smaus wrote:There is a possibillity to add a Enphase hardware item in Dotmoticz, what remote address and port number do i fill in?

enphase1.jpg

Mine is connected to my local lan.

wifiminime wrote:Hi,

Is there a place/site where i can buy the Zigbee2MQTT hardware (CC2531 USB sniffer) that has already been programmed?

I have the programmer so can help you when you order a sniffer!


Verzonden vanaf mijn iPhone met Tapatalk

I have a duco remote (modified Itho version) with CC1020 chip (OOK, FSK en GFSK modulation) and 3.6864 oscillator.

Would RFlink be able to pickup the signal?

I have got the script working. pi@RPi-Smartmeter:~ $ sudo python3 smartmeter/smartmeter.py Reading previous data [b]1810154458650 1820169679580[/b] Closing serial port Opening COM port at initial baudrate Initialize Initialized /LGZ5ZCF100AC.M40 Waiting for data ^CTraceback (most recent call last ...

Check https://www.domoticz.com/forum/viewtopic.php?f=31&t=5390 and https://www.domoticz.com/forum/viewtopic.php?f=14&t=5270 Thanks! I will give it a try . I give up and wait for support within Domoticz :oops: . Too much noob for this. Finally allmost got it working. Babysteps! @Jossie67 thanks!

I have used the script by Jossie67 and get the following error. Traceback (most recent call last): File "/usr/lib/python3/dist-packages/serial/serialposix.py", line 490, in read 'device reports readiness to read but returned no data ' serial.serialutil.SerialException: device reports readiness to ...

I am trying to figure how to add devices. Does anyone have a step by step tutorial?

Old version of my blocky scripts keep running. 2018-09-02 06:38:33.281 EventSystem: Event triggered: NEST Control_1 2018-09-02 06:38:33.283 EventSystem: Event triggered: NEST Control_2 Any one an idea how to delete old versions? I am running domoticz on a raspberry pi Version: 4.9971 Platform ...

I had the same trouble. My devices were located in the shed. Bad respons although the WiFi couverage was reasonable. I have changed the esp easy into ESPurna and added an extra outdoor access point for the devices in the shed. It works flawless at the moment.

SweetPants wrote: yup, running since jun 11 and never missed a local or MQTT switch up till now. Have 2 running, working on a third, waiting for some components.

Can it also be installed behind a light switch? Dutch version ‘inbouwdoos’?

Got my CC2531 & CC Debugger, programmed the CC2531, installed the bridge, connect to the domoticz MQTT and it runs but now what to do?!

Anyone a idea how get rid of the Lijn null?

first of all nice work! I am trying to add the trash calendar. There are two but only one is shown. Any idea? :roll: var calendars = {} calendars.trash = { maxitems: 5, icalurl: 'https://calendar.google.com/calendar/ical/8r0tm9d1kkm34bfdemq1dg53h53h1tco%40import.calendar.google.com/public/basic.ics ...

There is an easy solution. I have added an extra line to set deurbell off after 2 seconds.

Great work! I am trying to get it start on boot but cannot get it working. Any advice?

Btje wrote:I would like to add Wind speed, direction and lux to and in the future maybe rain.

Which sensors for wind speed and direction do you have in mind?

I have the same! My Byron SX doorbell is detected by RFXCOM but it detects two and three devices: Test1 499 RFXCOM 03E1 142 Unknown Chime SelectPlus On 5 2017-08-26 10:20:34 502 RFXCOM 03F0 244 Unknown Chime SelectPlus On 5 2017-08-26 10:20:33 503 RFXCOM 0361 14 Unknown Chime SelectPlus On 5 2017-08 ...

gohan wrote:Are you using the normal sonoff switch or do you have the POW version ?

I am using the POW version.


Verzonden vanaf mijn iPhone met Tapatalk

I have installed MQTT on my RPI (following all these steps https://www.domoticz.com/wiki/MQTT). Add all account settings to ESPunra and it works.


Verzonden vanaf mijn iPhone met Tapatalk

@Bouncemeister. Now nothing wants to connect to the Wifi AP of the Sonoff Dual with ESPurna anymore -> You may need to detail what you mean by that...In any case to connect to it and test it I would recommend to run it on 230V as powering it by a USBtoSerial will not provide enough power (think it ...