Blockly examples

[four2six]

this should still work, if i understand your setup correctly

if 'skymningsrelä' = on and 'larmsensor 1' = on
set scene 'Larmsensor 1 av' = active
if 'skymningsrelä'' = off
set scene 'Larmsensor 1 av' = inactive

[tjabas]

Yes its correct, but it doesnt work.

i can still aktivate the trigger that aktivates the scene when skymningningsrelä is set to off.

is it possible to make a switch inactive?

[four2six]

i'm not sure anymore i really understood what you want to achieve.

i understood:
switch 'larm' ist activated by your burglar alarm.
the scene 'Larmsensor 1 av' is the scene you want to be able to activated manually with the switch 'Larmsensor 1', but only after sunset and before sunrise.
you have a dummy switch "skymningsrelä" with a timer that is turned off at sunset and turned on at sunrise.

is this correct?

what is the connection between 'larm' and the rest?

[tjabas]

The switch larm is irrelevant, its a fysical button that i press to turn on the burglar alarm in the house, these things dont have anything to do with Domoticz. The only connection between the burglar alarm and Domoticz is the larmsensor1 switch in Domoticz, the burglar alarm sends an on command to the larmsensor1 switch in Domoticz, but otherwise by your are right in the post above. I hope you undrerstand what i mean.

[edje1205]

Hello

I'm new here but after a week a junk for domoticz !

So easy but second part wont work
doorbell is pressed
after 5 seconds light goes on

if light is on
send sms with tekst

keep light on for x minutes (here 30 seconds)
send cam snapshot

all well but light keeps on and wont go off !

whats wrong ?

thnx in advance

[StanHD]

The nested "If" Blocks are a problem. Can you redo with a single "If" and multiple "Else-If" structure?
The blocks used for seconds and minutes should be integer not time. (6) seconds, not (06:00) seconds.

[bjacobse]

The nested "If" Blocks are a problem. Can you redo with a single "If" and multiple "Else-If" structure?
The blocks used for seconds and minutes should be integer not time. (6) seconds, not (06:00) seconds.

Yes I also have problems with nested if-else/if and have done as StanHD proposed with success, to avoid the nested, take a look at mine as proposal how you can do similar blockly

blockly_if_then.png (125.4 KiB) Viewed 2340 times

[edje1205]

The nested "If" Blocks are a problem. Can you redo with a single "If" and multiple "Else-If" structure?
The blocks used for seconds and minutes should be integer not time. (6) seconds, not (06:00) seconds.

Thanks for reply Stan !
Now I have this (see att) :

Script: light goes on immediatly ( not after 10 seconds) and I want a relais of 10 sec
sms has send
camera snapshot has send
light goes off after 1 minute

The starting if (when light = on) is that correct ? if I do when light = off nothing happened; same for all statements so on is logic (?)
but not logic is: when light = on, set light on after 10 seconds (because it's already on). Or what ?


Wait ! I´m struggling with the ´else if´ uhhh


grtz

[StanHD]

Yes you still have nested "If"s, try doing as @bjacobse above. A single "If" with multiple "Else if".

[tjabas]

Good morning!

im trying to get some lamps not to turn on during sunrise, yeat active during sunset.
please take a look at this blockly, i cant get it to work.

[img]

kodi.PNG (18.21 KiB) Viewed 2274 times

[/img]

[cyberclwn]

Hi,

I think the main issue here is that "Sunset" is a time. let's say it's "16:27".
So only when you have Kodi paused at 16:27, it will trigger.
Probably you mean "time > sunset" (after sunset)

Also the if looks a bit strange to me.

Code: Select all

If "kodi = ( paused and (time = 16:27 ) ) then ... 

look at the previous post of bjacobse to see the difference in the "if" statement.

[tjabas]

yes i mean after sunset so the > should be pointing towards the sunset block?

otherwise, did the setup seem to be working?

[StanHD]

Try:- (Kodi=paused) and (Time = sunset)
not (Kodi=(paused and Time = sunset)

Sometimes setting the options on the "and" block to external inputs makes the logic easier to see / understand.

[edje1205]

Yes you still have nested "If"s, try doing as @bjacobse above. A single "If" with multiple "Else if".

Thanks StanH and of course bjacobse (ignored your suggestion )

This is working !
Easy and what I wanted !

I will read other blockly's (blocklies) to learn later.

Now time for shopping; the wife is waiting

[StanHD]

[tjabas]

Try:- (Kodi=paused) and (Time = sunset)
not (Kodi=(paused and Time = sunset)

Sometimes setting the options on the "and" block to external inputs makes the logic easier to see / understand.

thanks for your answer, it didnt work, i cant really tell why, i also have a dummy switch that turns on after sunset and of when sun rises.
i aslo replaced sunset timer with the dummy switch, but neither that one worked.

Is there anyone what would like to make a example blockly of how this would look like?

thank you.

[StanHD]

Similar to this is worth a try:-

[tjabas]

Similar to this is worth a try:-

thanks

but i dont really know how i would get that big (and) block right beside the (if do) block.
cant find it anywhere.

[StanHD]

Right click the "and" block and select external inputs.

Sent from my SM-G925F using Tapatalk

[tjabas]

Yes you still have nested "If"s, try doing as @bjacobse above. A single "If" with multiple "Else if".

thank you