In the "STA Setting" mode.
You have "Obtain an IP address automaticly set to "Enable", change this to "Disable" and give the bridge a correct ip/subnet.

Settings on your wifibridge

Can you show me your settings before it occurs and after?

Did it accidently change from "STA" mode to "AP" mode? No. I double checked all settings. Now I tried changing ip in router roules, milight box settings and domoticz. It's working now, see how long it last Inviato dal mio SM-G950F utilizzando Tapatalk Why would you change the ip rules? Normally ...

Did it accidently change from "STA" mode to "AP" mode?

Can you try to connect to the bridge directly when the problem occurs?

Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

seems like an IP problem on first sight. Check if the bridge still has the same ip. or give it a static one.

I'm currently working with Domoticz Version "V3.7320".
It doesn't seem that changing the ip to the broadcast seems to work...

It seems that the UDP data is totally diffrent then the one that I find on the interwebs. It'll take some time for me to figure out what the difference are with the FUT038, Its been a while that I've used wireshark (and I still need to learn the ways how "Mi-light" transfers it data. I'll keep you ...

Attachment 1 is one of the Four zones In have. Attachment 2 is the bridge.

Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

Attachment 1:
Is the UDP "Data" that my cellphone send towards the "ipbox" via the broadcast address.

I'm going to take pictures of the hardware I bought.

After sniffing my network yesterday. (With wireshark) I've noticed that the app of "Mi-Light" send everything towards the broadcast address. I'll try to compare the commands (or add some screenshots of them) I'm having a busy day today, so I have no idea when I'm going to post these images your ...

To rule out anything Domoticz specific maybe try one of the other scripts for controlling MiLights, e.g. https://github.com/LumKitty/MiLight3 or https://github.com/mwittig/node-milight-promise/. I guess the best source for api stuff is still http://www.limitlessled.com/dev/ where you'll find all ...

Cannot remember any more what the default "work mode" is. But unless it is changed automatically when connecting to local network via the app for the first time, I don't think I've touched that either. The mode is "STA mode" in my bridge. Default "work mode" is set to "AP", changed it to: "STA ...

If they are newly bought, then they should work with both modes. Mode is selected in the app by selecting the remote type and if you use the first remote in the list (with saturation and color temperature control) then your receivers are linked to RGBWW. If you changed the remote to the one that ...

Ok, seems it is correct then. Did you change the "server address" (IP) under "other settings" to have it same as also the real IP of the bridge? Not sure if this could have something to do with the issues. Using iBox 2 (a variant of the V6 bridge without the built-in light) is not a problem, I have ...

Hello guys, This is a copy/paste from my domoticz log. 2017-04-08 15:37:11.614 AppLamp: Worker stopped... 2017-04-08 15:37:11.615 AppLamp: Worker Started... 2017-04-08 15:37:12.754 AppLamp: Bridge found!... 2017-04-08 15:37:29.388 User: Admin initiated a switch command (1/AppLamp All/On) 2017-04-08 ...

I can send UDP packages but my domoticz isn't able to turn on the lights. (all or a single zone...)

I did some investigation with my pi, started some netcat port scanning.

screenshot below.

Any help would be appreciated.


Seems like it does listen on port 5987 over here.

I've forgot to add the -u flag. Now I did and it seem to have a connection.

Bumping this thread, it doesn't seem to change anything if I change the ports....
Its still not working...