[MyDomoAtHome] Support thread

[mcwieger]

I still have nightly crashes, which is getting annoying. I checked usage.log and see the following:

Code: Select all

{"level":"info","message":"Refreshing version cache: v0.2.39","timestamp":"2020-02-09T14:40:48.501Z"}
{"level":"info","message":"Domoticz server: http://127.0.0.1:8084/json.htm","timestamp":"2020-05-27T12:57:03.723Z"}
{"level":"info","message":"Node version: 12.14.0","timestamp":"2020-05-27T12:57:03.816Z"}
{"level":"info","message":"MDAH version: MyDomoAtHome 0.2.39","timestamp":"2020-05-27T12:57:03.816Z"}
{"level":"info","message":"OS version: Linux linux 3.2.40","timestamp":"2020-05-27T12:57:03.818Z"}
{"level":"info","message":"Hostname: NAS 192.168.2.201 in /root /root","timestamp":"2020-05-27T12:57:03.874Z"}
{"level":"info","message":"Refreshing version cache: v0.2.41","timestamp":"2020-05-27T12:57:06.694Z"}
{"level":"info","message":"Domoticz server: http://127.0.0.1:8084/json.htm","timestamp":"2020-05-28T07:18:22.463Z"}
{"level":"info","message":"Node version: 12.14.0","timestamp":"2020-05-28T07:18:23.993Z"}
{"level":"info","message":"MDAH version: MyDomoAtHome 0.2.39","timestamp":"2020-05-28T07:18:23.994Z"}
{"level":"info","message":"OS version: Linux linux 3.2.40","timestamp":"2020-05-28T07:18:23.996Z"}
{"level":"info","message":"Hostname: NAS 192.168.125.1 in /root /root","timestamp":"2020-05-28T07:18:24.108Z"}

Two things I notice:
- Hostname: NAS 192.168.125.1: this is from my address range I configured for OpenVPN and is the starting IP address that's assigned when connecting to my Synology via VPN. Why is it appearing in the MDAH log? I haven't used VPN to connect to MDAH or even Domoticz recently.
- Version cache says v0.2.41 while I'm on version 0.2.39. How did this happen?

[teo1966]

this version node-mydomoathome-0.2.42 dont start on my ds916+

[Sopalin]

Hi,

I'm currently migrating to Archlinux and i was wondering if MyDomoAtHome will work on this OS.

Thanks.

[epierre]

yes this is pure nodejs.

IP is the one answered by the OS, fon't know if multiple is well managed.

Cache version is the latest available based on github

[Micha]

Happy new year,

I'm trying to install mydomoathome and I'm getting following:

pi@raspberrypi:~ $ wget -qO - http://www.e-nef.com/domoticz/mdah/gpg.mykey | sudo apt-key add -
OK
pi@raspberrypi:~ $ sudo apt-get update
Ign:1 http://www.e-nef.com/domoticz/mdah InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Err:3 http://www.e-nef.com/domoticz/mdah Release
404 Not Found [IP: 164.132.235.17 80]
Hit:4 http://archive.raspberrypi.org/debian buster InRelease
Reading package lists... Done
E: The repository 'http://www.e-nef.com/domoticz/mdah Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.


Does anybody have an idea? I tried with http and https

Kind Regards

[epierre]

try this instead:

deb https://www.e-nef.com/domoticz/mdah/ buster contrib

[Knight]

Hello, i need support with a new install. I have installed Bulleseye on a new Rasp 4 with the newest domoticz

When i try to install MyDomoAtHome a get this problem.

