No switches on Master visible

happyman · Post by **happyman** » Wednesday 13 July 2016 8:13

Hi,

I try to work with two raspbarry boards. One is a 2b as master, the other is a 3b set as slave.
Both set with the same SD image and updated to the same Beta version.
Slave is using An USB zwave stick and an Piface board.

In the slave I created a user and set the devices.
In the log the connection is established. So far, so good.

The problem is that in the master only one switch is shown. The others are not.
Whatever I try, it only shows one.

Anyone an idea what goes wrong?

Derik · Post by **Derik** » Wednesday 13 July 2016 8:18

Allow new hardware/sensors on?

happyman · Post by **happyman** » Wednesday 13 July 2016 8:33

Derik wrote:Allow new hardware/sensors on?

It's not on, but released for 5min server all times.

Derik · Post by **Derik** » Wednesday 13 July 2016 8:38

happyman wrote:
Derik wrote:Allow new hardware/sensors on?
It's not on, but released for 5min server all times.

Put it on.
And wait a longer time.
Switch in that time the device..

happyman · Post by **happyman** » Wednesday 13 July 2016 16:59

After 24hrs the switches are vissible

No switches on Master visible Topic is solved

No switches on Master visible

Re: No switches on Master visible

Re: No switches on Master visible

Re: No switches on Master visible

Re: No switches on Master visible

Who is online