Dashticz v3.6 master
Moderators: leecollings, htilburgs, robgeerts
-
- Posts: 2262
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v3.6 master
Do you see issues with all your graphs?
Can you post the code from CONFIG.js for a graph with problems?
Sent from my SM-A320FL using Tapatalk
Can you post the code from CONFIG.js for a graph with problems?
Sent from my SM-A320FL using Tapatalk
-
- Posts: 15
- Joined: Sunday 16 December 2018 12:45
- Target OS: NAS (Synology & others)
- Domoticz version: 2020.1
- Contact:
Re: Dashticz v3.6 master
Yes , I have 2 graphs and both have the same problem.
Also the icons are disappeared from nu.nl and nos.nl
my config.js of the graphs:
// Definition 'Elektriciteit' graph
blocks[p1_grafiek_elektra] = {
title: 'Energie',
graph: ['line','bar','bar'],
custom : {
"vandaag": {
range: 'day',
filter: '12 hours',
data: {
netto: 'd.v+d.v2-d.r1-d.r2',
gebruikt: 'd.v+d.v2',
geleverd: '-d.r1-d.r2'
}
},
"maand": {
range: 'month',
filter: '1 months',
data: {
netto: 'd.v+d.v2-d.r1-d.r2',
gebruikt: 'd.v+d.v2',
geleverd: '-d.r1-d.r2'
}
},
"jaar": {
range: 'year',
filter: '12 months',
data: {
netto: 'd.v+d.v2-d.r1-d.r2',
gebruikt: 'd.v+d.v2',
geleverd: '-d.r1-d.r2'
}
}
},
legend: true,
datasetColors:['blue','red','yellow']
}
// Definition 'Gas' graph
blocks[p1_grafiek_gas] = {
title: 'Gas',
width: 12,
height: '425px',
custom : {
"dag": {
graph: 'bar',
range: 'day',
filter: '24 hours',
data: {
Gas: 'd.v'
}
},
"maand": {
graph: 'bar',
range: 'month',
data: {
Gas: 'd.v'
},
},
"jaar": {
graph: 'line',
range: 'year',
data: {
Gas: 'd.v'
}
},
},
legend: false,
datasetColors: ['yellow'],
displayFormats : {
minute: 'h:mm',
hour: 'h:mm',
day: 'DD MMM',
week: 'DD MMM',
month: 'MMM',
}
}
Also the icons are disappeared from nu.nl and nos.nl
my config.js of the graphs:
// Definition 'Elektriciteit' graph
blocks[p1_grafiek_elektra] = {
title: 'Energie',
graph: ['line','bar','bar'],
custom : {
"vandaag": {
range: 'day',
filter: '12 hours',
data: {
netto: 'd.v+d.v2-d.r1-d.r2',
gebruikt: 'd.v+d.v2',
geleverd: '-d.r1-d.r2'
}
},
"maand": {
range: 'month',
filter: '1 months',
data: {
netto: 'd.v+d.v2-d.r1-d.r2',
gebruikt: 'd.v+d.v2',
geleverd: '-d.r1-d.r2'
}
},
"jaar": {
range: 'year',
filter: '12 months',
data: {
netto: 'd.v+d.v2-d.r1-d.r2',
gebruikt: 'd.v+d.v2',
geleverd: '-d.r1-d.r2'
}
}
},
legend: true,
datasetColors:['blue','red','yellow']
}
// Definition 'Gas' graph
blocks[p1_grafiek_gas] = {
title: 'Gas',
width: 12,
height: '425px',
custom : {
"dag": {
graph: 'bar',
range: 'day',
filter: '24 hours',
data: {
Gas: 'd.v'
}
},
"maand": {
graph: 'bar',
range: 'month',
data: {
Gas: 'd.v'
},
},
"jaar": {
graph: 'line',
range: 'year',
data: {
Gas: 'd.v'
}
},
},
legend: false,
datasetColors: ['yellow'],
displayFormats : {
minute: 'h:mm',
hour: 'h:mm',
day: 'DD MMM',
week: 'DD MMM',
month: 'MMM',
}
}
-
- Posts: 15
- Joined: Sunday 16 December 2018 12:45
- Target OS: NAS (Synology & others)
- Domoticz version: 2020.1
- Contact:
Re: Dashticz v3.6 master
Is this what you meant?
