Search found 28 matches

by ActionHenk
Wednesday 24 June 2020 14:14
Forum: Installation, Compiling, Permissions, Security and Starting
Topic: install domoticz 4.9700, or other older versions.
Replies: 3
Views: 3140

Re: install domoticz 4.9700, or other older versions.

Allright, Ive got domoticz stable version 4.10717 running on ubuntu as a virtual machine in synology! It has zwave 1.4 so for now this is the best i can find that comes close to domoticz 4.9700. I am happy! Oke what i did was install it on ubuntu 18.04 instead of 20.04, that did the trick. So this ...
by ActionHenk
Wednesday 24 June 2020 10:48
Forum: Installation, Compiling, Permissions, Security and Starting
Topic: install domoticz 4.9700, or other older versions.
Replies: 3
Views: 3140

Re: install domoticz 4.9700, or other older versions.

Thanks, I tried to install the stable version in your link. Did it with these steps/commands: #1 stop domoticz (sudo service domoticz.sh stop) #2 Remove the domoticz folder (rm -rf domoticz) #3 Make a new domoticz folder (mkdir domoticz) #4 Go to that folder (cd domoticz) #5 Download domoticz (wget ...
by ActionHenk
Tuesday 23 June 2020 16:27
Forum: Installation, Compiling, Permissions, Security and Starting
Topic: install domoticz 4.9700, or other older versions.
Replies: 3
Views: 3140

install domoticz 4.9700, or other older versions.

Hi, Is there a way to install a older version like domoticz 4.9700 with a command? Or where can i download the older versions? With the broadlink api or python i can install different versions within the commandline, that seems not the case for domoticz. I'm running ubuntu 20.04 as a virtual machine ...
by ActionHenk
Sunday 24 May 2020 23:33
Forum: Python
Topic: Python Plugin : Broadlink RM2 V4
Replies: 651
Views: 116685

Re: Python Plugin : Broadlink RM2 V4

This domoticz plugin is based on the broadlink 0.8 api. 0.14 doesnt work, 0.10 does work yeah. you can install and uninstall different versions with these commands sudo pip3 uninstall broadlink This uninstalls the version that is installed on your setup. sudo pip3 install broadlink installs the ...
by ActionHenk
Tuesday 09 July 2019 17:38
Forum: Suggestions
Topic: Blockly's saved in a folder instead of in the database
Replies: 10
Views: 2226

Re: Blockly's saved in a folder instead of in the database

Thank you very much!

I will look into that,

I guess the best way to secure your working setup is to backup the sd-card to a image. Its a little time consuming but, at least i'm sure it is 100% safe!

Anyway, thanks all, really really love domoticz!
by ActionHenk
Monday 08 July 2019 14:13
Forum: Suggestions
Topic: Blockly's saved in a folder instead of in the database
Replies: 10
Views: 2226

Re: Blockly's saved in a folder instead of in the database

Oke this is entirely new for me, thanks! I'm gonna sort that out.

Another question, when after a fault, crash, or whatever, can i be absolute sure that ,when uploading a database file to a fresh running sd-card image doesnt contain any shit that will break my fresh image running domoticz?
by ActionHenk
Monday 08 July 2019 11:51
Forum: Suggestions
Topic: Blockly's saved in a folder instead of in the database
Replies: 10
Views: 2226

Re: Blockly's saved in a folder instead of in the database

Thank you all for your answers. My database files where between 15 and 24 mb large, i manage to keep it smaller between 4 and 8 mb by making the log sensor days smaller. Anyway, last night i did write the backup image with win32diskmanager to another samsung sd-card, and it seems i can load now ...
by ActionHenk
Monday 08 July 2019 3:11
Forum: Suggestions
Topic: Blockly's saved in a folder instead of in the database
Replies: 10
Views: 2226

Blockly's saved in a folder instead of in the database

Hi, Is it possible to save the blockly's outside the database? I have a very stable domoticz sd-card setup, and sometimes if i screw arround with settings, updates or plugins that don't work i return to a sd-card backup from a few days earlyer. Only thing is, i have to redo all the blockly changes i ...
by ActionHenk
Thursday 21 March 2019 11:07
Forum: Utility
Topic: pi #2 check if domoticz running on pi #1 is online
Replies: 10
Views: 2757

Re: pi #2 check if domoticz running on pi #1 is online

I think a new time has come, i have to learn code. I Always ignored learning codes and finding other ways to get there and untill now i managed.

