I've just received one of these -
http://www.ebay.co.uk/itm/231634367865? ... EBIDX%3AIT
and can confirm that it worked immediately with Rfxcom as Lighting4 PT2262
The remote created 2 devices: one for 'ON' and the other for ...... 'OFF'.
I chose the 5V version so I can run it from USB power.
Good Chinese remote + relay
Moderator: leecollings
- Westcott
- Posts: 423
- Joined: Tuesday 09 December 2014 17:04
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: UK - Glos
- Contact:
Good Chinese remote + relay
Zwave - Sigma Z+ stick, Fibaro, Horstmann, Neo Coolcam, EUROtronic
RFlink - IR detectors and temperatures
Wifi - YeeLights, ESP32s, Anoop sockets
Zigbee - lots with zigbee2mqtt and ZbBridge
RFlink - IR detectors and temperatures
Wifi - YeeLights, ESP32s, Anoop sockets
Zigbee - lots with zigbee2mqtt and ZbBridge
-
deennoo
- Posts: 784
- Joined: Wednesday 10 December 2014 13:06
- Target OS: Linux
- Domoticz version: beta
- Location: Bordeaux France
- Contact:
Re: Good Chinese remote + relay
Thx !
Domoticz stable 3.5877 for real & Domoticz beta for test
Rfxtrxe / RFLink / Milight / Yeelight / Tasmota / MQTT / BLE / Zigate
http://domo-attitude.fr
Rfxtrxe / RFLink / Milight / Yeelight / Tasmota / MQTT / BLE / Zigate
http://domo-attitude.fr
-
ricorico94
- Posts: 94
- Joined: Monday 26 October 2015 10:41
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Good Chinese remote + relay
Hi,
What is the 'receive distance" of the remote ? (ie is it still received by your Domoticz/RFXCOM far away from the remote control ?)
Also, do you know if either the relay or the remote can be de-coupled, so that they can work independetely ? (so far the remote directly triggers the relay, correct ? I'd like to have the relay and the remote communicating separately with Domoticz)
br,
Ricorico94
What is the 'receive distance" of the remote ? (ie is it still received by your Domoticz/RFXCOM far away from the remote control ?)
Also, do you know if either the relay or the remote can be de-coupled, so that they can work independetely ? (so far the remote directly triggers the relay, correct ? I'd like to have the relay and the remote communicating separately with Domoticz)
br,
Ricorico94
- Westcott
- Posts: 423
- Joined: Tuesday 09 December 2014 17:04
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: UK - Glos
- Contact:
Re: Good Chinese remote + relay
Hi RiciRico94,
Sorry, I haven't tried any range tests, but the range via the RFXcom must be greater due to its higher-gain aerial/antenna.
I believe that they are factory paired, but again have not yet tested that.
If the relay and the remote are both within range of the RFXcom, but out of range between them, then they are effectively decoupled.
Sorry, I haven't tried any range tests, but the range via the RFXcom must be greater due to its higher-gain aerial/antenna.
I believe that they are factory paired, but again have not yet tested that.
If the relay and the remote are both within range of the RFXcom, but out of range between them, then they are effectively decoupled.
Zwave - Sigma Z+ stick, Fibaro, Horstmann, Neo Coolcam, EUROtronic
RFlink - IR detectors and temperatures
Wifi - YeeLights, ESP32s, Anoop sockets
Zigbee - lots with zigbee2mqtt and ZbBridge
RFlink - IR detectors and temperatures
Wifi - YeeLights, ESP32s, Anoop sockets
Zigbee - lots with zigbee2mqtt and ZbBridge
Who is online
Users browsing this forum: No registered users and 1 guest