hdunantlaan/
- Is it possible to add '112-meldingen'?
Txs.

[pepijn]

What is wise for me to do?
Create my own template with the 6 different 'Knmi actueel' pages or shall I wait until someone is so kind to create this template within Domoboard?

Feel free to build the template and share your work