Thank you all for your kind help!
by ActionHenk
Wednesday 20 March 2019 9:59
Forum: Utility
Topic: pi #2 check if domoticz running on pi #1 is online
Replies: 10
Views: 2757

Re: pi #2 check if domoticz running on pi #1 is online

But i don't want it to reboot, or send a message, or a mail, i want it to turn off a dummy switch or a idx # I readed the manual, but it seems thats not possible. I think my best bet is to trigger a dummy relay with a 10 seconds timer, every 5 seconds domoticz will trigger that relay, if domoticz is ...
by ActionHenk
Wednesday 20 March 2019 8:49
Forum: Utility
Topic: pi #2 check if domoticz running on pi #1 is online
Replies: 10
Views: 2757

Re: pi #2 check if domoticz running on pi #1 is online

hmm, it looks like both services only restart domoticz, but cannot trigger a dummy switch. I need this for a fail safe, both raspberry #1 and #2 will run relais, those relais from #1 and #2 are in serial and will only power a device if both relais are switched on , so if domoticz #1 is offline ...
by ActionHenk
Wednesday 20 March 2019 8:33
Forum: Utility
Topic: pi #2 check if domoticz running on pi #1 is online
Replies: 10
Views: 2757

Re: pi #2 check if domoticz running on pi #1 is online

You can use node-red with a webhook http://127.0.0.1:8080/json.htm?type=command&param=getversion from same machine or with network IP from another. I use it to monitor Domoticz then restart it if it has failed. Here is the original thread by the person who created the flow that I used. https://www ...
by ActionHenk
Wednesday 20 March 2019 8:32
Forum: Utility
Topic: pi #2 check if domoticz running on pi #1 is online
Replies: 10
Views: 2757

Re: pi #2 check if domoticz running on pi #1 is online

second raspberry pi must continue check if domoticz is running on my main raspberry pi domoticz setup. How can i do that? Search for monit on this forum and Google. Already many posts on this excellent monitor-, alert- and correction tool. I have heard of monit, can monit monitor a remote domoticz ...
by ActionHenk
Wednesday 20 March 2019 1:12
Forum: Utility
Topic: pi #2 check if domoticz running on pi #1 is online
Replies: 10
Views: 2757

pi #2 check if domoticz running on pi #1 is online

Hi, I am setting up a second raspberry setup with domoticz as a failsafe for some critical stuff. That second raspberry will run only some relais directly on his gpio pins, so far so good. Now this second raspberry pi must continue check if domoticz is running on my main raspberry pi domoticz setup ...
by ActionHenk
Thursday 01 November 2018 16:55
Forum: Python
Topic: Python Plugin : Broadlink RM2 V4
Replies: 651
Views: 116685

Re: Python Plugin : Broadlink RM2 V4

Hi, thanks for your answer.

Yeah my problem is more related to phyton, the plugin itself has no troubles once i installed it.

Could you explain what the phyton-broadlink-0.8 folder does? and what it is for?

Thanks!
by ActionHenk
Thursday 01 November 2018 1:34
Forum: Python
Topic: Python Plugin : Broadlink RM2 V4
Replies: 651
Views: 116685

Re: Python Plugin : Broadlink RM2 V4

Oke i installed a second raspberry pi from scratch because my currently main pi is having some issues and although i have a lot of sd-card backups its not really clear to me when the problems kicked in. Anyway everything was installing succesfull except the broadlink plugin, i really could not ...
by ActionHenk
Saturday 04 August 2018 5:23
Forum: Z-Wave
Topic: Understanding Mesh?
Replies: 3
Views: 1071

Re: Understanding Mesh?

Yeah i had this behaviour too, my mesh network was oke but everytime i reset the whole thing and start all over including all node's after a while i got node's that only connect with the controller or no connection like your node 12. Yes they keeped working but it irritated me. I have 43 node's ...
by ActionHenk
Monday 09 July 2018 23:04
Forum: Dashticz
Topic: how do i make my own dashticz dashboard?
Replies: 4
Views: 4121

Re: how do i make my own dashticz dashboard?

Hi HansieNL, i already readed the wiki over and over but i could not make much about it. Oke no idea what nano means but i assume it has to do with sudo nano commands. Do i need them? i thougt i could connect with WinSCP and just edit config.js with notepad++ Anyway ok, ill just try and see. Thanks!
by ActionHenk
Monday 09 July 2018 2:38
Forum: Dashticz
Topic: how do i make my own dashticz dashboard?
Replies: 4
Views: 4121

how do i make my own dashticz dashboard?

Hi, I really have no idea how to make my own custom dashticz view, i readed the wiki over and over and looked at the config files in the dashticz folder. I browsed this dashticz forum on domoticz.com for hours and i just can't find out how to start. Right now i have dashticz on my tablet with all ...
by ActionHenk
Sunday 15 April 2018 23:54
Forum: Z-Wave
Topic: neo coolcam motion sensor with temp sensor, unknown in domoticz
Replies: 32
Views: 6428

Re: neo coolcam motion sensor with temp sensor, unknown in domoticz

Oke i tried it, didnt work out :( also excluded and included a sensor.

I guess i have to wait till an new stable build comes out. By the way, i copied the zwave.me folder from the beta .tgz file to the config folder of my raspberry where i first deleted the original zwave.me folder.