Domoticz

Hi to all,
is there a tag / card reader integrable in domoticz?
Thanks!!

hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

I've got some troubles with the Gateway: Somehow, once every while, the 'Lux' stops functioning. As I have a script running that triggers lights based upon the Lux amount, this results in a diminishing WAF factor....
Anybody recognizes this?

Also searching for extra Lux sensors, but can't seem to find them (just the 'Klik-aan-Klik-uit' version)

DAVIZINHO wrote: ↑Friday 29 September 2017 11:27 hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

Same question for me, using the dev version of Domoticz
They have a special price on Gearbest today : https://www.gearbest.com/home-smart-imp ... 68897.html

Not found on this list : https://www.domoticz.com/wiki/Xiaomi_Ga ... le_Devices

tho071088 wrote: ↑Tuesday 03 October 2017 11:13

DAVIZINHO wrote: ↑Friday 29 September 2017 11:27 hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

Same question for me, using the dev version of Domoticz
They have a special price on Gearbest today : https://www.gearbest.com/home-smart-imp ... ?lkid=XXXX

Not found on this list : https://www.domoticz.com/wiki/Xiaomi_Ga ... le_Devices

Please remove your lkid from the link on this forum !

chatainsim wrote: ↑Tuesday 03 October 2017 15:53

tho071088 wrote: ↑Tuesday 03 October 2017 11:13

DAVIZINHO wrote: ↑Friday 29 September 2017 11:27 hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

Same question for me, using the dev version of Domoticz
They have a special price on Gearbest today : https://www.gearbest.com/home-smart-imp ... ?lkid=XXXX

Not found on this list : https://www.domoticz.com/wiki/Xiaomi_Ga ... le_Devices

Please remove your lkid from the link on this forum !

Sorry, I did not pay attention, link edited

hi, sorry if i have a old question, but i not can add gateway in domoticz...i have all port open but the reponse of domoticz is

XiaomiGateway: will listen on 9898 for hardware id 4
XiaomiGateway: Delaying worker startup...
XiaomiGateway: Worker started...

domoticz is install in windows 2012R2 server on my pc at office. The pc is connected in LAN (cabled). In to the pc if i ping the gtw it respond. I have test udp port with packet sender and the risult is attached.

Can you help me? i have reinstall the app to the my Android phone but nothing, nothing seems to work

tho071088 wrote: ↑Tuesday 03 October 2017 16:03

chatainsim wrote: ↑Tuesday 03 October 2017 15:53

tho071088 wrote: ↑Tuesday 03 October 2017 11:13

Same question for me, using the dev version of Domoticz
They have a special price on Gearbest today : https://www.gearbest.com/home-smart-imp ... ?lkid=XXXX

Not found on this list : https://www.domoticz.com/wiki/Xiaomi_Ga ... le_Devices

Please remove your lkid from the link on this forum !

Sorry, I did not pay attention, link edited

Thanks

Mace wrote: ↑Tuesday 03 October 2017 8:50 I've got some troubles with the Gateway: Somehow, once every while, the 'Lux' stops functioning. As I have a script running that triggers lights based upon the Lux amount, this results in a diminishing WAF factor....
Anybody recognizes this?

Also searching for extra Lux sensors, but can't seem to find them (just the 'Klik-aan-Klik-uit' version)

I have exactly the same issue with the Lux sensor of the gateway! In theory, it works very well, but in my case, it stops working every night and is then offline for 12h or so.
The second generation of the motion sensor (now also under the Aqara branding) has an build in Lux sensor, but this sensor is very inaccurate and therefore not usable.
So I‘m also searching for an accurate and reliable Lux sensor.

timh1004 wrote: ↑Tuesday 03 October 2017 22:08

Mace wrote: ↑Tuesday 03 October 2017 8:50 I've got some troubles with the Gateway: Somehow, once every while, the 'Lux' stops functioning. As I have a script running that triggers lights based upon the Lux amount, this results in a diminishing WAF factor....
Anybody recognizes this?

Also searching for extra Lux sensors, but can't seem to find them (just the 'Klik-aan-Klik-uit' version)

I have exactly the same issue with the Lux sensor of the gateway! In theory, it works very well, but in my case, it stops working every night and is then offline for 12h or so.
The second generation of the motion sensor (now also under the Aqara branding) has an build in Lux sensor, but this sensor is very inaccurate and therefore not usable.
So I‘m also searching for an accurate and reliable Lux sensor.

Maybe with Mi Flora ? It does have a Lux sensor.
For outside I'm using weatherunderground API.

tho071088 wrote: ↑Tuesday 03 October 2017 22:15

timh1004 wrote: ↑Tuesday 03 October 2017 22:08

Mace wrote: ↑Tuesday 03 October 2017 8:50 I've got some troubles with the Gateway: Somehow, once every while, the 'Lux' stops functioning. As I have a script running that triggers lights based upon the Lux amount, this results in a diminishing WAF factor....
Anybody recognizes this?