var p1_elektra_nu = '56_1';
var p1_elektra_vandaag = '56_2';
var p1_elektra_totaal = '56_3';
var p1_grafiek_gas = 'graph_57';
var p1_grafiek_elektra = 'graph_56';
var p1_elektra_nu = '56_1';
var p1_elektra_vandaag = '56_2';
var p1_elektra_totaal = '56_3';
var p1_grafiek_gas = 'graph_57';
var p1_grafiek_elektra = 'graph_56';
-
- Posts: 82
- Joined: Tuesday 04 February 2020 11:42
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: The Netherlands
- Contact:
Re: Dashticz v3.6 master
I use an older tablet (Samsung Galaxy Tab 3) for Dashticz, since 3.6 the OWM data isn't visible anymore. I tried an incognito tab, cleared browser data and cookies, restarted, but no luck. On every other devices the data is visible. I guess this is because of the older Android version (4.4.2). I'm tried Chrome and Fully Kiosk Browser. Does this have anything to do with CORS not being supported?
-
- Posts: 2262
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v3.6 master
Yes, thanks.
I cannot completely reproduce your issue, but I've fixed some bugs that might have caused this.
Can you test latest beta? (3.6.2)
-
- Posts: 2262
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v3.6 master
For the missing icons: which icons do you mean exactly? Can you attach a screenshot?
If you use an icon from fontawesome check whether the icon still exists (fontawesome.com).
Sometimes you have to completely refresh the cache.
-
- Posts: 2262
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v3.6 master
Yes, could be.Jimster wrote: ↑Tuesday 29 September 2020 21:19 I use an older tablet (Samsung Galaxy Tab 3) for Dashticz, since 3.6 the OWM data isn't visible anymore. I tried an incognito tab, cleared browser data and cookies, restarted, but no luck. On every other devices the data is visible. I guess this is because of the older Android version (4.4.2). I'm tried Chrome and Fully Kiosk Browser. Does this have anything to do with CORS not being supported?
As a small test, can you try the following:
In the file ./js/weather_owm.js, line 63, remove the first two slashes.
So change:
Code: Select all
// _CORS_PATH +
Code: Select all
_CORS_PATH +
-
- Posts: 82
- Joined: Tuesday 04 February 2020 11:42
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: The Netherlands
- Contact:
Re: Dashticz v3.6 master
Yes, it works now.Lokonli wrote: ↑Tuesday 29 September 2020 22:48Yes, could be.Jimster wrote: ↑Tuesday 29 September 2020 21:19 I use an older tablet (Samsung Galaxy Tab 3) for Dashticz, since 3.6 the OWM data isn't visible anymore. I tried an incognito tab, cleared browser data and cookies, restarted, but no luck. On every other devices the data is visible. I guess this is because of the older Android version (4.4.2). I'm tried Chrome and Fully Kiosk Browser. Does this have anything to do with CORS not being supported?
As a small test, can you try the following:
In the file ./js/weather_owm.js, line 63, remove the first two slashes.
So change:intoCode: Select all
// _CORS_PATH +
Code: Select all
_CORS_PATH +
-
- Posts: 2262
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v3.6 master
hmm, interesting.Jimster wrote: ↑Tuesday 29 September 2020 23:25Yes, it works now.Lokonli wrote: ↑Tuesday 29 September 2020 22:48Yes, could be.Jimster wrote: ↑Tuesday 29 September 2020 21:19 I use an older tablet (Samsung Galaxy Tab 3) for Dashticz, since 3.6 the OWM data isn't visible anymore. I tried an incognito tab, cleared browser data and cookies, restarted, but no luck. On every other devices the data is visible. I guess this is because of the older Android version (4.4.2). I'm tried Chrome and Fully Kiosk Browser. Does this have anything to do with CORS not being supported?
