Basic OpenZwave Question

Cannon · Post by **Cannon** » Monday 21 November 2016 8:32

Hi

Im running windows 10 with the latest stable version of domoticz,

What am i doing wrong to not see my Gen5 aeon labs stick in the open zwave control panel. ?

Thanks

Egregius · Post by **Egregius** » Monday 21 November 2016 8:40

You see the stick in Domoticz -> Hardware?
You open OZWCP from Domoticz -> Hardware -> Openzwave? Or directly from a bookmark?

Cannon · Post by **Cannon** » Monday 21 November 2016 9:02

Hi

Thanks for your reply,

Yes I see the stick in domoticz, I have about 4 lights 3 sensors, weather underground set up, all operating for about a year, but nothing in my OZWCP, i go through the menus,
Set up
Hardware
Zwave Stick Setup
Node Management
Control Panel

To get to it.

Is that correct?

Egregius · Post by **Egregius** » Monday 21 November 2016 9:05

Yes, that's the way to go to it.
You can't open it directly from bookmark, something with session or authentication.

Then, once in OZWCP the screen is empty? Can you post a screenshot?

Cannon · Post by **Cannon** » Monday 21 November 2016 9:33

: Capturezwave.PNG (102.31 KiB) Viewed 4340 times

Egregius · Post by **Egregius** » Monday 21 November 2016 9:52

Can you try this?

First open this url: (change the idx to the idx of your zwave stick)
"http://127.0.0.1:8080/json.htm?type=ope ... odes&idx=3"

then open ozwcp on "http://192.168.2.10:8080/ozwcp/cp.html"

Why? I sent commands from CLI directly to ozwcp. If I don't open the first url I don't get a response.

Cannon · Post by **Cannon** » Monday 21 November 2016 9:57

yup got the first one to open ok,

the second timed out though

Egregius · Post by **Egregius** » Monday 21 November 2016 10:12

Oh, I forgot to change the IP address of the second one:
"http://192.168.2.10:8080/ozwcp/cp.html" to "http://127.0.0.1:8080/ozwcp/cp.html"

Also: do it in the same browser without closing it.

Cannon · Post by **Cannon** » Monday 21 November 2016 11:06

Yes I figured that bit out after awhile

but still a blank control panel as in the screenshot

benotje · Post by **benotje** » Monday 21 November 2016 11:16

Can you post a screenshot from the domoticz hardware ??

Cannon · Post by **Cannon** » Monday 21 November 2016 19:03

: hardwarecapture.PNG (390.59 KiB) Viewed 4248 times

Domosapiens · Post by **Domosapiens** » Monday 21 November 2016 21:05

Check the permissions of the Domoticz directory.
I vaguely remember that I had an equal problem some time ago after a Windows7 update

Cannon · Post by **Cannon** » Wednesday 23 November 2016 3:57

Thanks for your reply

I checked and everbody has full control over the entire folder, I also tried changing the contents and taking off read only...

Cannon · Post by **Cannon** » Monday 12 December 2016 7:42

Anyone???

Domosapiens · Post by **Domosapiens** » Monday 12 December 2016 12:35

Double check the ozwcp sub-folder on permissions?
Do you have a ozwcp.poll.XXXXXX.xml file in the Domotics folder?
OZW_Log.txt in the Config folder?
Run Domoticz as Administrator?
(just guessing, I have no Win10)

Gravityz · Post by **Gravityz** » Sunday 18 December 2016 13:39

anybody solved this.

i have similar problems that 2 devices are not visible in openzwave control panel

is there a way to force ozwcp.poll.XXXXXX to be updated.
This file seems to hold al modules and connections but no idea what is generating this file.

Egregius · Post by **Egregius** » Sunday 18 December 2016 13:53

Owzcp creates and updates it.
Think you may even delete it, it will be created again when opening ozwcp.

Gravityz · Post by **Gravityz** » Sunday 18 December 2016 14:51

tried it.
when i delete the file it is not recreated when i open open zwave control panel

what is really weird is that everything works perfectly with good networking coverage.
the modules show up in the statistics section but not in de devices section of open zwave control panel.

Egregius · Post by **Egregius** » Sunday 18 December 2016 15:17

Why make a problem of it then? If everything works... Most of the stuff you can do in OZWCP is also in Domoticz available.

Gravityz · Post by **Gravityz** » Sunday 18 December 2016 16:09

you are partly right.
indeed everything is working but sometimes when a certain module does not have a connection with it's neighbor(after reboot or stopping/starting aeonstick) i would like to go to that module and choose"update neighbors"

since 2 modules do not show up i can not force this on those modules

Basic OpenZwave Question

Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Re: Basic OpenZwave Question

Who is online