Just for the record - issue persists also with 5.309.

Thanks for the feedback. I ordered one now, should be in next week. I am also using the Z4D plugin so hope to connect it quickly. Do you also get devices for light intensity (lux)?


Hi, it just has an On/Off switch. It does not have a lux meter - probably it can report voltage.

(this is the dev ...

I know I'm getting annoying...

Conf/Local-Devices folder is empty. There are no devices paired with that coordinator (it is just for tests).

I tried 4 times to add that exact extender after updating devices DB to 5.307 (restarted Domoticz twice during the tests) and I'm getting the same old ...

Hello,

I had no issues pairing it with my test and "prod" envs. - both RPI 3B+ with Sonoff ZBDongle-P and latest Z4D.
I have a second such sensor which I tested yesterday - again no issues with the pairing.
Probably you had bad luck with that exact sensor

Thank you a lot - I can confirm that extender can be added (although it creates a Domoticz water leak device :) )

Del. Optimized Parameters b10a 28dba7fffe611013 TS0207-extender Z4D - TS0207-waterleak_Water-28dba7fffe611013-01

The two new extenders cannot be added however but there might be ...

I'm wasting your time with my problem, I have to say "sorry" :)

Pulled again and now I have the symptoms of the brand new extenders (just a Unexpected error in Domoticz) and here's the log (there are two warning in the end of the log):


2024-09-03 09:45:18,355 INFO :b'Z4D opened the Zigbee ...

Hello,

I have the same Zigbee sensor (a flower shaped one). It is connected to Domoticz via Z4D and it is detected as a leak sensor (basically it is). I have it for two weeks and it seems to be working fine - sets to On if there is a drop(s) on it, when gone - sets to off. The solar charging also ...

Did it and I'm attaching the JSON error.


root@rasptest:/home/gd/domoticz/plugins/Domoticz-Zigbee# git pull
remote: Enumerating objects: 10, done.
remote: Counting objects: 100% (10/10), done.
remote: Compressing objects: 100% (5/5), done.
remote: Total 10 (delta 5), reused 10 (delta 5), pack ...

This is the JSON from the WEB UI


0:
0:
Time: "02/09/2024 22:42:59"
PermitToJoin:
Duration: 0
Starttime: 1725306212
PluginHealth: "Enrollment in Progress"
Thread: "ZigpyForwarder_17 6405"
nwkid: "None"
Module: "Pairing"
message: "kindly report this error'in <string>' requires string as left ...

I deleted the plugin folder on the test env and cloned in again from GitHub. Started a brand new network and tried to add the first problematic extender (I have 2 of that same kind working in the prod setup). Here is the log with pairing and zclClusters enabled:


2024-09-02 22:25:14,270 INFO :b ...

Hello,

Here's the log with the enabled parameters - adding one of the brand new extenders.


2024-09-02 17:16:57,097 INFO :b'Z4D opened the Zigbee network for 240 seconds '
2024-09-02 17:16:57,131 INFO :b'++ opening zigbee network for 240 secondes on specific router None'
2024-09-02 17:16:57,175 ...

Hello,

I'm using Z4D for the last 2+ years and I'm very happy with its functionality. Since yesterday I'm having and issue with adding a new Zigbee extender and I'm looking for some help.

I have a prod and dev env. both running on Raspi 3B+ with SonOff Zigbee 3.0 USB Dongle plus on latest Domoticz ...

You're great! It works now! Thank you a lot!

Hello,

I have three such blind motors - https://moeshouse.com/products/zigbee-chain-motorized-blinds-motor.
I've added them to Domoticz-Zigbee and control them via Domoticz - no issues with them.

Recently I bough three additional ones - same model, same seller. There is no difference in the models ...

Thank you for the quick reply!
Have a nice weekend and cheers!

Hello,

I'm using ZigBeeForDomoticz on a Raspberry 3B+ with a Sonoff Zigbee 3.0 USB Dongle Plus.

I was using version 7.1.003 of the plugin without any errors.

Two hours ago I saw that there is a new release from today and decided to update the plugin.
Update was successful (stopped Domoticz ...

After starting Domoticz manually with all debug and logging flags set I got the error:

[686f3200] Error: Tuya2: AttributeError: module 'lib' has no attribute 'X509_V_FLAG_CB_ISSUER_CHECK'

Now I'm fighting with cryptography and pyOpenSSL packages.

Update:
Issue is resolved. According to the ...

Yes, it should generate more logs. That's the strange part - no additional messages, no errors, no devices added. Like it somehow stops/hangs. I know it is not a common issue and it is hard for investigation with that lack of info.

Hello,

I was using the plugin (Domoticz-TUYA) on a Raspberry Pi for some time and it was working fine. Recently I got a strange issue with it - when I add/update it in Domoticz in the logs I can only see and nothing more logged for that Hardware:
Tuya2: Worker thread started.
Hardware is named ...