[523] SUPPORT FOR SOLARMAX PV-INVERTER
Moderators: leecollings, remb0
[523] SUPPORT FOR SOLARMAX PV-INVERTER
Hi, not sure whether I understood the posting rules while posting a tracker first. Appologies if I'm doing wrong!
I was stunned reading about the SolarEdge Support in this forum. Beside a SolarEdge Inverter I'm also running a SolarMax Inverter that comes with a simple LAN UDP-Interface. I've done an implementation in Delphi. All you need to do is sending a UDP request string to the inverters IP on a specific port (12345 in my case). The inverters respons string sends the values of the requested data fields in ascii. This is a example:
Send: '{FB;01;1E|64:KDY;KT0;PAC|0672}'
Receive: 'KDY=A3;KT0=1689;PAC=570'
The values are in hex.
KDY=energy today in Wh
KT0=energy total (energy produced since installation or reset )
PAC=AC current power
There are a lot more parameters that can be requested, however these are the ones that really matter to me. At http://blog.dest-unreach.be/2009/04/15/ ... ent-page-2 a more detailed discussion on the protocoll can be found. I'd be hayppy to do any testing on experimental code or could even expose my SolarMax to the internet for testing purposes. Unfortunatly it's only responding during power production. So no chance to test at night .
I was stunned reading about the SolarEdge Support in this forum. Beside a SolarEdge Inverter I'm also running a SolarMax Inverter that comes with a simple LAN UDP-Interface. I've done an implementation in Delphi. All you need to do is sending a UDP request string to the inverters IP on a specific port (12345 in my case). The inverters respons string sends the values of the requested data fields in ascii. This is a example:
Send: '{FB;01;1E|64:KDY;KT0;PAC|0672}'
Receive: 'KDY=A3;KT0=1689;PAC=570'
The values are in hex.
KDY=energy today in Wh
KT0=energy total (energy produced since installation or reset )
PAC=AC current power
There are a lot more parameters that can be requested, however these are the ones that really matter to me. At http://blog.dest-unreach.be/2009/04/15/ ... ent-page-2 a more detailed discussion on the protocoll can be found. I'd be hayppy to do any testing on experimental code or could even expose my SolarMax to the internet for testing purposes. Unfortunatly it's only responding during power production. So no chance to test at night .
- gizmocuz
- Posts: 2350
- Joined: Thursday 11 July 2013 18:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Top of the world
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
Could it be that in the forum they talk about TCP ? (Not UDP)
you might be able to write a small bash file that reads the values,
and then send it to domoticz via the json interface
It might also be possible that SBFSpot supports this inverter? We do have an SBFSpot implementation in domoticz
you might be able to write a small bash file that reads the values,
and then send it to domoticz via the json interface
It might also be possible that SBFSpot supports this inverter? We do have an SBFSpot implementation in domoticz
Quality outlives Quantity!
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
You're right, it's TCP. I already wrote a small program that updates domoticz via the json interface. However I'd find it great to have a native support for that. SBFSpot seems to support SMA inverters only.gizmocuz wrote:Could it be that in the forum they talk about TCP ? (Not UDP)
you might be able to write a small bash file that reads the values,
and then send it to domoticz via the json interface
It might also be possible that SBFSpot supports this inverter? We do have an SBFSpot implementation in domoticz
- gizmocuz
- Posts: 2350
- Joined: Thursday 11 July 2013 18:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Top of the world
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
Could you upload your script file ?
Quality outlives Quantity!
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
Shure. It's not a script but part of a Delphi program I wrote my own small home automation with:gizmocuz wrote:Could you upload your script file ?
