Avidsen doorbell (Hornbach)

[gdekeijzer]

Hi,

Does anybody know if the Avidsen doorbell will work on RFXCOM?
It uses the 433mhz channel.

Regards

[gdekeijzer]

These are the codes and the device itself

[b_weijenberg]

This device is not in the supported list, see chapter 2 of the RFXtrx User Guide.
However, you can try with RFXmngr and enable only Lighting4 or with an RFXtrx433E try also with only ByronSX enabled.

[gdekeijzer]

Ok, got some output in RFXmgr

chimed 2 times:
0913001500000000D580
Packettype = Lighting4
subtype = PT2262
Sequence nbr = 21
Code = 000000
S1- S24 = 0000 0000 0000 0000 0000 0000
Pulse = 213 usec
Signal level = 8
------------------------------------------------
0913001600000000D880
Packettype = Lighting4
subtype = PT2262
Sequence nbr = 22
Code = 000000
S1- S24 = 0000 0000 0000 0000 0000 0000
Pulse = 216 usec
Signal level = 8

Now to create a lighting4 switch in Domoticz.

[b_weijenberg]

I suppose the message cannot be used because a RF packet with all zeroes is received.

[gdekeijzer]

My thoughts exactly. However, a PT2262 device was suddenly in my unused devices list, around 300 times...
(ok, havent been there awhile, but )

I'm moving on ..