Blockly examples

[cattoo]

Hi all,
I want my LUX sensor activate my lights between 15:00 and 22:30 when it goes below 60 Lux, and that part is working (ill think)
But when the time is between 06:00 and 09:00 ill want the motion sensor to handle the lights, but it does not work. What have i done wrong?

[StanHD]

Not sure but try "And" in place of "Or" for your time periods.

[mrf68]

Let's assume it is 12:00 hours and LUX < 60. Then read line 1:

If LUX < 60

that is true, so we continu reading the condition, and because of the OR statement that follows one of the conditions need to be true:
TIME >=15:00
that is not true, but because of the OR we need to check the second condition:
TIME <=22:30
that is true, so it will activate the lights.

Try time = 17:00 hours, then both time conditions are true.
Try time = 23:19 hours, then the first condition (TIME >=15:00) is true.

In my opinion this part will always be true. Same goes for the second part of the script with the Motion sensor.

I must say I make this mistake myself every now and then. And maybe my interpretation at this moment is not correct, please feel free to correct me.

[thecosmicgate]

Running this somebody home blokckly:

But the problem is that the virtual switch flips every second on and off .
As the ping script i'am running chopperRob's script.
As geofence tool we run the android domofence app.

Somebody who can tell me , why the somebody home switch is flipping ?

[thecosmicgate]

Running this somebody home blokckly:

But the problem is that the virtual switch flips every second on and off .
As the ping script i'am running chopperRob's script.
As geofence tool we run the android domofence app.

Somebody who can tell me , why the somebody home switch is flipping ?

Changed it:


but the somebody home switch keeps flipping on / off every second

[Skippiemanz]

I think if you change the 2nd or in else if to and it will work. Because all the devices have to be off for the system to turn iemand thuis off

[thecosmicgate]

I think if you change the 2nd or in else if to and it will work. Because all the devices have to be off for the system to turn iemand thuis off

Problem solved ...next

Sent from my MotoG3 using Tapatalk

[Richardsnel]

I created a Blockly script but how can i run it?

[thecosmicgate]

I created a Blockly script but how can i run it?

Domoticz does this for you

Sent from my MotoG3 using Tapatalk

[Skippiemanz]

If you marked the blockly as active

[Richardsnel]

I marked it as active but wil it run every our?

[djoeney]

FYI
Automate turning off AV devices in combination with Logitech Harmony HUB and z-wave power switch (could also be a KAKU device or whatever power switch you use).

The logic is when you turn off activity's with your remote control the poweroff switch is turned ON. When this happens you have 5 minutes after that the power switch is turned off. If you put the power switch back on you have 5 minutes to turn on an activity on the remote otherwise the switch is turned off again.

[doxikus]

Hi to all,

I try to create simple rule to send notification with blocky, I hope that someone can help me to pint right direction.

Rule will be something like this, if temperature is larger than some value send notification each 5 minutes. I use dummmy/virtual sensor so notification don't work on sensor notification settings. Right now I have this rule but it will send mail each minute. Domoticz is installed on synology.

blocky.jpg (43.42 KiB) Viewed 4840 times

Thanks

[Evelen]

Sending E-Mail when smokedetector is detecting smoke:


EDIT: And turing on lamp:

also video:

https://sendvid.com/tqnqdxcc

[MarcelMAH]

I'm trying to create a Blocky to toggle the dummy switch 'Someone home'.
If one of the 4 switches (2x Geo 2x ping) is on then 'Someone home' must me set on.

If none of the 4 switches is on then 'Someone home' must be set to off.

It's not working

SomeoneHome.png (81.79 KiB) Viewed 4740 times

[alfred_j_kwak]

If none of the switches are one then your AND part is ON not OFF.

[MarcelMAH]

If none of the switches are one then your AND part is ON not OFF.

You mean this one?

onoff.png (30.29 KiB) Viewed 4697 times

Changed it, still no go... it won't turn it on even when everything else is on.

[StanHD]

This one works for sure:-

[Westcott]

Hi StanHD,

How do you do your Galaxy Geofence?
DomoFence?

[StanHD]

Yes, Domo fence.