Code: Select all
procedure TMain.SolarSocketWrite(Sender: TObject;
Socket: TCustomWinSocket);
begin
Socket.SendText('{FB;01;1E|64:KDY;KT0;PAC|0672}');
end;
procedure TMain.SolarSocketRead(Sender: TObject; Socket: TCustomWinSocket);
var Data : string;
FUNCTION TMain.GetStrComponent(Comp : BYTE; Separator : CHAR; Line : STRING) : STRING;
VAR CharCount : BYTE;
Count : BYTE;
BEGIN
CharCount := 1;
WHILE (CharCount <= Length(Line)) AND (Comp > 1) DO
BEGIN
IF Line[CharCount] = Separator THEN
BEGIN
Dec(Comp);
END;
Inc(CharCount);
END;
Count := System.Pos(Separator, Copy(Line, CharCount, Length(Line)));
IF Count = 0 THEN
Count := Length(Line)
ELSE
Dec(Count);
GetStrComponent := Copy(Line, CharCount, Count);
END;
FUNCTION HexStrToInt(InStr : STRING) : Integer;
VAR Count : Integer;
Res : Integer;
BEGIN
Res := 0;
FOR Count := 0 TO Length(InStr)-1 DO
BEGIN
IF UpCase(InStr[Length(InStr)-Count]) IN ['A'..'F'] THEN
Res := Res + Round(Power(16, Count)) * (Ord(UpCase(InStr[Length(InStr)-Count]))-ORD('A')+10);
IF InStr[Length(InStr)-Count] IN ['0'..'9'] THEN
Res := Res + Round(Power(16, Count)) * (Ord(InStr[Length(InStr)-Count])-Ord('0'));
END;
HexStrToInt := Res;
END;
function GetValue(Ident, Data : string) : Integer;
begin
Data := Copy(Data, System.Pos(Ident, Data)+Length(Ident), Length(Data));
if System.Pos(';', Data) > 0 then
Data := Copy(Data, 1, System.Pos(';', Data)-1);
Result := HexStrToInt(Data);
end;
begin
Data := Socket.ReceiveText;
Data := GetStrComponent(2, '|', Data);
Data := GetStrComponent(2, ':', Data);
Data := GetStrComponent(1, '|', Data);
edPVPAC.Text := FloatToStrF(GetValue('PAC=', Data)/2, ffGeneral, 7, 1);
PVPACLast := edPVPAC.Text;
edPVDay.Text := FloatToStrF(GetValue('KDY=', Data)/10, ffGeneral, 7, 1);
PVYearLast := IntToStr(GetValue('KT0=', Data));
try
UpdateDomoticz(DOMOTICZ_URL+'type=command¶m=udevice&idx=10&nvalue=0&svalue='+edPVPAC.Text+';'+FloatToStrF(GetValue('KDY=', Data)*100, ffGeneral, 7, 1));
except
end;
if (edPVPACmax.text = '') or (edPVPACmax.text = '-') then
edPVPACmax.text := PVPACLast
else
if (edPVPACmax.text <> '') and (edPVPACmax.text <> '-') and (PVPACLast <> '') and (PVPACLast <> '-') then
if StrToFloat(edPVPACmax.text) < StrToFloat(PVPACLast) then
edPVPACmax.text := edPVPAC.Text;
edPVYear.Text := PVYearLast;
SolarSocket.Close;
end;
- gizmocuz
- Posts: 2350
- Joined: Thursday 11 July 2013 18:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Top of the world
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
Send you an email, think i'm almost done
Quality outlives Quantity!
- sincze
- Posts: 1299
- Joined: Monday 02 June 2014 22:46
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.4
- Location: Netherlands / Breda Area
- Contact:
Re: [523] SUPPORT FOR OMNIK PV-INVERTER
HI gizmocuz
Would it be hard to have Omnik inverters available in the same way?
Currently it can be done using a script as described here: http://www.domoticz.com/wiki/Omnik_Solar_Inverter
Send a magic packet and the machine will spit out the data
tnx.
Any assisstance needed, please let me know.
Sándor
Would it be hard to have Omnik inverters available in the same way?
Currently it can be done using a script as described here: http://www.domoticz.com/wiki/Omnik_Solar_Inverter
Send a magic packet and the machine will spit out the data
tnx.
Any assisstance needed, please let me know.
Sándor
Pass2php
LAN: RFLink, P1, OTGW, MySensors
USB: RFXCom, ZWave, Sonoff 3
MQTT: ZIgbee2MQTT,
ZWAVE: Zwave-JS-UI
WIFI: Mi-light, Tasmota, Xiaomi Shelly
Solar: Omnik, PVOutput
Video: Kodi, Harmony HUB, Chromecast
Sensors: You name it I got 1.
LAN: RFLink, P1, OTGW, MySensors
USB: RFXCom, ZWave, Sonoff 3
MQTT: ZIgbee2MQTT,
ZWAVE: Zwave-JS-UI
WIFI: Mi-light, Tasmota, Xiaomi Shelly
Solar: Omnik, PVOutput
Video: Kodi, Harmony HUB, Chromecast
Sensors: You name it I got 1.
-
- Posts: 402
- Joined: Wednesday 26 February 2014 15:28
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: the Netherlands
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
Same for my SamilPower inverter, I currently use this perl script described here.
I use a RS232 to USB cable.
I'm not a programmer but maybe I can make it more easy to implement, but don't now what suits best for you?
I use a RS232 to USB cable.
I'm not a programmer but maybe I can make it more easy to implement, but don't now what suits best for you?
- FlyinGNL
- Posts: 6
- Joined: Monday 26 October 2015 12:41
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: 's-Heerenberg Netherlands
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
Is it possible to get a more exact reading from a solarmax inverter?
