Long press 433 RFXcom

Moderator: leecollings

Post Reply
menno.vanmunster
Posts: 8
Joined: Thursday 28 August 2014 8:49
Target OS: Raspberry Pi / ODroid
Domoticz version: V4.9700
Contact:

Long press 433 RFXcom

Post by menno.vanmunster »

Hi,

I have a "standkachel" to use this there is e 433mhz remote, i can add them to domoticz
i can also use the + and - button to control the heater,
but.... to power on the heater, i must press the "on" button for 3 seconds, same to power off the heater.

How can i manage to send the power on/pff signal for 3 seconds with rfxcom and domoticz?
i have search but can find anything

i hope somebody can help me with this

Image
Image
b_weijenberg
Posts: 517
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Long press 433 RFXcom

Post by b_weijenberg »

If Domoticz supports transmit of RAW data you can use the repeat count to send packets for about 3 seconds.
RFXtrx433, RFXtrx433E, RFXtrx433XL, RFX433XL, RFX868XL
menno.vanmunster
Posts: 8
Joined: Thursday 28 August 2014 8:49
Target OS: Raspberry Pi / ODroid
Domoticz version: V4.9700
Contact:

Re: Long press 433 RFXcom

Post by menno.vanmunster »

I have searched to see if i can change the "puls" time in domoticz, but i can't find it

On signal
------------------------------------------------
Packettype = Lighting5
subtype = BBSB new
Sequence nbr = 132
ID = 0FB569 decimal:1029481
Unit = 5
Command = Off
Signal level = 7 -64dBm


Off signal
------------------------------------------------
Packettype = Lighting4
subtype = PT2262
Sequence nbr = 128
Code = FB5698 decimal:16471704
S1- S24 = 1111 1011 0101 0110 1001 1000
Pulse = 410 usec
Signal level = 7 -64dBm
b_weijenberg
Posts: 517
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Long press 433 RFXcom

Post by b_weijenberg »

Do not change the pulse time.
Repeat count is something different.
RFXtrx433, RFXtrx433E, RFXtrx433XL, RFX433XL, RFX868XL
b_weijenberg
Posts: 517
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Long press 433 RFXcom

Post by b_weijenberg »

I suppose you can use rfxsend.py https://github.com/ssjoholm/rfxcmd_gc
RFXtrx433, RFXtrx433E, RFXtrx433XL, RFX433XL, RFX868XL
menno.vanmunster
Posts: 8
Joined: Thursday 28 August 2014 8:49
Target OS: Raspberry Pi / ODroid
Domoticz version: V4.9700
Contact:

Re: Long press 433 RFXcom

Post by menno.vanmunster »

b_weijenberg wrote: Tuesday 21 November 2023 11:53 I suppose you can use rfxsend.py https://github.com/ssjoholm/rfxcmd_gc
Can you help me with this?
I realy do not know how this work
b_weijenberg
Posts: 517
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Long press 433 RFXcom

Post by b_weijenberg »

RFXtrx433, RFXtrx433E, RFXtrx433XL, RFX433XL, RFX868XL
menno.vanmunster
Posts: 8
Joined: Thursday 28 August 2014 8:49
Target OS: Raspberry Pi / ODroid
Domoticz version: V4.9700
Contact:

Re: Long press 433 RFXcom

Post by menno.vanmunster »

b_weijenberg wrote: Tuesday 28 November 2023 11:25 viewtopic.php?t=27260
Thanks!
I wil test is
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests