Unfortunately no positive effect:

Result:
2021-09-22 13:41:14.104 Error: ZigateV2: (ZigateV2) Ota detects Timeout while notifying device 9758
Regards
Frenki

Ok thanks, No I don't see any progress bar. Before the ultimate timeout I get these in the eventlog: 2021-09-13 17:11:09.101 Zigate: (Zigate) Ota retries notifying device 147a Thanks! I duplicate your problem and reported to Zigate https://github.com/fairecasoimeme/ZiGatev2/issues/23 Thank you very ...

Ok thanks,

No I don't see any progress bar.
Before the ultimate timeout I get these in the eventlog:

2021-09-13 17:11:09.101 Zigate: (Zigate) Ota retries notifying device 147a

Thanks!

Hi, I tried updating the firmware for my Ikea Tradfri Devices through the Zigate Plugin (USBzigate+ V2, Plugin: 5.1.009, Firmware: 0320) Unfortunately, i can't get it to work. I followed this manual: https://github.com/pipiche38/Domoticz-Zigate-Wiki/blob/master/en-eng/HowTo_Update-device-firmware.md ...

Hi Pipiche I switched from v2 to v1. However, I ran into problems with the zigate plugin, which didn't want to rediscover devices. Then I started all over again by removing the zigate plugin in domoticz and reinstalling it completely. I also reused and reset the v2. (did not want to give up on it ...

Ok thanks i'm going to do that, switch back to v1, and see what happens. For clarification the process i'm in: -The problem is first visible @ the plugin: unreachable devices. 2021-08-03_11-51-32.png -Than, in Domoticz the bulb or switch becomes "red" and wil not switch on/off msedge_2021-08-03_11 ...

Unfortunately, it had no effect. I have reconnect the unreachable devices through the plugin, again and again, but every time seconds later 2 or 3 other devices became unreachable. I have gone through this proces several times this evening, but i never get it to a state that 0 devices are lost. This ...

In addition, topology looks mutch better now !!!

Thanks Pipiche!! I enabled "displaySibling", after that started a new topology scan and got an error: msedge_2021-08-02_18-53-53.png Strange thing is, the device a62b is not known (anymore) in the zigate plugin, also in domoticz not to be found? Exactly, the devices are not realy lost, they are ...

Ok, Thanks! I don't use the Zigate groups, the lights are grouped whitin Domoticz itself. Everyday i lose different lights or switches (mostely the lights), but most of the time they come back on itself, somtimes in time, but mostely by rebooting the raspberry. In case they stay unavailable i ...

Hello Pipiche, At one point I have removed the zigate plugin from Domoticz Hardware, and added it and as new hardware in Domoticz. The IDX that is currently in use by the Zigatev2 = 27 I wil remove the other file, because in Domotix the v1 = IDX 21 is not there anymore. Apperently this file has not ...

Hello Pipiche, Thanks for the responce! No i did not have this problem with the v1 zigate, that is the strange thing about it. I thought it would be a simple migration from v1 to v2, adjust the settings in Domoticz to Zigate+ en rediscover all the zigbee devices in the plugin. Then the troubles ...

I switched from Zigate v1 to the zigate+ usb stick a few weeks ago. I had to reconnect all zigbee devices when i started using the new Zigate+ USB-Stick. Then the problems started, randomly unreachable devices in the plugin. When Domoticz and the plugin are restarted, the previous unreachable ...

But of course! Thanks for the response. export.zip Here is the file. After 2 weeks I think the Watt sensor is OK. It shows (3) days, month and year statistics and they are being filled with data. I see these same kind of statisics logs (days. month, year) also in other Watt sensors from other ...

@pipiche Hi, I'm running this powerplug now for a few days. The sensors that measure Watt and kWh work fine in realtime values. But in Month and Year I don't see the logs of the measurements in week, month, and year correctly. -Especially kWH sensor shows only "DAYS" measurements, in week, month and ...

@pipiche

So please do update to the latest stable version 4.9.004 or to the latest beta 4.10.

Perfect! Now it works, i was on 4.9.003 and now switched to the Beta Plugin: 4.10.003


Thanks for the support!!!

Hi @pipiche Thanks for the tip. I will post my export.json I now have 6 of these devices. The device names in the export are: -Beamer -Ventilator -TV Woonkamer -TV Keuken -Powerplug 5 -Powerplug 6 export.json.zip I als found the same question on another forum, with your reply on it: https ...

Hi @FireWizard Thanks for the solution, works like a charm! The Asun-650 doesn't work with percentages. I tried it, changed the devicetype in domoticz, but than it does not work anymore. When I want the shutter half open I have to use the same command again to open or close, than it stops the ...

Hi, thanks for the responce. I have updated Domoticz to the latest Beta. Removed the Zigbee device complete from Domoticz (the switch, kWh and Watt sensors, and some other devices related to the powerplug). Then I have re-detected and re-paired the zigbee powerplug in the zigate pluginn, and added ...

Hi, I have several of these zigbee plugs ZNCZ04LM. I think they are great, EU version, small and power measurement capability. I have them through Zigate connected on my Domoticz. They work perfectly, on/off. Also this plug can measure powerconsumption. When adding the Power plug to Domoticz I also ...