Hi everyone,
Time to time some of my events change his color to purple and stop working with the following message:
Error: EventSystem: Device no. '148' used in event 'Luz terraza_1' no longer exists, disabling event!
Error: EventSystem: Device no. '35' used in event 'Luz pasillo_2' no longer exists, disabling event!
Error: EventSystem: Device no. '74' used in event 'Alarma OFF_1' no longer exists, disabling event!
I made a research and the error is because the device disappeared but in this case its not what happend.
The devices are still there and if I reactive the events all works like always.
So I can´t find the problem.
Anyone have a clue?
regards
event disabled
Moderator: leecollings
-
- Posts: 45
- Joined: Tuesday 26 May 2015 22:49
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Argentina
- Contact:
event disabled
Razberry + 4 Eversrping HSM02 + 2 Aeotec Multi-Sensor + 1 Aeotec Micro Dimmer + 4 Aeotec Micro Smart Energy Switch, 2nd + 1 Remotec ZXT-120 + 1 Aeotec Smart Energy Monitor + 1 Everspring SE812 indoor Siren + 2 fibaro motion sensor + Aeotec water sensor
-
- Posts: 45
- Joined: Tuesday 26 May 2015 22:49
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Argentina
- Contact:
Re: event disabled
It's happened again!!!
For some reason same events disabled by it self.
Please i need some help i can't figure out why
For some reason same events disabled by it self.
Please i need some help i can't figure out why
Razberry + 4 Eversrping HSM02 + 2 Aeotec Multi-Sensor + 1 Aeotec Micro Dimmer + 4 Aeotec Micro Smart Energy Switch, 2nd + 1 Remotec ZXT-120 + 1 Aeotec Smart Energy Monitor + 1 Everspring SE812 indoor Siren + 2 fibaro motion sensor + Aeotec water sensor
-
- Posts: 21
- Joined: Monday 14 December 2015 15:12
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: event disabled
Blocky has the Probmel too.
Samme Problem
Samme Problem
-
- Posts: 2
- Joined: Wednesday 07 October 2015 9:35
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V3.4834
- Location: Netherlands
- Contact:
Re: event disabled
Also have the same problem. I have made some dummy switches, so these can't disappear. I created a blocky, when switch-1=on or switch-2=on then set switch-3=on. Also created another blocky, switch-1=off and switch-2=off then set switch-3=off.
For some reason i get this error in the log:
Error: EventSystem: Device no. '168' used in event 'GastenAanwezig_1' no longer exists, disabling event!
Any ideas?
For some reason i get this error in the log:
Error: EventSystem: Device no. '168' used in event 'GastenAanwezig_1' no longer exists, disabling event!
Any ideas?
Raspberry Pi2, Razberry, Fibaro switches, RFXcom433, KiKa
- Domosapiens
- Posts: 232
- Joined: Wednesday 20 August 2014 12:08
- Target OS: Windows
- Domoticz version: V3.5981
- Location: NL
- Contact:
Re: event disabled
I have seen, that after creating a dummy switch, Domoticz has to be restarted, to be able to use that dummy switch.
Don't know why.
But .. I'm running currently an old version !
Don't know why.
But .. I'm running currently an old version !
Win Vista&7; 1#Aeon Z-Stick S2; 1#Aeotec Z-Sick Gen5, 6#Fib.FGBS001; 24#DS18B20; 8#Everspr.AN158-2; 3#Philio PAN04; 1#Philio PAN06, 1#YouLess El; 1#Fib.FGWPE; 1#ZME_RC2; 2#FAK_ZWS230, 2#Quib.ZMNHCDx, 1#Quib.ZMNHDD1, 7#EM6555
-
- Posts: 2
- Joined: Wednesday 07 October 2015 9:35
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V3.4834
- Location: Netherlands
- Contact:
Re: event disabled
Rebooting domoticz seems to solve the problem. Switches responding as should now. Running Domoticz version 3.4834 on a Pi2.
Raspberry Pi2, Razberry, Fibaro switches, RFXcom433, KiKa
Who is online
Users browsing this forum: No registered users and 0 guests