As a small test, can you try the following:
In the file ./js/weather_owm.js, line 63, remove the first two slashes.
So change:intoCode: Select all
// _CORS_PATH +
Code: Select all
_CORS_PATH +
I have to check why it doesn't work on Android 4.4.2 without CORS proxy.
-
- Posts: 2262
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v3.6 master
I've slightly changed the request to OpenWeatherMap, which might solve the CORS issue on Android 4.4.2.Jimster wrote: ↑Tuesday 29 September 2020 23:25Yes, it works now.Lokonli wrote: ↑Tuesday 29 September 2020 22:48Yes, could be.Jimster wrote: ↑Tuesday 29 September 2020 21:19 I use an older tablet (Samsung Galaxy Tab 3) for Dashticz, since 3.6 the OWM data isn't visible anymore. I tried an incognito tab, cleared browser data and cookies, restarted, but no luck. On every other devices the data is visible. I guess this is because of the older Android version (4.4.2). I'm tried Chrome and Fully Kiosk Browser. Does this have anything to do with CORS not being supported?
As a small test, can you try the following:
In the file ./js/weather_owm.js, line 63, remove the first two slashes.
So change:intoCode: Select all
// _CORS_PATH +
Code: Select all
_CORS_PATH +
Can you help with testing? I don't have an android 4.4.2 device.
The new new file can be downloaded from:
https://raw.githubusercontent.com/Dasht ... her_owm.js
or:
switch to the git branch 'testowm'
-
- Posts: 82
- Joined: Tuesday 04 February 2020 11:42
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: The Netherlands
- Contact:
Re: Dashticz v3.6 master
I did git checkout testownLokonli wrote: ↑Wednesday 30 September 2020 14:28I've slightly changed the request to OpenWeatherMap, which might solve the CORS issue on Android 4.4.2.Jimster wrote: ↑Tuesday 29 September 2020 23:25Yes, it works now.Lokonli wrote: ↑Tuesday 29 September 2020 22:48
Yes, could be.
As a small test, can you try the following:
In the file ./js/weather_owm.js, line 63, remove the first two slashes.
So change:intoCode: Select all
// _CORS_PATH +
Code: Select all
_CORS_PATH +
Can you help with testing? I don't have an android 4.4.2 device.
The new new file can be downloaded from:
https://raw.githubusercontent.com/Dasht ... her_owm.js
or:
switch to the git branch 'testowm'
Tested it, but unfortunately it doesn't work.
-
- Posts: 2262
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v3.6 master
ok, thanks for testing.
I'll add an additional config setting ...
I'll add an additional config setting ...
-
- Posts: 2262
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v3.6 master
I've created a new beta.Jimster wrote: ↑Wednesday 30 September 2020 16:34I did git checkout testownLokonli wrote: ↑Wednesday 30 September 2020 14:28I've slightly changed the request to OpenWeatherMap, which might solve the CORS issue on Android 4.4.2.
Can you help with testing? I don't have an android 4.4.2 device.
The new new file can be downloaded from:
https://raw.githubusercontent.com/Dasht ... her_owm.js
or:
switch to the git branch 'testowm'
Tested it, but unfortunately it doesn't work.
Add the following to CONFIG.js to enable the CORS proxy for OWM:
Code: Select all
config['use_cors'] = 1;
-
- Posts: 15
- Joined: Sunday 16 December 2018 12:45
- Target OS: NAS (Synology & others)
- Domoticz version: 2020.1
- Contact:
Re: Dashticz v3.6 master
I have tested the latest beta date 30-9-2020 but stil no graph.
