Domoticz

Hi All,

I am Running a USB RFXtrx433E with

Firmware version = 1028
Firmware Type = Ext

Connected to Domoticz 2023

I brought a Bresser temp/hydro sensor from amazon netherlands(ART No 7000993) and unable to see it in Domoticz or with rfxman, meanwhile my remote blind controls work fine. I have enabled both FineOffset and FineOffset.

I check the latest RFXtrx User Guide, it looks like it is not supported on the RFXtrx433E.
I tried some different firmware but nothing seems to work.

Any advice on which temp/hydo sensors will work with a USB RFXtrx433E and which firmware to use?

Cheers
Tim

I bought a bunch of these and they worked well.

https://www.aliexpress.com/item/3288128 ... 18020D6Woz

I have firmware Pro2/1044 and I have Oregon Scientific THGR800 (temp and humidity) and also an older Oregon temp-only sensor (not sure of the model number but Domoticz shows it as "THR128/138, THC138"). Both work nicely.

I ordered three of the aliexpress ones on the link you mentioned. Can you confirm the firmware version you are running on the RFXtrx433E?

taw6 wrote: ↑Tuesday 21 February 2023 22:31 I ordered three of the aliexpress ones on the link you mentioned. Can you confirm the firmware version you are running on the RFXtrx433E?

Version Pro2 / 1043

They appear as "Alecto WS1700"

Installed pro2/1043 waiting for the temp sensors to turn up

These temp sensors also work fine:

https://www.amazon.nl/gp/product/B0819T ... UTF8&psc=1
https://www.amazon.nl/gp/product/B001QL ... UTF8&psc=1