Door sensor

[ottoangel]

I have bought this one: http://www.aliexpress.com/item/Free-shi ... 25731.html

Domoticz register it as an Chuango.

The problem is that nothing happens when I'm triggering it. I don't really now what switch type I should set it as.

I have made an blockly event so that it should turn on an outlet and turn on a lamp. According to the log things happen and under switches it turns on and so do the outlet but nothing happens in the real world. If I manually press the icon on the detector it turns on and the lamp also turns on but when triggering the sensor nothing happens. Maybe it works sometimes.

Any ideas?

[Stuntteam]

Hi,

It is a door contact. Normally you can set it as a contact.
However, it is important to check if the sensor sends 1 or 2 signals. With that I mean if it sends open and close as seperate signals or only sends an open signal.

[ottoangel]

It seems to send just one signal so I have set 'off' with a 10 second delay.

[ottoangel]

If I restart Domoticz it seems to work for a while. It also seems that I got lots of double devices.

Maybe it isn't better than this?

[Stuntteam]

See pm.