I get this error "MyDomoAtHome not found" when i type sudo apt-get install MyDomoAtHome


pi@raspberrypi:~ $ sudo apt-get install MyDomoAtHome
Läser paketlistor… Färdig
Bygger beroendeträd… Färdig
Läser tillståndsinformation… Färdig
E: Kunde inte hitta paketet MyDomoAtHome


I also tried to install by download the package but I can't find the execute command to install it,

Open Terminal
Extract the .tar.gz or (.tar.bz2) file with the following commands
tar xvzf MyDomoAtHome-0.2.45.tar.gz
Navigate to the extracted folder using cd command
cd MyDomoAtHome-0.2.45
Now run the following command to install the tarball
./configure (When i type this i get error "File not found" )
make
sudo make install

Can someone help me?

[epierre]

if you have the .deb in local it is :

sudo dpkg -i MyDomoAtHome-xxxxx.deb

[Knight]

if you have the .deb in local it is :

sudo dpkg -i MyDomoAtHome-xxxxx.deb

Where can i download MyDomoAtHome-xxxxx.deb ?

I only found these https://github.com/empierre/MyDomoAtHom ... ag/v0.2.45


Thank you !

[epierre]

it is here: https://www.e-nef.com/domoticz/mdah/

[Knight]

I Found where the Deb files are

http://e-nef.com/domoticz/mdah/dists/bu ... ary-armhf/


But when I run "sudo dpkg -i node-mydomoathome-0.2.45.deb"

pi@raspberrypi:~ $ sudo dpkg -i node-mydomoathome-0.2.45.deb
(Läser databasen ... 103577 filer och kataloger installerade.)
Förbereder att packa upp node-mydomoathome-0.2.45.deb ...
dpkg: fel vid hantering av arkivet node-mydomoathome-0.2.45.deb (--install):
conffile name 'etc/mydomoathome/config.json' is not an absolute pathname
Fel uppstod vid hantering:
node-mydomoathome-0.2.45.deb

[epierre]

hmmm...surprising, try this one (should be the same cannot test it...)

https://www.e-nef.com/domoticz/mdah/dis ... ary-armhf/

[Knight]

Can it be a problem with "bullseye"? with rasp 4 ( I have a Rasp2 with working mydomoathome)

I have problem with the first steps.


nodejs is already the newest version (12.22.5~dfsg-2~11u1).
(Updated)
manage to update to nodejs 14.18.3-deb-1nodesource1
same problem

[epierre]

I would have to install a pi with it to check...

[Knight]

Im stuck. I broke the OS so i have to reinstall the Debian Bullseye

I really want it to work..


I have found a solution "work around" with ImperieHome

Download it from https://oceanofapk.com/imperihome-smart ... -download/

and restore an old backup then you are in

[Knight]

I would have to install a pi with it to check...

Hello, did you get it to work?

[Knight]

I think there's a compatibility issue with debian bullseye. I have installed a new fresh version of bullesyes with desktop. You can install .deb files directly on the desktop. However, the operating system does not approve this .deb file and I get an error message.

I will try to install the deb file on a fresh iso "buster with desktop"

[Knight]

It works flawlessly to install it on a newly installed version of Buster.

Code

Code: Select all

sudo apt update

Code: Select all

sudo apt upgrade

Code: Select all

sudo apt install nodejs npm

Installs the latest versions of both nodejs and nom

then download mydomoathome

Code: Select all

wget http://www.e-nef.com/domoticz/mdah/node-mydomoathome-latest.deb

install domoathome

Code: Select all

sudo dpkg -i node-mydomoathome-latest.deb

Bulleyes.... no luck there. Error "conffile name 'etc/mydomoathome/config.json' is not an absolute pathname"

empierre, if you have time over. I can place a donation true paypal
…

[epierre]

can try testing it, writing the sdcard on a pi 3.

Are you running a lite or with ui and recommended ?

[epierre]

Hello,

For Debian 11/Bullseye here is the procedure

curl -fsSL https://deb.nodesource.com/setup_12.x | sudo -E bash -
sudo apt-get install -y nodejs
wget https://www.e-nef.com/domoticz/mdah/dis ... 0.2.49.deb
sudo dpkg -i node-mydomoathome-0.2.49.deb