Also searching for extra Lux sensors, but can't seem to find them (just the 'Klik-aan-Klik-uit' version)

I have exactly the same issue with the Lux sensor of the gateway! In theory, it works very well, but in my case, it stops working every night and is then offline for 12h or so.
The second generation of the motion sensor (now also under the Aqara branding) has an build in Lux sensor, but this sensor is very inaccurate and therefore not usable.
So I‘m also searching for an accurate and reliable Lux sensor.

Maybe with Mi Flora ? It does have a Lux sensor.
For outside I'm using weatherunderground API.

Great recommendations! Thank you!

fabiotodesco wrote: ↑Tuesday 03 October 2017 16:12 hi, sorry if i have a old question, but i not can add gateway in domoticz...i have all port open but the reponse of domoticz is

To test this, you should be sending to the multicast address 224.0.0.50, not 192.168.134.250. I'm guessing you tried that first but changed to the actual device IP because the multicast address wasn't working, and if that is the case it is probably your Windows firewall blocking it, or your router/network configuration not working with multicast.

timh1004 wrote: ↑Tuesday 03 October 2017 22:08 The second generation of the motion sensor (now also under the Aqara branding) has an build in Lux sensor, but this sensor is very inaccurate and therefore not usable.
So I‘m also searching for an accurate and reliable Lux sensor.

Do you have some more info/reviews on this? Seems to be the only viable option so far...

tho071088 wrote: ↑Tuesday 03 October 2017 11:13

DAVIZINHO wrote: ↑Friday 29 September 2017 11:27 hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

Same question for me, using the dev version of Domoticz

Yes it needs to be the dev/beta version. Are you getting an 'Unknown' message in the logs, if the device is not detecting, and isn't coming up as unknown it may not be supported in the firmware yet. I don't have one to test and just copied "sensor_wleak.aq1" as the device model from another project.

corbin wrote: ↑Wednesday 04 October 2017 11:11

fabiotodesco wrote: ↑Tuesday 03 October 2017 16:12 hi, sorry if i have a old question, but i not can add gateway in domoticz...i have all port open but the reponse of domoticz is

To test this, you should be sending to the multicast address 224.0.0.50, not 192.168.134.250. I'm guessing you tried that first but changed to the actual device IP because the multicast address wasn't working, and if that is the case it is probably your Windows firewall blocking it, or your router/network configuration not working with multicast.

HI, thanks for te answer but the firewalll of windows is disable, but i have a mikrotik firewall thath control the network. i don't understand this multicast story can you explain me?

Thanks a lot

corbin wrote: ↑Wednesday 04 October 2017 11:18

tho071088 wrote: ↑Tuesday 03 October 2017 11:13

DAVIZINHO wrote: ↑Friday 29 September 2017 11:27 hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

Same question for me, using the dev version of Domoticz

Yes it needs to be the dev/beta version. Are you getting an 'Unknown' message in the logs, if the device is not detecting, and isn't coming up as unknown it may not be supported in the firmware yet. I don't have one to test and just copied "sensor_wleak.aq1" as the device model from another project.

Is there a way to add only file with support for the water sensor?
(i have done this before with .xml file for open z-wave, to get support on other devices)
I dont like to update my system to the Beta... ( i am now running the latest Stable)

corbin wrote: ↑Wednesday 04 October 2017 11:11

fabiotodesco wrote: ↑Tuesday 03 October 2017 16:12 hi, sorry if i have a old question, but i not can add gateway in domoticz...i have all port open but the reponse of domoticz is

To test this, you should be sending to the multicast address 224.0.0.50, not 192.168.134.250. I'm guessing you tried that first but changed to the actual device IP because the multicast address wasn't working, and if that is the case it is probably your Windows firewall blocking it, or your router/network configuration not working with multicast.

If I understand correctly, you send order to the gateway through multicast ?
That's why when I have my second gateway turned on I have errors messages telling my that the key isn't correct ?
The second gateway isn't configured in Domoticz.

Is there a way to not have anwser from the second gateway ?

I also have problem with lux sensor of the gateway. Before i was controlling lights with that sensor now it´s not working. The sensor in gateway is very good the one in 6in1 sensor from Aeotec is terrible. I don´t know if is becasue for new domoticz version or firmware in gateway. All other sensor is working.

chatainsim wrote: ↑Thursday 05 October 2017 10:21 If I understand correctly, you send order to the gateway through multicast ?

Commands are not sent multicast, they are sent direct to the IP of the gateway. Multiple gateways should make no difference to this, regardless of if the additional gateway is configured in Domoticz. The correct key should be returned by matching the IP address of the gateway you have configured in Domoticz, so don't know why you are having this problem.

fabiotodesco wrote: ↑Wednesday 04 October 2017 13:22 HI, thanks for te answer but the firewalll of windows is disable, but i have a mikrotik firewall thath control the network. i don't understand this multicast story can you explain me?

Thanks a lot

Can't help you specifically with your hardware, but you can test on your windows pc by running wireshark and see if the UDP packets are visible on your network. Example of a UDP packet when clicking a Xiaomi button: