Just tested the Shelly Plug S, works like a charm. I selected the Shelly 1 as a device and it worked straight away.

I did almost the same. My original doorbel pushbutton is connected to a KaKa doorbell. When the button is pushed, I get a telegram message including a picture of the camera pointed at the front door. I put this all in a script that is triggered when the button is pushed. So the telegram message is a ...

I've bought an external bluetooth dongle as well. It's even a 'long range' version. I've given up and I'm just using the proprietary app on the phone. That wasn't the idea behind this when I bought the motors though.

How is this working for you? For me the results were quite inconsistent. My experience is that the bluetooth connection isn't working all the time. I haven't tried your setup, but it wasn't quite as stable as I hoped.

Am I the only one to which this happens: I can turn off the tv through the network, but when it is off, it won't turn on. This happens with the LG app, but also in Domoticz. Think you need to allow that in the settings of the tv. Checked this, power-on by wifi is enabled. But I'm not using wifi ...

I though I already configured that. I'll double check.

Too bad I ordered 5 of them and a long range bluetooth adapter...
Even if I have to push the buttons to operate them, at least my wife will be happy.
I''ll give it a go anyway.

Thanks for the info.

Jon.

Thanks Roblon. That doesn’t sound very promising. I’m planning to install 5 of them, 3 are already in and 2 underway. But indeed the device itself seems to be unreliable. It disappears from the app on the phone too. I was looking for a way to get full functionality in Domoticz, all sensor values and ...

Not much activity on this subject... Dec 27 12:43:20 Bluetoothbridge python3[860]: * Serving Flask app "AOK-AM43" (lazy loading) Dec 27 12:43:20 Bluetoothbridge python3[860]: * Environment: production Dec 27 12:43:20 Bluetoothbridge python3[860]: WARNING: This is a development server. Do not use it ...

Am I the only one to which this happens: I can turn off the tv through the network, but when it is off, it won't turn on. This happens with the LG app, but also in Domoticz.

Any news on this Roblom?

Is anyone using this? When I do a CheckStatus, this returns: { "Blinds1": [ { "battery": 87, "light": 0.0, "macaddr": "02:xx:80:xx:b1:xx", "position": 255 } ], "status": "OK" } To me this looks like there's communication, but I cannot control the blinds. And position is always 255, no matter if it's ...

I'm willing to test it Bram.

And, how did it work out? Have ordered one for testing. Had to have a custom chainwheel 3d printed, but now it's working fine. So I ordered 4 more and only then I found this topic. So I'm very curious about your experiences.

Nevermind, RTFM did the trick.

Hey Zak,

Thanks for you reply. I've checked it, the ini file is being created. The device is still not created.

Dear Zak45, I've got your plugin running, but no devices are being created when I want to save a command. I've set the debuglevel to all and found this after saving the command: 2020-10-29 09:31:22.384 Status: User: Admin initiated a switch command (231/Broadlink - Opdrachten/Set Level) 2020-10-29 ...

Hi Jon, what IP do you use? From your Domoticz server? ... I use the IP-address of the Domoticz server: imageUrl: 'http://192.168.*.*:8080/camsnapshot.jpg?idx=2', videoUrl: 'http://192.168.*.*:8080/camsnapshot.jpg?idx=2', Working remotely shouldn't be a problem. As long as Dashticz is able to ...

Best thing about this plugin is that it works without any additional software. No MQTT, no need to flash the shelly devices, nothing. Just configure the Shelly through its webinterface and that's it.

Tested with the Shelly 1 and the Dimmer and it's working great.

Jon.

The same: icons showing through the stream when clicked on the preview. It definetely looks like a Z-ordering issue.

Jon.