The icons are nu.nl.png and nos.png
- Attachments
-
- Icon aanwezig.png (36.62 KiB) Viewed 1700 times
-
- Icon weg.png (3.89 KiB) Viewed 1700 times
-
- Grafiek leeg V3.6 (ook bij beta).png (25.96 KiB) Viewed 1700 times
-
- Posts: 2262
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v3.6 master
hmm, annoying.Remelco wrote: ↑Wednesday 30 September 2020 21:22I have tested the latest beta date 30-9-2020 but stil no graph.
The icons are nu.nl.png and nos.png
Can you open DevTools in Chrome by pressing F12. Then refresh Dashticz. Do you see any error in the DevTools console tab?
or failed network requests on the DevTools network tab?
-
- Posts: 82
- Joined: Tuesday 04 February 2020 11:42
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: The Netherlands
- Contact:
Re: Dashticz v3.6 master
Yes with the latest beta and adding this line it works now. Thanks!Lokonli wrote: ↑Wednesday 30 September 2020 20:48
I've created a new beta.
Add the following to CONFIG.js to enable the CORS proxy for OWM:Can you test the latest beta?Code: Select all
config['use_cors'] = 1;
-
- Posts: 2262
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v3.6 master
Found it. Totally forgot the following:Remelco wrote: ↑Wednesday 30 September 2020 21:22I have tested the latest beta date 30-9-2020 but stil no graph.
The icons are nu.nl.png and nos.png
The graph now support 'multidevices'
However, that means in the custom graph you have to add the device id to the value, as follows:
Code: Select all
blocks[p1_grafiek_gas] = {
title: 'Gas',
width: 12,
height: '425px',
custom : {
"dag": {
graph: 'bar',
range: 'day',
filter: '24 hours',
data: {
Gas: 'd.v_57' //_57 added
}
},
"maand": {
graph: 'bar',
range: 'month',
data: {
Gas: 'd.v_57' //_57 added
},
},
"jaar": {
graph: 'line',
range: 'year',
data: {
Gas: 'd.v_57' //_57 added
}
},
},
legend: false,
datasetColors: ['yellow'],
displayFormats : {
minute: 'h:mm',
hour: 'h:mm',
day: 'DD MMM',
week: 'DD MMM',
month: 'MMM',
}
}
-
- Posts: 15
- Joined: Sunday 16 December 2018 12:45
- Target OS: NAS (Synology & others)
- Domoticz version: 2020.1
- Contact:
Re: Dashticz v3.6 master
For the gas the graph is is working.Lokonli wrote: ↑Wednesday 30 September 2020 22:41Found it. Totally forgot the following:
The graph now support 'multidevices'
However, that means in the custom graph you have to add the device id to the value, as follows:That should do it ...Code: Select all
blocks[p1_grafiek_gas] = { title: 'Gas', width: 12, height: '425px', custom : { "dag": { graph: 'bar', range: 'day', filter: '24 hours', data: { Gas: 'd.v_57' //_57 added } }, "maand": { graph: 'bar', range: 'month', data: { Gas: 'd.v_57' //_57 added }, }, "jaar": { graph: 'line', range: 'year', data: { Gas: 'd.v_57' //_57 added } }, }, legend: false, datasetColors: ['yellow'], displayFormats : { minute: 'h:mm', hour: 'h:mm', day: 'DD MMM', week: 'DD MMM', month: 'MMM', } }
I am only struggling with the elecric graph. Where can I add the d.v. to d.v._56.
This is not working:
data: {
netto: 'd.v_56+d.v2-d.r1-d.r2',
gebruikt: 'd.v_56+d.v2',
geleverd: '-d.r1-d.r2'
-
- Posts: 2262
- Joined: Monday 29 August 2016 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v3.6 master
try:
Code: Select all
data: {
netto: 'd.v_56+d.v2_56-d.r1_56-d.r2_56',
gebruikt: 'd.v_56+d.v2_56',
geleverd: '-d.r1_56-d.r2_56'
Who is online
Users browsing this forum: No registered users and 1 guest