Update with Raspberry PI. (linux)

[jossie67]

Update with Raspberry PI.

Is it posssible to update RFlink with Raspberry PI?
Now I have to disconnect the RFlink, connect it to a windows PC and update.
It would be much easy when I can just update the RFlink in Linux

[MarcE85]

Hey,

it is possible with Linux.


Commands:

• sudo service domoticz stop
• sudo apt-get install avrdude
• avrdude -v -p atmega2560 -c stk500 -P /dev/ttyUSB0 -b 115200 -D -U flash:w:/home/pi/RFLink.cpp.hex:i
• sudo service domoticz start

Just replace the ttyUSB0 with your connection and home/pi/RFLink.cpp.hex with your path to the file.

Regards Marc

[jossie67]

Thanks!

[htca]

I get this error:

Code: Select all

avrdude: stk500v2_ReceiveMessage(): timeout

tried different things, but it did not help (I managed to use this method on earlier versions btw)

This is the command I give:

Code: Select all

avrdude -v -p atmega2560 -c stk500 -P /dev/ttyUSB0 -b 115200 -D -U flash:w:/home/pi/rflink46/RFLink.ino.hex:i

I tried different tty's (ACM0) as well.

any clue?

[devros]

on my Orangi pi adress is /dev/ttyACM0
sometimes its not working on first try, check if domoticz is stoped