Hi,

Has anyone the Popp Flow stop 2 (or 2) running with Domoticz and Aeon Gen5 Stick?

Maybe something similar?

I need such a solution very urgently. Any help is highly appreciated!

https://shop.zwave.eu/de/artikel/spezie ... sperrmotor

Nice! Apperently none of my search keywords ade a hit to this awesome POST! Thank you

Hi all,

I'm stuck. I don't find a as simple as possible migration from SD Card to ssd.

The system must not boot from hdd, but anything else should use the ssd, so I protect the sd card.

I had two sd card failures in the past and it was quite a lot of effort to set it back up without backup :roll ...

Found a solution!

#TIL about Rules in Tasmota. Very powerful and easy.

For my PIR I've added the following code via the console:
SwitchMode1 1

SwitchTopic 0

Rule1 on switch1#state=1 do backlog publish domoticz/in {"command":"udevice","idx":241,"nvalue":4,"svalue":"Bewegung_erkannt"};RuleTimer1 ...

Hi all,

I'm playing around with the D1 mini. Tried Reed Contacts and a PIR. Anything is working fine but I cannot get any update to Domoticz.

Im using the generic 18 module and set Pin D2 to Switch1. Configured MQTT and Domoticz like the other 4 Tasmota Devices that I have. Checked it the 5th time ...

I also can recommend Tasmota WiFi plugs. Finding Tasmota suitable devices is not hard ;)

http://blakadder.github.io/templates/eu.html

I use the Blitzwolf and Gosund Plugs. Soldering was not so hard.it was harder to remove the screws :D

I use NON-tasmota Plugs too, the TP Link HS-110. You'll ...

Thanks again waaren! Works like a charm!

Thanks a LOT!
I'll try osCommand(...) as helper function until Wednesday.
It seems to be exactly what I'm looking for!

Hi,

is it possible somehow to ca a bash script from DzVents? (location: script://home/piuser/domoticz/scripts/myscript.sh)

Background:
I want to TTS my Washingmachine and Dryer Status to Alexa via the alexa_remote script. Yes, I could do it with On and Off actions on a switch or using the http ...

Hi,

You'll have to...

* replace the encrypt and decrypt functions with new ones
* add the 'from struct import pack' line
* alter the json query to... ']['power_mw'] / 1000
* alter the json query to...']['total_wh']

Sry I'm not at home.. This description is all I can deliver for now. Also I'm ...

Hi guys,

"UPDATE 04.07.2018:
We updated our tool. It now supports TP-Link HS100, HS105 and HS110 with the latest firmware. Hostnames instead of IP addresses are also supported and the script can now be imported as a Python module. A big thank you to the persons who opened issues and pull requests ...

Tried it out! Is working ootb like a charm! Just want to leave a huge thank you! I use the HS-110 to measure loads greater than 2,5kW.

Hi,

I have the FIBARO System FGS213 Switch+ running.
Everything worked almost out of the box. After inclusion a restart fixed the issue that it did not switch. There is a thread about this.

It's also recognized as a switch, reporting all values without any problems.

Unfortunately I can't give any ...

Also worked for me! Thanks a lot for this hint!

Might be a Problem... Now one of the radiator controllers dropped down to 9 degree and has not been seen again in domoticz since then ...strange.
Wife is not amused ...

Hi there,

My Devolo Room Control Device is, all of the sudden, sending wrong temperatures. The Display says 18 but in Domoticz it's 36,5, as an example. The temperature literally jumped from 20 to almost 40 deg, while the Display value on the Device itself still displaying 20.. This happened in the ...

I've just learned the same ... Sad!
In another thread and herevalso some friendly user mentioned https://www.notifymydevice.com/

No ifttt support as i can tell, but i'll give it a try

Try to look at it via MyDomoticz. I found it there, but not via my local Webview :/
If you use that feature in MyDomoticz, you wont be able to edit it on you local view... Unfortunately

Thanks a lot! That really helped! I didn't know that there is actually a way to set the setpoint with Blockly! Unfortunately I don't use the Beta version right now, and in the latest Stable the setpoint blocky is not available.

That lead to another noobie question: How stable are the Domoticz ...

Thank you all for your replies! They all lead to another hundred cycles of rethinking everything just to rethink it all again afterwards! Hehe! I'm shure you know what I'm talking about!

I will go with the expensive Z-Wave. I've read some negative things about the future if 433Mhz in Germany and ...