Hello,
I try to figure out what's going on. I create config file for this device on openzwave. On the zwave console everything is working as expected. But on domoticz I have some issues.
First, I can't change the mode of the thermostat. You can check the utility page I have :
I can only change the mode by editing manually like :
Second, I can't see the stat of the thermostat on normal mode. See image bellow :
But I see it on the device list.
Can somebody help me solve my issue ?
Best regards,
Julien Ithurbide
Thermostat heatit z-temp2 not showing correctly
Moderator: leecollings
-
- Posts: 1
- Joined: Tuesday 27 October 2020 8:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Thermostat heatit z-temp2 not showing correctly
I have 4 heatit z-temp2 and z-water controller have not solved to get system work in domoticz nevest beta 2020.2 built 12976 zwater makes 10 instance switches and 4 airtemp instance
Not all switches responds to comands get timout from controller node
Thermostats get included 3 itemes setpoint .operate state. And mode
Therpostat only comunicated during include after included no new comminication registred in log ewen when try set point on thermostat no changes same not able to change setpount . Or mode in domoticz
Any got this heatit z-temp2 battery operated to work
Sent from my iPhone using Tapatalk
Not all switches responds to comands get timout from controller node
Thermostats get included 3 itemes setpoint .operate state. And mode
Therpostat only comunicated during include after included no new comminication registred in log ewen when try set point on thermostat no changes same not able to change setpount . Or mode in domoticz
Any got this heatit z-temp2 battery operated to work
Sent from my iPhone using Tapatalk
-
- Posts: 22
- Joined: Tuesday 23 February 2016 20:16
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Thermostat heatit z-temp2 not showing correctly
Hi everyone,
any news about this issue (that, by the way, seems to be more an Openzwave issue than a domoticz issue) ?
I'd like to buy a Heatit z-temp2 to replace my Danfoss, but I can't find any information about the fact that this device is now supported or not.
Thanks
any news about this issue (that, by the way, seems to be more an Openzwave issue than a domoticz issue) ?
I'd like to buy a Heatit z-temp2 to replace my Danfoss, but I can't find any information about the fact that this device is now supported or not.
Thanks
-
- Posts: 7
- Joined: Monday 10 May 2021 14:34
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Thermostat heatit z-temp2 not showing correctly
Hi,
has anyone been able to get the Heatit Temp2 to work with domoticz?
has anyone been able to get the Heatit Temp2 to work with domoticz?
-
- Posts: 7
- Joined: Monday 10 May 2021 14:34
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Thermostat heatit z-temp2 not showing correctly
I replaced the heatit204.xml in the /home/pi/domoticz/Config/thermofloor directory with the one attached.
Seems to be working now.
Currently running Domoticz 2022.1 (build 14127)
Seems to be working now.
Currently running Domoticz 2022.1 (build 14127)
Who is online
Users browsing this forum: No registered users and 0 guests