Zigate OTA update Ikea Tradfri

[atmfrenki]

Hi,

I tried updating the firmware for my Ikea Tradfri Devices through the Zigate Plugin (USBzigate+ V2, Plugin: 5.1.009, Firmware: 0320)
Unfortunately, i can't get it to work.

I followed this manual:
https://github.com/pipiche38/Domoticz-Z ... irmware.md
Through this manual I followed the steps, only at step 4 I found out that in the latetst Zigate-Plugin versions the OTA is already active and is not a selectable option anymore. (right?)

Than I tried to force an update to a Ikea Lightbulb.

Plugin.png (25.53 KiB) Viewed 1105 times

This is the result:

msedge_0bJaSZGiHW.png (2.35 KiB) Viewed 1105 times

I always receive a Timeout, I tried 2 different Lightbulbs and 2 different firmware's.

Does anybody have a tip on how to get this working?

Thanks!

Regards

Frenki

[pipiche]

If your bulb is a Tradfri GU10 WS 400lm then the image type to select is 0x2203 and the latest version is 2.3.050.

Thanks to Dresden maintaining that list
https://github.com/dresden-elektronik/d ... e-versions

Is the firmwae upgrading starting, do you see for instance in the log something like

Firmware transfert for dfc2/01 - Progress: 0.0 %

[pipiche]

Looks like there is a Bug in the Zigate+ (V2) firmware which prevent device OTA firmware

[atmfrenki]

Ok thanks,

No I don't see any progress bar.
Before the ultimate timeout I get these in the eventlog:

2021-09-13 17:11:09.101 Zigate: (Zigate) Ota retries notifying device 147a

Thanks!

[pipiche]

Ok thanks,

No I don't see any progress bar.
Before the ultimate timeout I get these in the eventlog:

2021-09-13 17:11:09.101 Zigate: (Zigate) Ota retries notifying device 147a

Thanks!

I duplicate your problem and reported to Zigate https://github.com/fairecasoimeme/ZiGatev2/issues/23

[marktn]

Is there a reason to update when there is no problem?

[atmfrenki]

Ok thanks,

No I don't see any progress bar.
Before the ultimate timeout I get these in the eventlog:

2021-09-13 17:11:09.101 Zigate: (Zigate) Ota retries notifying device 147a

Thanks!

I duplicate your problem and reported to Zigate https://github.com/fairecasoimeme/ZiGatev2/issues/23

Thank you very much!!

[pipiche]

Can you try the following:

1- stop the plugin
2- unplug the USB ZIGate for 10s and then plug in it back
3- restart the plugin

try the OTA firmware

Tradfri GU10 WS 400lm then the image type to select is 0x2203

[atmfrenki]

Unfortunately no positive effect:

Result:
2021-09-22 13:41:14.104 Error: ZigateV2: (ZigateV2) Ota detects Timeout while notifying device 9758

msedge_MNd28L9VIw.png (14.8 KiB) Viewed 1020 times

Regards
Frenki

[pipiche]

do you have any means to sniff the Zigbee traffic ?