I changed from PI to windows server this week, but I can't seem to get the easy communication working, I installed Node JS on the server, and installed the nefit easy server too, and on the server itself I can read evrything from the easy, and also change temperature etc. Of course I can only do ...

I think the problem is that it doesn't know the password when setting, normally in pi I use the export commands, and after that all commands work without having to enter the password again. But I have no idea how to do this in node JS. All commands directly from within windows work just fine.

I initially didn't have a timeout set, but I just tried to see if this helped. But I will browse the mentioned post some more. I just don't understand that it worked (as far as reading data) until I tried to write something and thereafter nothing seems to work anymore. It seems to be in domoticz ...

inside domoticz I used to have a flow that switched off heating when my alarm went in away mode, but that flow is not active yet. I just want to be able to see my temperature, and change the mode and preset temperature.

I have no flow, I just only see the data. It worked when I started the server and connected to it, when I tried to change the mode and setpoint it lost connection and never came back. That is in domoticz, because when I ask for status in windows it just shows fine and also updates.

Thanks! It works now :-) uh, I thought it worked at least...all the data showed up in domoticz, but when I tried to change the mode or set the temperature, nothing happened. After that the data in domoticz also didn't update anymore, I actually saw the network get lost for a few seconds on the Easy ...

Hi, after another crash on my pi, I decided to switch to a small windows pc and run my domoticz installation from there. So far everything worked a lot quicker and way more user friendly then all the sudo this sudo that. The only thing that I still would like to get working is the connection to my ...

The one in this thread! Ok, I might have not made clear that I do not know HOW.... I understand the part about installing the patch, but after that it says rebuild domoticz and zwave...I have no idea how to do that...maybe it's easy for you, but I have all the rest working now and don't want to F ...

The one in this thread! Ok, I might have not made clear that I do not know HOW.... I understand the part about installing the patch, but after that it says rebuild domoticz and zwave...I have no idea how to do that...maybe it's easy for you, but I have all the rest working now and don't want to F ...

marin849 wrote: ↑Sunday 03 December 2017 15:30 The patch works for me two.
The switches can be used to trigger scenes in Domoticz directly as well.

The only missing feature now is the "button hold" recognizion.
Button hold gets recognized as "pressed 1 time".

eeeh...which patch?? How did you get it to work?

I just received a Topvico floor thermostat with Zwave and was wondering of anyone has got this working. I included the device and it is recognized as thermostat, with time setting, setpoint, on/off and clock program. But the only thing that seems to work is switching it off and on, if I change the ...

Tried some more, added a memory switch so that all is only switched once during a change, I tried this with 2 wallsockets, when 1 was switched, the other switched along, but I could still change the second socket independently after that, so seemed to work as desired, BUT... when I try this with my ...

Hi, I am trying to switch everything off in my house when I switch on the alarm to away mode, also the heating switches to a fixed setpoint, and when disarming the heating switches back to program, this all works, but the problem is when I have the alarm switched off but for some reason I want to ...

I do notice that in the actual values there is no state, only in sValues (whatever that is) so I guess it ain't going to work in blockly...

I can't change the device type of the armed status, they are by default "text", same is for all outputs, all inputs are alerts with a numeric value (1=ok, 3=violation), only arming is a switch, but I cannot use that because then I still do not know when it is in home or away mode. Maybe try switch ...

I'm trying to set my nefit to manual mode and lower the temperature to 14 when the alarm is on (only when away) and back to automatic when alarm is off (or in home mode) but I can't get it to work, actually I can't do anything on the status of the alarm, even tried to just send an email when ...

ok thanks, would be nice if also possible in 2 (Stay) but for now i'm happy

Just managed to get connection and have all the inputs and outputs in domoticz now, is there a way to determine how to arm? (away or home/without internal) or is it only possible to arm all?

same here, I used it with homey before and worked fine, but recently changed over to domoticz and can see the 8 switches, but whatever I set them to (push on or off button, switch, contact, motion detector) state is always on, so I can't seem to switch anything with it. If you got it to work I'd ...

sorry I'm kind of new to this, both domoticz and satel, I just installed an Integra64plus, installed Domoticz on my Synology NAS and added the Satel to devices (so far so good) but really have no idea what to do next, is there a guide somewhere how to go on from there? I'd like to read status of arm ...