Control a garage port with Arduino via Domoticz Topic is solved

[LordMax]

Hi!

I am trying to control my garage port with an Arduino. I have a Domoticz windows server running controlling all lights and sensors in my house and I want to add my garage port to the system, the gate works like if it gets a puls it opens/closes and if it gets another pulse while opening/closing it stops, then goes the reversed way. I have a Relay to control the pulse but how do I "connect" it to domoticz?

Thanks beforehand!
Best regards Max

[waltervl]

What kind of wireless gateways to Domoticz do you have? Because that save you some money to buy a new gateway. Wifi is off course 1 of the possibility but there is also zigbee, zwave, RF etc.

[zygios]

You need Arduino with Ethernet shield + Relay or more simple would be to buy ESP8266 and connect relay (on ESP8266 install espeasy firmware with works perfectly with Domoticz.

[LordMax]

I have a Arduino D1 Mini Pro (based on ESP-8266EX) and a relay

[waltervl]

If it is compatible with ESPEASY you have a domoticz interface with that.

[LordMax]

Ok, I will give it a try! Wish me good luck

[LordMax]

I just got it working! I had to wait for the arduino. It was easy to setup and works flawless. Thanks for the help!

[waltervl]

Good to hear! What was your method you used, with Espeasy?

[tvurce]

How to do that without espeasy? Because i have on this esp32 another sensors etc. reporting to domoticz and i want to drive relay with the same esp32 through domoticz.