I am trying to get a Led that is integrated into a ir heater to operate with Domoticz via RFlink. Now I found that the original transmitter uses 433MHz fsk (Frequency Shift Keying) to send commands. Is this supported by RFLink?
Thx for your support.
is 433Mhz fsk supported on RFLink
Moderators: leecollings, Stuntteam
-
gizmocuz
- Posts: 3026
- Joined: Thursday 11 July 2013 18:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Top of the world
- Contact:
Re: is 433Mhz fsk supported on RFLink
Best to directly ask the designer/author of RFLink this question as it is hardware related
Quality outlives Quantity!
-
Loekie63
- Posts: 18
- Joined: Thursday 28 January 2021 9:13
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: is 433Mhz fsk supported on RFLink
And who would be the best man to ask this question then? I hope you know.
thx for your support.
thx for your support.
-
waltervl
- Posts: 7020
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2026.3
- Location: NL
- Contact:
Re: is 433Mhz fsk supported on RFLink
Check the contact page of rflink https://rflink.nl/donate.php
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
-
Loekie63
- Posts: 18
- Joined: Thursday 28 January 2021 9:13
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: is 433Mhz fsk supported on RFLink
Not much response there. 
-
gizmocuz
- Posts: 3026
- Joined: Thursday 11 July 2013 18:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Top of the world
- Contact:
Re: is 433Mhz fsk supported on RFLink
Maybe it is supported with a RFXCom transceiver like the RFXTrx433XL ?
Quality outlives Quantity!
-
b_weijenberg
- Posts: 524
- Joined: Friday 12 July 2013 18:13
- Target OS: -
- Domoticz version:
- Location: Netherlands
- Contact:
Re: is 433Mhz fsk supported on RFLink
The RFX-433EMC can use FSK but....
In most cases FSK is using packet mode and needs a special implementation of this protocol in the firmware.
It can also use encryption and in this case it is not possible to use it.
In most cases FSK is using packet mode and needs a special implementation of this protocol in the firmware.
It can also use encryption and in this case it is not possible to use it.
RFX-433, RFX-433EMC, RFX-868
-
andreo
- Posts: 47
- Joined: Friday 07 August 2015 21:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.3
- Location: Anna Paulowna, Netherlands
- Contact:
Re: is 433Mhz fsk supported on RFLink
The RF link operates at 433 MHz using OOK modulation.
https://en.wikipedia.org/wiki/On%E2%80%93off_keying
https://en.wikipedia.org/wiki/On%E2%80%93off_keying
Latest version of Domoticz and more running on Docker|Raspberry Pi 4-B 8GB Bookworm|RF-Link|Klik Aan Klik Uit|Nefit easy|ESPeasy|P1 power meter|S0PCM-5 through Ser2Net|Alecto WS5500|FrtizBox|Satel Integra|Solis
Greetz Andre.
Greetz Andre.