GW PowerNode 1 port - "usage,electric" seen twice in devices

For Z-Wave related questions in Domoticz

Moderator: leecollings

Post Reply
darkis
Posts: 2
Joined: Sunday 10 January 2016 11:10
Target OS: Linux
Domoticz version: 2.4031
Contact:

GW PowerNode 1 port - "usage,electric" seen twice in devices

Post by darkis »

Hello everyone!

My first post in this forum and it is regardin the greenwave powernode 1 port switch and energy meter.

I am running Raspberry PI, Domoticz version 2.4031 (beta channel) and the razberry controller.
I am using openzwave via USB to control razberry and the zwave network.



The only problem I have right now (2x multisensors working fine) is that the greenwave powernode 1 port reports the electric usage twice in watts. I would expect one device to show up as electric, KWH or similar. Instead i have two devices that reports exactly the same thing. I have tried to exclude/include the device several times, but no change.

Also, in the openzwave control panel the values are reported properly, one for watt usage, one for kwh usage.

I am attaching 3 screenshots from the hardware tab, device list and the openzwave control panel for further info on what I am seeing.





Any thoughts?

Thank you and regards
/Fredrik
Attachments
hardware -> openzwave -> setup
hardware -> openzwave -> setup
hardware.PNG (13.22 KiB) Viewed 1560 times
devices.PNG
devices.PNG (4.24 KiB) Viewed 1560 times
openzwave control panel.PNG
openzwave control panel.PNG (8.7 KiB) Viewed 1560 times
Jurik
Posts: 7
Joined: Saturday 27 June 2015 2:05
Target OS: Raspberry Pi / ODroid
Domoticz version: latest
Contact:

Re: GW PowerNode 1 port - "usage,electric" seen twice in dev

Post by Jurik »

I have the same culprit in latest beta. Somehow the first greenwave device (1 socket) worked out of the box. After an upgrade all of a sudden a kWh meter was there (the one with the fancy bars and the one i want.)

Next day i installed a greenwave 6 powernode. Only after an initial powerloss and reconnect/heal i got a kWH meter as above.

BUT! when i installed the second identical greenwave 6 power node. Only 2 watt meters are there (no kwh meter with the fancy bars)

How can i solve this or reinit or something?
darkis
Posts: 2
Joined: Sunday 10 January 2016 11:10
Target OS: Linux
Domoticz version: 2.4031
Contact:

Re: GW PowerNode 1 port - "usage,electric" seen twice in dev

Post by darkis »

Hello again!

This issue is solved for my part.

A restart of the system helped - when i came back into the panel for "Utility" I noticed that one of the watt meters didnt update any longer.
I checked the device list and now there is a KWH meter value available.

I am not sure what the issue was, but:
- 6 months uptime
- Moving away from Zway to openzwave without any restart.

Maybe some strange issue was triggered by this migration.


Regards
/Fredrik
Plantje
Posts: 451
Joined: Friday 16 October 2015 7:58
Target OS: Windows
Domoticz version:
Contact:

Re: GW PowerNode 1 port - "usage,electric" seen twice in devices

Post by Plantje »

Hi!

Thanks for this suggestion! I was having the same issue: my powernode 1 was only showing Watt and the possibility to switch on and off; no kWh. A reboot of the system fixed the issue.

Regards,
Rudi
racquemis
Posts: 73
Joined: Monday 02 November 2015 18:12
Target OS: Raspberry Pi / ODroid
Domoticz version:
Location: Netherlands
Contact:

Re: GW PowerNode 1 port - "usage,electric" seen twice in devices

Post by racquemis »

FYI There is a good reason there are two electric usage devices. One displays the current power consumption, the other the power consumption of the previous measurement.
Plantje
Posts: 451
Joined: Friday 16 October 2015 7:58
Target OS: Windows
Domoticz version:
Contact:

Re: GW PowerNode 1 port - "usage,electric" seen twice in devices

Post by Plantje »

Yes, I know and in my case (I think slightly different from what the TS started off with) I had only current power consumption and the switch option.
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest