Domoticz

AurelioF

It has an erratic behavior, only detects an x10 device, but not always. If only Active Lighting4 nothing happens. If only active x10 detects a device, but it seems to act strangely, not when opening or closing. If Active Lighting4 and x10 behaves in a similar way only if active undec and Lighting4 ...

AurelioF

it seems that this model is not supported, if it responds to opening or closing, but only information appears when I use Lighting 4 and undec together ------------------------------------------------ 04/06/2019 12:49:35:358 Packettype = Lighting4 subtype = PT2262 Sequence nbr = 108 Code = D0F60A ...

AurelioF

ok thank you very much for the information, I will try to prove it.

AurelioF

Hi all.
Someone could make this sensor work, Domoticz detects it as a sensor (X10)

RFXCOM D0F600 0 Unknown Security X10 security Motion

It does not change state.
Thank you.

: 000.jpg (91.86 KiB) Viewed 1511 times

AurelioF

Hello haajee, I use raspbian in my pi, and it works without problems, I use the version of Python: 3.5.3, in the Domoticz wiki you can find all the information to install.
If you have difficulties trying to help you.

AurelioF

ok thank you very much mvzut, I am willing to experience what is necessary. for me the current method works well, and has the advantage of being able to completely close valves (guest room) without influencing the rest, just comment as general information in case someone could find the same problem ...

AurelioF

Some appreciations after a few days of use. First I want to say that in my installation I still do not have wall thermostats, I hope to solve this situation in a few days. I'm working with 11 valves and their corresponding integrated thermostats, I know this is not the best. in my case the ...

AurelioF

So got it installed. Valves are over 50%, but the Heat demand wont switch. It seems that there is some problem, mvzut is reviewing the code. I reviewed the code, and found a bug! For some reason, the state of the Heat demand switch is undefined directly after it is created. Since I do a check if it ...

AurelioF

DarkG wrote: ↑Sunday 28 October 2018 17:40 So got it installed. Valves are over 50%, but the Heat demand wont switch.

It seems that there is some problem, mvzut is reviewing the code.

AurelioF

DarkG wrote: ↑Sunday 28 October 2018 15:41 How did you update the plugin?

The update is done with

Code: Select all

git reset --hard
git pull

But problems may appear, keep in mind that it is still in development, visit.

viewtopic.php?f=34&t=25081&start=40#p195558

AurelioF

It is correct "246 valves require heat"
246 seems a high value

I only have 25 devices in this machine

AurelioF

Ok, good to hear it at least doesn't give error messages anymore (the "thread seems to have ended unexpectedly" message occurs for me too, although rarely, I suspect this happens when the communication with the Cube occasionally takes too long). Are the valve positions updated correctly? Can you ...

AurelioF

I started a clean installation, I'm using Domoticz V. 4.10111, Python Version: 3.5.3, the installation of the plugin worked fine, but after a few minutes it gave an error message. 2018-10-27 20: 57: 19.660 Error: hardware eQ3 (2) thread seems to have ended unexpectedly After this, no more errors ...

AurelioF

The last 4 lines are repeated periodically. Are the valve percentages updated correctly? And did everything work correctly in the previous version? Somehow (one of) your valves report "None" as percentage. I could send you a version with even more logging to find out what's going wrong. But this ...

AurelioF

The last 4 lines are repeated periodically.

AurelioF

2018-10-26 23:06:49.300 Error: (Rad) 'onHeartbeat' failed 'ValueError':'invalid literal for int() with base 10: 'None''. 2018-10-26 23:06:49.300 Error: (Rad) ----> Line 330 in '/home/pi/domoticz/plugins/MaxCube/plugin.py', function onHeartbeat 2018-10-26 23:06:49.300 Error: (Rad) ----> Line 288 in ...

AurelioF

I can start a clean installation, for the moment I am still doing tests.

AurelioF

2018-10-26 23:06:49.300 Error: (Rad) 'onHeartbeat' failed 'ValueError':'invalid literal for int() with base 10: 'None''. 2018-10-26 23:06:49.300 Error: (Rad) ----> Line 330 in '/home/pi/domoticz/plugins/MaxCube/plugin.py', function onHeartbeat 2018-10-26 23:06:49.300 Error: (Rad) ----> Line 288 in ...

AurelioF

mvzut wrote: ↑Friday 26 October 2018 21:01 Ok, I'm not sure I completely understand... Is it working now? And does the heat demand switch work as expected?

Sorry, my english is not good ...
The heat demand switch does not work, it always remains OFF

AurelioF

my cost more than expected solve the problem, delete all devices and restart domotiz, but continue the problem, finally change the names in MAX and there are no error messages, although the demand for continuous heat was even with more than one valve in heats greater than 25%

Search found 33 matches

Re: Cheap 433MHz door sensor (with open and close)

Re: Cheap 433MHz door sensor (with open and close)

Re: Cheap 433MHz door sensor (with open and close)

Re: Cheap 433MHz door sensor (with open and close)

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!

Re: Python plugin: ELV/EQ-3 MAX!