Now the day readings are in 1 kWh. Would be nice when it's in 0,1kWh output if not too much trouble
Now the day readings are in 1 kWh. Would be nice when it's in 0,1kWh output if not too much trouble
-
- Posts: 1601
- Joined: Friday 18 October 2013 23:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Arnhem/Nijmegen Nederland
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
WOW
How many solarpanels do you have...
Pinctures???
How many solarpanels do you have...
Pinctures???
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
- FlyinGNL
- Posts: 6
- Joined: Monday 26 October 2015 12:41
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: 's-Heerenberg Netherlands
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
numbers doesn't count
-
- Posts: 3
- Joined: Saturday 05 January 2019 19:18
- Target OS: NAS (Synology & others)
- Domoticz version:
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
I got a Solarmax 3000S
I activate in the front panel the ethernet interface and add it to Domoticz
and nothing...
do I have to do something else?
do I have to implement something?
my Domoticz is on a raspberry Pie and update
don't I supposed to get all the drivers with?
there's 2 ethernet plug in my Solarmax 3000S and description seems to give them both as working
could U help me with this hardware please
I activate in the front panel the ethernet interface and add it to Domoticz
and nothing...
do I have to do something else?
do I have to implement something?
my Domoticz is on a raspberry Pie and update
don't I supposed to get all the drivers with?
there's 2 ethernet plug in my Solarmax 3000S and description seems to give them both as working
could U help me with this hardware please
- Attachments
-
- Image 12-01-2019 à 16.13.jpg (48.4 KiB) Viewed 3294 times
-
- Posts: 1
- Joined: Sunday 29 March 2020 14:49
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
hi, before i saw the current watt and the total day kwh and total all time kwh , but after a complete new installation i dont see total of all time anymore on the dashboard or utility. the total value is visible in devices.
How can i fix this?
How can i fix this?
-
- Posts: 1
- Joined: Sunday 28 June 2020 15:39
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
Hello, i have connected my solarmax TP-series to domoticz, but only recieve errors.
----------
2020-06-28 16:33:30.362 Error: solarmax hardware (3) thread seems to have ended unexpectedly
2020-06-28 16:33:44.365 Error: solarmax hardware (3) thread seems to have ended unexpectedly
2020-06-28 16:33:48.541 Error: SolarMax: TCP/IP connection closed! retrying in 30 seconds...
2020-06-28 16:33:58.368 Error: solarmax hardware (3) thread seems to have ended unexpectedly
2020-06-28 16:34:18.544 Status: SolarMax: TCP connected to: 192.168.178.42:12345
--------
anyone recognizes this and has an solution?
thnx in advance
regards,
wilfred
----------
2020-06-28 16:33:30.362 Error: solarmax hardware (3) thread seems to have ended unexpectedly
2020-06-28 16:33:44.365 Error: solarmax hardware (3) thread seems to have ended unexpectedly
2020-06-28 16:33:48.541 Error: SolarMax: TCP/IP connection closed! retrying in 30 seconds...
2020-06-28 16:33:58.368 Error: solarmax hardware (3) thread seems to have ended unexpectedly
2020-06-28 16:34:18.544 Status: SolarMax: TCP connected to: 192.168.178.42:12345
--------
anyone recognizes this and has an solution?
thnx in advance
regards,
wilfred
-
- Posts: 18
- Joined: Sunday 08 November 2020 8:29
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
One of the reasons I chose Domoticz was the inbuilt support for SolarMax inverters. I connected my inverter and it works really well.
Only problem... when the sun goes down Domoticz continues to try and poll the inverter. See here...
Is there a method of telling Domoticz to stop polling the inverter at certain times of the day, such as during the times where there is no sunshine?
Only problem... when the sun goes down Domoticz continues to try and poll the inverter. See here...
Code: Select all
2020-11-14 22:10:26.220 Error: SolarMax: TCP could not connect to: <IPADDRESS>:12345
2020-11-14 22:10:26.221 Status: SolarMax: retrying in 30 seconds...
-
- Posts: 10
- Joined: Tuesday 21 February 2023 18:42
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
Is this Plugin Solarmax with Lan working for SMT Series as well?
Greetings
Greetings
-
- Posts: 1
- Joined: Thursday 01 February 2024 14:46
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: [523] SUPPORT FOR SOLARMAX PV-INVERTER
I had the same issue. I changed the address in the settings of my inverter to 001
Then did "sudo service domoticz. sh restart" and then it worked.
Even though the answer is rather late, i hope it is helpful.
Who is online
Users browsing this forum: No registered users and 1 guest