I use a cc2531 coordinator in a zigbee2Mqtt network with Domoticz v.1.18.1 (zStack12 20201127) The zigbee network that can be generated (Custom tab) shows red arrows to and from the coordinator. However, some devices are connected with a red arrow from the coordinator and a bold green arrow towards ...

I have been able to pair the (now) Ledvance Switch mini (smart+ indoor) with a cc2531 gateway, zigbee2mqtt and Domoticz. I do see the device in the list for the switch state, voltage, signal and percentage, but using the device does not change the switch state to any of the many choices that can be ...

Yes did, the ones I mentioned are not listed. New question: does listing in the devices list that they will - by definition - be operating in Domoticz with no problem? The Ledvance Plug can also be added to the suppoted devices list: https://www.bol.com/nl/p/ledvance-smart-zigbee-slimme-stekker ...

I was looking at the following dimmes, is there any experience with these or others? (I am using the cc2531 gateway stick) - https://www.aliexpress.com/item/1005002164359835.html - https://www.aliexpress.com/item/1005001599812277.html - https://www.leddirect.nl/yphix-draadloze-led-dimmer-zigbee-230v ...

Does anybody have experience with the CC2652RB yet?
Will it run as coordinator with zigbee2mqtt?

The Zigbee2MQTT software (by koenkk) and the corresponding Domoticz plugin (by StasDemydiuk) are in my experience outstanding! All these devices successfully paired with zigbee2mqtt straight away, and were automatically added to Domoticz via the zigbee2mqtt plugin. True, however I am unable to use ...

Noobs question: Is there some kind of manual / explanation how to install jumbotroll's package and USB driver for synology (DS213j in my case)?
Thanks

My solar power inverter does not have internet capabilities, so I use S0 ports of kWh meters to measure the production data from two inverters, using an Arduino Pro Mini, and some input circuitry. That works fine, however I had problems finding a way to show the data in one grah in Domoticz, by ...

Dear Jumbotroll, I am using an old Domoticz version on an old Synology with an old DSM version. (I am old myself as well). I would like to upgrade both but not sure about the order I should take and whether it is possible at all given this starting point. Can I retain the Domoticz setup I have at ...

Thanks for the reply. This worked indeed, although I had to switch OFF the Left01 without delay, otherwise the KAKU was going ON and OFF repeatedly.
I am using version 3.8153 on a Synology.

I use a simple switch (Left01) to switch ON and OFF a KAKU.
See my Blockly in the attched file. Most of it works OK, except the KAKU only switches OFF, never ON
Why is that?
Thanks

Interesting, do you have any results yet? I mean: what movement can be noticed?
From the datasheet I see that you need an earthquacke above Richter 5 to get a signal. This is a rather firm earthquacke....

I wonder whether it would be possible to combine graph-lines from different sensors in one pane? Is there flexibility in the timeframe (1 day -> multiple).
If not possible, can data be exported to grafana?
thanks, newbee question I suppose.