Hi, Installed the latest version of Domoticz for Windows on Windows Server 2019. Tried installing as a service, that one is giving a failure when starting as a service. When installing as a program I get the following errors after starting the program: "cannot find vcruntime140.dll" and after that ...

Version: V3.5877 Platform: Debian Plugin/Hardware: RaPi3, Z-wave stick gen5 Description: Switch sometimes not working On my system I have 5 switches working. One of the switches is not working fine. The 'on' command is working fine, the 'off' command sometimes is working fine and sometimes not. When ...

OK Egreius, thank for your reply. Tried the step-by step manual by Aotec like shown below. All light responses react like they should do. But still, after pluging the stick back in the rapi there is no change in Domoticz after a refresh... Any ideas? ---------------------------- First Do an ...

Hi, Tried including a Qubino (flush 2 relays) to a Z-Stick Gen 5. Tried it manual by removing the Z-Stick from my Rapi3. After pressing the button on the Qubino the Z-stick confirms with quick blinking and after that a steady light for a while. Then I shut down the Z-stick an plug it in to the Rapi ...

Hi, installed SBFspot next to mij Domoticz installation (RPI 1). All went fine following the exact instruction of https://www.domoticz.com/wiki/SMASpot_Monitoring_in_Domoticz. After giving the command sudo make install_sqlite a problem rizes: I got the response: make: *** No rule to make target ...

And where is the "solved" button?

Yeah! That was the solution. Thanks!

Hm, thanks for your reply. I read that it is possible to fill in a wrong location and that it will generate a failure message in the log. Tried you suggestion though, and the effect in my Domoticz is the same: it will not store the new hardware...

Hi, tried to add Weather Underground to my Hardware in Domoticz V3.4834 (latest stable at this moment). Read the documentation over and over again, regenerated another API, tried another weather station but I can't figure out what is going wrong. After pushing the Add button the page refreshes and ...

Problem in the latest version (0.1.253) with a blinds switch. Performs fine in Domoticz, but in the app there's no response on switching on or off. However, when I change the settings for switch in the settings menu, I can control my blinds. However the graphics from the blinds switch don't alter no ...

About Icon missing, but very nice icons!

Fixed my startup problem after reboot! I had to modify the /etc/init.d/pm2-init.sh file export PM2_HOME="/root/.pm2" altered to: export PM2_HOME="/home/pi/.pm2" Hm, cleared the logs for nefit easy server as shown above. This because there is no date and time stamp there with them. Then did a sudo ...

Hm, cleared the logs for nefit easy server as shown above. This because there is no date and time stamp there with them. Then did a sudo reboot and found in the pm2 log that the starting of the nefit server is not executed at all, and a new error log is not created. So nothing is going wrong I think ...

Yeah Holland, that's the same over here for what I can see. The only thing that is different is the server line. Are you running something else that is important for my situation? ┌─────────────────────┬────┬──────┬─────┬────────┬─────────┬────────┬─────────── ─┬──────────┐ │ App name │ id │ mode │ p ...

Could not imagine me creating the file in Windows, but to be sure I recreated the file. Same problems though. Any ideas? Indeed, I would think that nefiteasyhttpserver.sh is created in a windows tekst editor. Recreate the file with nano, and copy past the 2 lines: sudo nano nefiteasyhttpserver.sh

Hi Holland, Many thanks for your reaction. Brings me no luck though. Tried these setting before you wrote this supply and tried it again but no auto startup from the nefit server after sudo reboot. All the steps finally give a positive feedback. Took a look in the pm2 logs and there are some errors ...

Hm, small problem here. Running easy server with "pm2 start nefiteasyhttpserver.sh" is going fine. Then ran "sudo pm2 startup" and "sudo pm2 save", all with positive feedback. But after "sudo reboot" no auto reboot from the nefit easy server. Looked in etc/init.d/pm2-init.sh and found nothing about ...

Trying to send a notification with events and blockly as: if cv-pressure is smaller than 1 then send message. Get a errot message in the Domoticz log like: 2016-03-20 13:57:04.160 Error: EventSystem: Lua script error (Blockly), Name: Druk_1 => [string "result = 0; weekday = os.date('*t')['wday ...

Thanks to you all.

The PM2 settings are working, very happy!

Hi,

my PI Zero working fine when manually starting up the easy-server. Trying to make a PM2 autostart but I get this when I following the instructions.

Any ideas?

pi@raspberrypi:~ $ pm2 start nefiteasyhttpserver.sh
[PM2][ERROR] script not found : /home/pi/nefiteasyhttpserver.sh