Not me at all.

I've written a python script that now does it for me, reads the sensor and then sets the valve to open or closed. Shame about the constant beeps however,

So far, I've been thinking it's not me

I can set the valves to temperatures in the webinterface, but not in any ways in the scripts.

About Domoticz
Version: 2.4692
Build Hash: f42a1df
Compile Date: 2016-02-21 14:33:51

But, now Blocky scripts don't work at all Also, I can't set my SmartWares radiators to a temp, the devices don't show up. I can do it manually via the webinterface, but not via scripts.

Upgrading worked. Scripts run.

About Domoticz
Version: 2.3029
Build Hash: 3b588dd
Compile Date: 2015-09-15 13:32:45

I'll try upgrading next.

NickHead, I found the setting, it was not disabled, blocky scripts are working btw. I tried the old standby of turning it off and on again, and this showed up in the log; 2016-02-21 17:52:27.160 EventSystem: Stopped... 2016-02-21 17:52:27.168 Active notification subsystems: (0/8) 2016-02-21 17:52:33 ...

Nope. Nothing. The scripts don't seem to get executed at all.

What permission should they have? I'll try chmod'ing them to 777 to try just in case.

Trying that now. I'd be happy if even the log line appears

Yes. Same place as the demo scripts were.

I am trying to make a few simple lua scripts, but so far, I can't even get the simplest to run. I've followed the instructions of renaming the demo scripts, but they never ever seem to trigger. cat script_time_test.lua print('this will end up in the domoticz log') and cat script_device_light.lua ...

I am reposting this here, since in the original post, no comments were made after a few days, perhaps that was in the wrong spot; My Smartwares radiator valves that I am using, don't show up in blocky. I mean, they are listed, but only as switches or utility, and in an event they do not update. So ...

I've been using them for quite a bit now, I've not been able to turn them all the way off using Domoticz. Also, I can't seem to use them in events. Made a post about that as well, as I might be a dufus and it could be my own fault. Battery life seems good, I replace them once winter starts and use ...

Before I make this a bug report, I'd thought I'd check. My Smartwares radiator valves that I am using quite easily, don't show up in blocky. I mean, they are listed, but only as switches or utility, and in an event they do not update. So, I have this very simple event; event.png But although it ...

Recently tried the app, but at this point it is not working for me, this is because of one thing, SmartWares radiator valves. I've installed SmartWare valves throughout my house, in Domoticz they show as both a switch and a utility. In the web interface I can set the valves to any temperature, but ...

Recently tried the app, but at this point it is not working for me, this is because of one thing, SmartWares radiator valves. I've installed SmartWare valves throughout my house, in Domoticz they show as both a switch and a utility. In the web interface I can set the valves to any temperature, but ...

It's been a while, and I just found the set of sensors in the bottom of a box again. Anyone have any luck with these? Since they seem to be the standard kind that I can get on the various Chinese sites, it seems that have become more common. Didn't work out of the box with the 248 FirmWare for me ...

We can hope. But the RFX developer told me he is quite busy atm.

It works nicely. Dunno about the battery life yet, but I did order 2 more for a total of 5 now.

Unfortunatly, it was not a succes. I know to little of these thing to figure out the protocol. They are gathering dust now.

Found it.

Push Menu till it goes to "Pro"
Use wheel toe select "Rfs"
Use Domoticz to manually add a switch, choose an Id and choose test within 30 seconds.