This works great.

can you combine a speak and sound effect command?

this did not work > ./Alexa_tts.sh -e sound:amzn_sfx_trumpet_bugle_04, speak:'hello', -d 'Kitchen echo'

Ok thanks

I thought the lastest we could use was stretch. I will install buster and try again.

Hi All, I'm trying to install on debian9 but get - E: Package 'libboost1.61-dev' has no installation candidate E: Package 'libboost-system1.61-dev' has no installation candidate E: Package 'libboost-thread1.61-dev' has no installation candidate Do i need this version or can a newer one be installed?

Could this be done with an Arduino?

sorry, second post due to image upload limit.

any ideas where I might have gone wrong?

Thanks

Hi All, i have been using the rf link via USB for a couple of years but have decided to move it over to wi-fi using https://www.nodo-shop.nl/nl/home/191-rflink-wifi-koppelprint.html and https://www.nodo-shop.nl/nl/home/189-nodemcu.html after using an online translater I followed the setup guide ...

HansieNL wrote: ↑Thursday 30 January 2020 17:44 Have you tried to set the following config parameter:

Code: Select all

config['last_update'] = 0;

For full manual: https://dashticz.readthedocs.io/en/master/

DOH! Sorry, I didn't see that. makes life a lot easier

Things have been going well - dashticz.png I've managed to get the last seen update hidden on everything other than a few temperature sensors. So as you can see in the image, last seen is hidden on the block 2 but none of the other temp sensors /*Temperature Blocks*/ blocks[2] = {}; blocks[2]['last ...

With the block parameter icon: Defines alternative icon of the device instead of the default, choose from: https://fontawesome.com/icons?d=gallery&m=free You can change icon colors of a Domoticz switch via CSS. You can find full description in the manual: https://dashticz.readthedocs.io/ Cool ...

With the block parameter icon: Defines alternative icon of the device instead of the default, choose from: https://fontawesome.com/icons?d=gallery&m=free You can change icon colors of a Domoticz switch via CSS. You can find full description in the manual: https://dashticz.readthedocs.io/ Cool ...

Hi Tycho, I'm assuming under the status section the device status dependant on a ping check? https://www.domoticz.com/wiki/System_Alive_Checker_(Ping) I have followed the guide linked above and the checks work ok but are displayed using a lamp icon in dashticz. How did you get green and red icons ...

Hi All, recently rebuild my computer and have run into the following problem - /usr/bin/python2.7 energy_cost.py Traceback (most recent call last): File "energy_cost.py", line 36, in <module> kW = domoticzread(OwlIdx, 'CounterToday') File "energy_cost.py", line 32, in domoticzread jsonData = json ...

Can't get the script to work with iPhone or android

works on laptops etc

Hi Jos,

thank you very much, adding the local address got it working

hi all, i'm getting the following - root@Domoticz:/home/gareth/domoticz/scripts# ./check_device_online.py 192.168.1.1 6 10 120 22:23:29- script started. Traceback (most recent call last): File "./check_device_online.py", line 101, in <module> lastreported = domoticzstatus() File "./check_device ...

Hi all,

I'm after a suggestion for a good 433mhz antenna for my rflink.

My garden sensor is 25 meters away from the rf link and it can't be seen when in place.

This is my current antenna -

"CounterToday" : "6.6 kWh",
"CustomImage" : 0,
"Data" : "167.985 kWh",

Does any one know if the data sting will reset monthly or just keeps counting?

Screen Shot 2018-04-01 at 22.00.26.png all working great here :D thank you so much MikeF i had to specify the python3 path to get it to work in cron using the following */1 * * * * /usr/bin/python3.5 /sbin/energy_cost.py >> /var/log/energy_cost.log 2>&1 added a log output for errors when the cron ...

is the fixed cost the daily meter rental charge or am i understanding that wrong?

Thanks MikeF

just got the script working


apt-get install python-requests

source ~/.bashrc