If you want to stick with OZW for now, maybe try to work with persistant USB devices (it is described in the Wiki).

Sorry, my first reply was wrong. This is correct now:
I remember that I had an issue with my old z-Wave USB device when migrating from PI3B to PI4. I was using an AEON Labs ZW090 Z‐Stick Gen5 USB Controller. The ZW090 did only sometimes show up in the operating system and was not useable.
This PI4 ...

Hi,
I was finally able to migrate zigbee2mqtt to the current version 2.1.3
It now runs without any problem in my small Domoticz environment. :)

Changes needed were:
1)
Change the Auto Discovery Prefix to a different value as the prefix topic in the MQTT Client Gateway with LAN interface.
This was ...

Hi,
defining a "MQTT Client Gateway with LAN interface" is not enough, you also need a "MQTT Auto Discover Client Gateway with LAN interface"
Make sure to create in Domoticz hardware a "MQTT Auto Discover Client Gateway with LAN interface" wich has a discovery topic that ist different from your ...

Some time ago I tried to go from Zigbee2MQTT version 1.30.2 to version 1.41.0 without changing the working setup.

Docker container then keeps restarting with version 1.41.0 and also older versions (e.g. 1.36). No output in log.

Starting it with docker run ... shows following output:
docker run ...

Hello,

I just upgraded my installation to the Domoticz 2024.4 (coming from 2023.2) and also the newest images of zwave-js-ui and koenkk/zigbee2mqtt

Now I see that additional devices appear that e.g. get a name like "nodeID_8 (nodeID_8_config_switch_4)..." or "nodeID_5 (nodeID_5_config_switch_102 ...

Hi,
looks like problem from topic viewtopic.php?p=301917
For the install you probably will have to make sure that your VM is strictly 32bit
Cheers
Al

It also should work with other mail providers. Did you play with the email setting "Send Camera Snapshots as attachment (Gmail)"?
See also
https://www.domoticz.com/forum/viewtopic.php?p=287307#p287307

I did some tests and turning off the setting "Send Camera Snapshots as attachment (Gmail)" just ...

What if you do
http://domoticz-ip:8080/json.htm?type=command&param=emailcamerasnapshot&camidx=1&subject=test
Change camidx to the correct one.

Hi Walter,

thanks for your patience.

IDX is shown as 1 in my case. Entering the command in the browser gave the following result in the browser ...

I see from your signature that you run Domoticz on synology (in Docker?).
So could be an Docker access issue. Or try the snapshot link within the Docker container.

Sorry, my profile was not current. Domoticz is not on Synology any more.
I run Domoticz 2022.2 on Raspberry Pi 3B with Bullseye ...

Hello waltervl,

yes, I can send emails, but I use another mail service (I put in gmail.com just to make it anonymous).

Apart from Domoticz I had my troubles setting up the camera to send me emails directly (which I only got to work with Gmail app password because the camera's hardware certificate ...

Hello,

I am currently trying to integrate an old Foscam C1 Lite into Domoticz.
I added it int cameras and when I click onto the photo camara icon a snapshot gets downloaded to my PC download folder.
When I click onto the video camera icon I the video output of the camera is getting displayed in a ...

Difficult to tell the cause.

Here just two hints:
First test the connection between MQTT and Domoticz e.g. by creatung an Dummy Temperature sensor, note the IDX it got (e.g. 112) and enter
mosquitto_pub -h localhost -m '{ "idx" : 112, "nvalue" : 0, "svalue" : "25.0" }' -t ' domoticz/in '
in the ...

Hi,
upgraded from 2020.1 to 2020.2 beta on DS414j (comcerto).
Upgrade was no problem.
Domoticz works like before (minor problems with a Devolo device).
Thanks for providing the update!
Best regards
Al

Hi,
I am not sure if the following information is related to your question, but I noticed since Domoticz 2020.1 I see an additional item in the devices for the Eurotronics:
Idx Hardware ID Unit Name Type SubType Data
77 z-Wave Stick 0901 1 WZ-Thermo01_effTemperatur Temp LaCrosse TX3 21.4 C

This ...

Hi,

meanwhile upgraded to 2020.2 beta on a Synology DS and also tried 2020.2 stable on a Raspberry Pi3+ in another location and still getting the same errors.

Here are the data from the 2020.2 beta installation:

server hardware: Synology DS414j
server OS: DSM 6.2 (current)
Domoticz version ...

Unfortunatly i removed my z-wave stick from the hardware excedently and all my z-wave devices are gone :( .
Since there is a new update perhaps a good time to install 2020.1 right?
But what is/are the 'critical bug(s)' that are fixed in 2020.2 exactly and what could be the problems if i install ...

I recently stumbled over the information that it is possible to add/define uservariables with a JSON e.g.:
http://192.168.0.10:8080/json.htm?type=command&param=adduservariable&vname=Uvarname&vtype=Uvartype&vvalue=Uvarvalue
and that it is also possible to dump all the uservariables with a JSON e.g ...

Hello jumbotroll,

I just noticed in my domoticz log a message at startup:
2020-04-07 11:10:43.776 Status: OpenZWave: using config in: /usr/local/domoticz/Config/
2020-04-07 11:10:43.790 Status: OpenZWave: Starting...
2020-04-07 11:10:43.790 Status: OpenZWave: Version: 1.6-1063-g04969b71
2020-04-07 ...

Hi,

I have been running domoticz for a couple of years, and until a couple month's ago, it was all good 'n dandy. But when upgrading to OpenZwave 1.6 a lot of problems started. I have been really busy with real life / work etc, so never got around to it to fix it, but it annoyed me terribly. So i ...