waltervl wrote: Friday 17 February 2023 10:48 Perhaps an important new setting is the "Allow Basic Authentication over plain HTTP" in menu setup -> settings -> security

Unfortunetly not the Answer. Will post screens of setting here net post

Unfortunetly no succes here,

i Have one setup witch runs 2023.1 build 15082 and has been update from previous versions witch works ok.

And a fresh install with 2023.1 stable and gives the error. settings all the same.

Same problem here, on a fresh install.

Triple checked everything

The multiroom is pretty simple really, I just never thought to try outta fear of breaking everything.
Just add a new device in Hardware, same way you installed SVT in the first place. It adds the stuff needed to run SVT all by itself, but based on the name you chose for the hardware device ...

Thank you, Logread for this plugin. While the original idea isn't yours, like you've stated several times, the effort to make this available on Domoticz is.

There are two things I think should be added to Wiki, and/or at least to the Github page for this plugin:
DeltaMax. I know, it's new'ish ...

You should be ok - let me explore this. Can you try removing the Controlicz: piece and just use TypeControl: Blinds - does that work?

I'm assuming the device is added to the User as well? Shit... you've got me.. problem was in adding it to the user. Its now in the devices list and shown as blinds ...

Battery devices can now be queried - "What is the <devicename> battery level?"

Also, I have provided some new discovery behaviours. Not all devices discover as you would like, and you've asked for the ability to override these - now you can. From the FAQs:

you can provide a specific type of ...

Nope i only have the connexcoon.

Just tested it out and worked flawlesly no crashes upon adding screens.

thanks!

I have the popp TRV. Just sending an 28degree for on and a 8degree for off works fine here.

Domoticz plugin for Tahoma IO products... blinds interieur and exterieur!

https://github.com/nonolk/domoticz_tahoma_blind


works this plugin also with the connexoon? because that device is a lot cheaper than the tahoma... On github it is stated to work with the tahoma and the connexoon. I Will ...

Maybe something in dzvents like of between 0-1% all of, between 1-8% relay 1 om, rest off, etc etc

The stick is not listed. Looks like kot recognized.

Perhaps a reboot or different port? Are you using a sufficient power supply? Min 2 or 3 amp

Hi All,

Hoping that someone could help me out..

I have a script witch during night time and motion detect turns on the hallway light.

Right now it turns on at a preset level(25) when between sunset and midnight.

But i would like to remember at witch level the light was set manually lets see 37 ...

Just updated to 4.10751

And openzwave 1.6 returns the following

2019-05-14 21:38:23.826 Error: OpenZWave: Exception. Type: 102, Msg: ValueID passed to GetValueAsByte is not a Byte Value, File: /home/pi/open-zwave-read-only/cpp/src/Manager.cpp (Line 2192)
2019-05-14 21:38:33.013 Error: OpenZWave ...

Same probleem over Here!

What ive done is created a virtual switch called doorbell and made it a push on button with a switch of delay of 1 sec. Then in the iftt i made an app witch call a webhook when the doorbell is pressed. This switches the Domoticz switch. Usualy this is done within 10 seconds.

You are almost right Piotr, what I failed to mention is the frequency with which the room temperature is checked. So what actually happens is that, with a target of 23° and a TRV fully open at 28° if the target is exceeded by 0.1° then the TRV is turned down by 0.2°. Then 2 minutes later this is ...

Hi,

I'm not an owner of the CVE box but interested in you're script.

Willing to share?

Looks good!

But needs a lot of adaption to fit someones personal devices. Maybe easier to use some kind of setup with strings or user variables like in the DZvents setup:
viewtopic.php?f=59&t=25230

i Think i found it! The values in the selector switch have been renamed to Heating and Cooling. But now an other error comes in the log:

2018-11-13 22:37:00.306 Status: dzVents: Error (2.4.7): zoneTemperatures: Method switchOn is not available for device "TRV Kamer Li" (deviceType=Thermostat ...